Products results

PBY Plastics PB21000M is a compression molded virgin Poly(Fluorinated Ethylene-Propylene) copolymer (FEP) premium grade.

Miracll Chemicals E 185 is a polyester-based thermoplastic polyurethane used for wide variety of applications.

The Addisil™ IND 1070 E series is a one-component heat curable rubber for making elastomers (HCE) with a hardness range between 50 and 80° Shore A for industrial applications. This series is based on a platinum cure system, which is particularly suitable for high value extrusion applications where regulatory compliance, transparency, mechanical performance and/or productivity are important. Application examples are oven door profiles and tubing for food applications.Key Features and Benefits High transparency, no yellowing Excellent mechanical properties Dry, non-stick surface Odorless during processing and in its application Fast curing One-component, ready to use Shelf life of 3 months as of manufacturing date Suitable for compliance with the food contact regulations FDA 21 CFR 177.2600 and the BfR section XV recommendations.

Silopren™ LSR 4070 is a two-component liquid silicone rubber for injection molding processes. Silopren™ LSR 4070 can be used to produce medical technical articles with high transparency and excellent rubber elastic properties.Key Features and BenefitsVulcanisates consisting of Silopren™ LSR 4070 are distinguished by the following properties: Excellent biocompatibility High stability to ozone and ultraviolet light Neutral odor and taste Sterilisable with ethylene oxide, steam and gamma radiation Good transparency High thermal stability High recovery after puncture Easy pigmentable with the LSR Color Pastes Potential ApplicationsBecause of the outstanding properties Silopren™ LSR 4070 is particularly suitable for the following elastomeric articles: sealing elements, respiratory devices, vibration dampers, tube connectors, pipette nipples, catheters, parts for medical technical equipment, mats s.o.

Silopren™ LSR 4660 is a two-component liquid silicone rubber for injection molding processes. The material performance is particularly characterized by high reactivity, low viscosity and high tear strength. The LSR 4660 enables particularly the production of parts for healthcare devices covering by USP Class VI such as sealing elements, O-rings, diaphragms, ear plugs, bellows, baby teats, respiratory devices, air vent flaps, tube connectors, catheters and mats.Key Features and BenefitsVulcanisates consisting of LSR 4660 are distinguished by the following properties: low viscosity and fast cure high tear strength sterilisable with ethylene oxide, steam and gamma radiation long service life at dynamic stress neutral odor and taste high recovery after puncture high temperature stability FDA 21 CFR 177.2600 compliance with US Pharmacopeia XXIII, Class VI (maximum contact time with human tissue 28 days).

Bactiglas™ Wells Plastics Antimicrobials is being successfully used in medical, healthcare and white goods applications with and has FDA, EPA and EFSA food contact registration and approvals.

Rubaloy RA - 7573 is a high performance grade, offering excellent ozone, oil and abrasion resistance. It is non-staining and is made from 70% medium ACN content NBR and 30% from PVC Resin.

TAC/GR 50 is a 50 % and TAC/GR 70 a 70 % triallylcyanurate (TAC) in granular form. TAC/GR gran-ules are more stable and better applicable in automatic weighing machines than TAC/GR 70, whereas the latter contains a higher amount of active substance.

Vetronite® EGS 102 T is composed of epoxy resin and glass fabric reinforement.

LIM™ 6030 liquid silicone rubber is a 2-component product formulated for use in liquid injection molding to high performance elastomeric parts. It is clear, but easily pigmentable with Momentive masterbatch colors. The combination of excellent tear strength and very high tensile strength makes this product suitable for a wide variety of applications. Mechanical parts such as connector inserts, seals, flexible mounts, and valve parts can be made readily from LIM 6030 liquid silicone rubber.Key Features and Benefits High clarity for excellent visibility Excellent tear strength Convenient 1:1 mix ratio for use with automatic equipment Rapid cure time: 10 to 40 seconds depending upon part size, configuration, and molding temperature Wide range of molding temperatures: 150°C (302°F) to 205°C (400°F) Excellent release from metal molds Potential Applications sports goggles and masks health care equipment camera parts coating metal rolls.

Paracril OZO3996 is a pre-fluxed blend of NBR/PVC containing 40% PVC.

This product is a polyurethane system. Mechanical data according to test pieces post-cured for 8 hrs. at 80°C. No heavy chemical and mechanical stress before 7 days after curing at room temperature (20-23°C).

MARFRAN.MED® ST has a high versatility to satisfy every request, all materials can be colored and available in transparent or crystal, suitable for both production by injection molding and for extrusion.

PharMed PharMed Tubing is a Thermoplastic Elastomer (TPE) product. It is available in North America. Applications of PharMed PharMed Tubing include medical/healthcare, food contact applications and plumbing/piping/potable water.Characteristics include: Chemical Resistant UV Resistant

Fainplast Compounds Fainplast™ PVC MPH 87 is a Flexible Polyvinyl Chloride product. It can be processed by extrusion and is available in Africa & Middle East, Asia Pacific, Europe, Latin America, or North America. Applications of Fainplast PVC MPH 87 include medical/healthcare and hose/tubing.

Fainplast Compounds Fainplast™ PVC PG 83 is a Polyvinyl Chloride + NBR (PVC+NBR) product. It can be processed by extrusion and is available in Africa & Middle East, Asia Pacific, Europe, Latin America, or North America. Typical Applications include Hose/Tubing.

Elastocon® 2865PE thermoplastic elastomer has been developed for applications that require rubber-like properties and a good surface finish. Elastocon® 2865PE is FDA compliant and well suited for consumer goods and industrial applications requiring U.V. stability. Elastocon® 2865PE can be overmolded and coextruded with polyethylene.Elastocon® 2865PE is supplied as ready to use pellets in 50 lb. quantities.

Elastocon® 8078N is a colorable thermoplastic elastomer formulated for applications that require rubber-like properties and a good surface finish. Elastocon® 8078N is FDA compliant and well suited for consumer goods and industrial applications requiring U.V. stability. Elastocon® 8078N can be overmolded to polypropylene.Elastocon® 8078N is supplied as ready to use pellets in 1000 lb. quantities.

The Addisil™ 442 E series is a two-component heat curable rubber for making elastomers (HCE) with a hardness range between 40 and 80 Shore A for medical applications. This series is based on a platinum cure system, which is particularly suitable for high value extrusion applications where regulatory compliance, transparency, mechanical performance and/or productivity are important. The series is especially suitable for the manufacture of extruded transparent tubing and profiles for use in healthcare applications.Key Features and Benefits- High transparency, no yellowing Excellent mechanical properties Dry, non-stick surface Odorless during processing and in its application Fast curing Long shelf-life of 6 months for the single component if stored appropriately Very long pot life of 2 to 4 weeks for the mixed components.

The Addisil™ IND 1050 E series is a one-component heat curable rubber for making elastomers (HCE) with a hardness range between 50 and 80° Shore A for industrial applications. This series is based on a platinum cure system, which is particularly suitable for high value extrusion applications where regulatory compliance, transparency, mechanical performance and/or productivity are important. Application examples are oven door profiles and tubing for food applications.Key Features and Benefits High transparency, no yellowing Excellent mechanical properties Dry, non-stick surface Odorless during processing and in its application Fast curing One-component, ready to use Shelf life of 3 months as of manufacturing date Suitable for compliance with the food contact regulations FDA 21 CFR 177.2600 and the BfR section XV recommendations.

Fainplast Compounds Fainplast™ PVC MPH 67 is a Flexible Polyvinyl Chloride product. It can be processed by extrusion and is available in Africa & Middle East, Asia Pacific, Europe, Latin America, or North America. Applications of Fainplast PVC MPH 67 include medical/healthcare and hose/tubing.

Franplast Fatty food USP Cl. VI is the new crystal clear TPE compound, based on SEBS, suitable for contact with fatty food in accordance with the European Regulations. It is completely compliant with 10/2011/EU and also 1907/2006/CE, ROHS, RAEE, WEEE, ELV, EN71/3. This innovative compound is characterized by an extremely low migration level, when in contact with simulant D2 (olive oil). Chemiton for fatty food can be processed with conventional plastic processing technology such as injection molding and extrusion. Other important features are the extremely high resistance to alcohols and the sterilization by steam-autoclave.

Sylvin Technologies Sylvin™ 5132-70UV Clear is a clear vinyl compound formulated for wire insulating applications such as speaker wire, booster cable, and extruded tubing. This compound contains an ultra violet stabilizer and can be color matched to a variety of colors.

Silopren™ LSR 2650 is a two-component liquid silicone rubber for injection molding processes. In comparison to Silopren™ LSR 2050, Silopren™ LSR 2650 shows a lower viscosity, improved tear resistance and a higher reactivity. Therefore, it is also possible to reduce the vulcanization temperature while maintaining a standard crosslinking rate. The increased reactivity does not affect the properties of the vulcanizate.Key Features and BenefitsVulcanizates of Silopren™ LSR 2650 are typically distinguished by the following properties: High reactivity, lower viscosity, shorter cycle time Excellent thermal stability Biocompatible Sterilizable with ethylene oxide, steam and gamma radiation High stability and flexibility at low temperatures Good rubber-like properties, high tear resistance Long service life at dynamic stress High stability to ozone and ultraviolet light Outstanding resistance to aging Excellent dielectric behavior over a wide range of temperatures Easily pigmentable with LSR color pastes KTW approved Potential ApplicationsBecause of its outstanding properties, Silopren™ LSR 2650 is an excellent candidate to consider for the following elastomeric articles: Sealing elements O-rings Stoppers Diaphragms Keypads Bellows Catheters Pacifiers Baby teats Respiratory devices Vibration dampers Air vent flaps Switch cover Breast shields Nose pads Pressure cookers parts Spark plug boots Cable connectors Catheters, parts of medical technical equipment s.o.

Sylvin Technologies Sylvin™ 5132-75UV Clear is a clear vinyl compound formulated for wire insulating applications such as speaker wire, booster cable, and extruded tubing. This compound contains an ultra violet stabilizer and can be color matched to a variety of colors.

KD Chem LX-400 is Provide excellent heat stability, lubrication, and weatherability. One-pack type stabilizers for flexible and semi-rigid applications with fast gelling speed. Improved heat stability when used with epoxidized soybean oil. LX-824 is economical.

Black 6679 is an economy recycled PE based masterbatch containing high opacity carbon black. This product is designed for injection molding items, extruded tubings and sheets for general purpose.

Dispergator KB contains 25 % more active material and less moisture than Dispergator DS. It fa-vourably can be used in all rubber compounds which are intended to be cured by UHF, LCM or hot air. It also has good compatibility with most polymers.

Supreme Petrochem SC201LV is Suitable for large volume clear molded products Refrigerator components like crisper trays, egg shells etc.

The Addisil™ 480 E series is a one-component heat curable rubber for making elastomers (HCE) with a hardness range between 40 and 80 Shore A for medical applications. This series is based on a platinum cure system, which is particularly suitable for high value extrusion applications where regulatory compliance, transparency, mechanical performance and/or productivity are important. The series is especially suitable for the manufacture of extruded transparent tubing and profiles for use in healthcare applications.Key Features and Benefits- High transparency, no yellowing Excellent mechanical properties Dry, non-stick surface Odorless during processing and in its application Fast curing One-component, ready to use Shelf life of 3 months from date of manufacture.

PermaFelx® 55 is a family of thermoplastic elastomers designed in a range of durometers for maximum versatility. Performance-tested, PermaFlex delivers superior results compared to rubber, TPEs and other elastomers. As opposed to cured rubber, PermaFlex can be re-ground and re-molded many times. It processes with less waste and no sulfur pollution.

This product is a polyurethane system. After use please close the containers carefully. The product can be subject to color variations due to raw materials, but these color variations have no influence on the quality and the properties of the product. Seal porous mold surfaces first (ebalta mold sealer). For optimum mold releasing we recommend a special release agent (like T1-1), which can be applied easily with a brush or be sprayed. Releasing of the mold 2-3 times, evaporate for about 20 min. after each releasing.

Silopren™ LSR 2665 by Momentive Performance Materials is comprised of Silicone Elastomer. It is commonly used as Molding Resin for a variety of applications in Aerospace, Automotive and Aviation. It is available in Liquid form.

Polyplastics Group Topas® 8007S-04Product DescriptionTOPAS 8007S-04 is a general purpose injection molding grade. It is a glass-clear amorphous polymer with outstanding moisture barrier, chemical resistance, high purity and a non-reactive surface making it an excellent choice for healthcare and other high-tech products. Lower leachables and extractables of TOPAS COC preserve content stability and quality. It is a non-polar substrate that does not promote adsorption, denaturation, aggregation, or precipitation like glass can. Analytical results are more accurate with TOPAS COC in contact with sensitive chemistries.Selected Applications Drug delivery Prefilled syringes, vials, cartridges Bottles and tubes Surgical instruments IV containers and components Labware Optics Electronics Food packaging Healthcare and food contact Leading Attributes Low leachables & extractables, low water transmission Non-ionic, does not promote adsorption like glass Minimally reactive Chemically resistant to alcohol, acetone, and acrylates Transparent, withstands EtO and gamma sterilization Temperature resistance, clarity and purity Clarity, low birefringence, low moisture sensitivity Low dielectric constant, thermoplastic Not manufactured with BPA, phthalates, or halogens Broad regulatory compliance Related Grades for Injection Molding, Healthcare, Optics and Diagnostics TOPAS 8007X10 - our highest ultraviolet (UV) transmission grade Topas® 8007S-04Topas® 8007S-04 is a Cyclic Olefin Copolymer (COC) product. It is available in Asia Pacific.Characteristics include: Flame Rated Copolymer

LIM™ 6071 is the next generation in 70-durometer liquid silicone rubber. It is a two-component product formulated for use in liquid injection molding to produce high performance parts. It is clear, but easily pigmentable with Momentive masterbatch colors. The combination of excellent tear strength and very high tensile strength makes this product suitable for a wide variety of applications. Mechanical parts such as connector inserts, seals, flexible mounts, and valve parts can be made readily from LIM6071 liquid silicone rubber.Key Features and Benefits High clarity for excellent visibility Excellent tear strength Convenient 1:1 mix ratio for use with automatic equipment Rapid cure time: 10 to 40 seconds depending upon part size, configuration and molding temperature Wide range of molding temperatures: 150°C (302°F) to 232°C (450°F) Excellent release from metal molds High Bayshore resilience Potential Applications Sports goggles and masks Health care profiles Camera parts Metal roll coatings.

Goodyear Rubber Company of So. California Silicone rubber is an elastomer different from other rubbers in that it has an inorganic backbone made of silicon and oxygen atoms. Organic rubbers have a carbon-carbon chain atomic structure. The outstanding physical property of silicone is its’ retention of flexibility and tensile strength at relatively high and low temperatures, from -150 F to 600 F. Silicones are very flexible due to large bond angles and bond lengths compared to basic organic polymers. Silicone rubber is a material of choice where retention of shape and mechanical strength are desired under heavy thermal stress or sub-zero temperatures. Silicone rubber is highly inert and does not react with most chemicals and due to its structural properties, it is widely used in aircraft engine parts, door and window sealing parts, healthcare and medical applications including implants.