Products results

Elastocon® 8028N is a colorable thermoplastic elastomer formulated for applications that require rubber-like properties and a good surface finish. Elastocon® 8028N is FDA compliant and well suited for consumer goods and industrial applications requiring U.V. stability. Elastocon® 8028N can be overmolded to polypropylene.Elastocon® 8028N is supplied as ready to use pellets in 50 lb. bag quantities.

Silopren™ LSR 4660 is a two-component liquid silicone rubber for injection molding processes. The material performance is particularly characterized by high reactivity, low viscosity and high tear strength. The LSR 4660 enables particularly the production of parts for healthcare devices covering by USP Class VI such as sealing elements, O-rings, diaphragms, ear plugs, bellows, baby teats, respiratory devices, air vent flaps, tube connectors, catheters and mats.Key Features and BenefitsVulcanisates consisting of LSR 4660 are distinguished by the following properties: low viscosity and fast cure high tear strength sterilisable with ethylene oxide, steam and gamma radiation long service life at dynamic stress neutral odor and taste high recovery after puncture high temperature stability FDA 21 CFR 177.2600 compliance with US Pharmacopeia XXIII, Class VI (maximum contact time with human tissue 28 days).

Elastocon® CLR75 is a transparent thermoplastic elastomer that has been developed for applications that require oil/plasticizer free, non-blooming high strength properties and a tactile surface finish. Elastocon® CLR75 is FDA compliant and well suited for consumer goods and industrial applications requiring U.V. stability. Elastocon® CLR75 can be overmolded onto polypropylene.Elastocon® CLR75 is supplied as ready to use pellets in 1000 lb. quantities.

BROMOBUTYL RUBBER is obtained by bromination of butyl rubber with unsaturation of minimum 1.5 mol%

LIM™ 6050-D2 liquid silicone rubber is a 2-component product formulated for use in liquid injection molding to high performance elastomeric parts. It is clear, but easily pigmentable with Momentive Performance Materials masterbatch colors. LIM6050-D2 offers convenient 1:1 mix ratio, high tear strength, and easy release from molds. Cure time is rapid, generally 10 to 40 seconds (@ 150-205°C) depending upon part size, configuration, and molding temperature.Key Features and BenefitsLIM6050-D2 liquid silicone rubber is distinguished by the following properties: High clarity for excellent visibility Excellent tear strength Convenient 1:1 mix ratio for use with automatic equipment Rapid cure time: 10 to 40 seconds depending upon part size, configuration, and molding temperature Wide range of molding temperatures: 150°C (302°F) to 205°C (400°F) Excellent release from metal molds Potential ApplicationsThe combination of excellent clarity, tear strength and very high tensile strength makes this product suitable for a wide variety of applications. Baby bottle nipples Connector inserts Seals Flexible mounts Valves Sports goggles Masks Health care equipment Camera parts Coating metal rolls.

Kettlitz-Dispergator DS is a dispersing agent improving flow and extrusion properties of rubber compounds. The material, based on a water-in-oil emulsion of higher alcohols, esters and aliphatic fatty acids, is recommended to be used in EPDM and EPM, in NBR and butyl rubber compounds.

Elastocon® CLR45 by Elastocon TPE Technologies is comprised of Thermoplastic Elastomer (unspecified). It is commonly used as Extrusion Resin and Molding Resin for a variety of applications. It is available in Pellets form.

LIM™ 6061 is the next generation in 60-durometer liquid silicone rubber. It is a two-component product formulated for use in liquid injection molding to produce high performance parts. It is clear, but easily pigmentable with Momentive masterbatch colors. The combination of excellent tear strength and very high tensile strength makes this product suitable for a wide variety of applications. Mechanical parts such as connector inserts, seals, flexible mounds, and valve parts can be made readily from LIM6061 liquid silicone rubber.Key Features and Benefits High clarity for excellent visibility Excellent tear strength Convenient 1:1 mix ratio for use with automatic equipment Rapid cure time: 10 to 40 seconds depending upon part size, configuration and molding temperature Wide range of molding temperatures: 150°C (302°F) to 232°C (450°F) Excellent release from metal molds High Bayshore resilience Potential Applications sports goggles and masks health care profiles camera parts coating metal rolls.

Elastocon® 8058HL is a colorable thermoplastic elastomer formulated for applications that require rubber-like properties and a reduced coefficient of friction. Elastocon® 8058HL is FDA compliant and well suited for consumer goods and industrial applications requiring U.V. stability. Elastocon® 8058HL can be overmolded to polypropylene.Elastocon® 8058HL is supplied as ready to use pellets in 1000 lb. quantities.

Mediaplast PM is a synthetic aromatic plasticizer based on polyalkylbenzene (bi- and trialkylated aro-matics), which is mainly recommended for the use in elastomers with low to medium polarity, i. e. NR, IIR, BR, SBR, EP(D)M for example, but also CR, CM/CSM, EVA and PNR. Especially in polychloro-prene the often used, expensive ester plasticizers can be replaced completely.

Rubaloy RA - 7380 is a non-staining, oil, ozone, abrasion, weather and flex resistant polymer using medium ACN (33%) content Acrylonitrile Butadiene Rubber and a special grade of Poly Vinyl Chloride Resin. This grade has improved Tensile, Elongation, Compression Set, Oil Swelling and Processibility.

Franplast Fatty food USP Cl. VI is the new crystal clear TPE compound, based on SEBS, suitable for contact with fatty food in accordance with the European Regulations. It is completely compliant with 10/2011/EU and also 1907/2006/CE, ROHS, RAEE, WEEE, ELV, EN71/3. This innovative compound is characterized by an extremely low migration level, when in contact with simulant D2 (olive oil). Chemiton for fatty food can be processed with conventional plastic processing technology such as injection molding and extrusion. Other important features are the extremely high resistance to alcohols and the sterilization by steam-autoclave.

Fainplast Compounds Fainplast™ PVC MPH 50/T is a Flexible Polyvinyl Chloride product. It can be processed by extrusion and is available in Africa & Middle East, Asia Pacific, Europe, Latin America, or North America. Applications of Fainplast PVC MPH 50/T include engineering/industrial parts, hose/tubing and medical/healthcare.

TAIC 50 and 70 are 50 % resp. 70 % preparations of triallylisocyanurate (TAIC) on extremely fine silica as carrier in powder form. TAIC can be recommended especially as co-activator for peroxide curing, when excellent physical properties are to be reached, especially very low compression-set values even after aging and under extreme conditions.

Zeus Industrial Products Reinforced Polyimide Tubing is a class of high performing polymers well established in industry for their outstanding chemical, thermal, and mechanical performance properties. Polyimides also exhibit good dielectric properties giving them substantial presence in a number of electrical applications. Zeus polyimide tubing brings these properties and more for both medical and non-medical precision tubing applications. Polyimide tubing provides excellent strength and abrasion resistance. Polyimide tubing also maintains its properties even at very small dimensions. For applications where additional lubricity is needed, PI Glide™, a PI / PTFE composite, provides a lower coefficient of friction for reduced surface resistance of the tubing. For applications that require enhanced torque, flexibility, strength, pushability, kink resistance, or burst resistance, reinforced polyimide tubing is available. Zeus reinforced polyimide tubing can be produced in full load and half load braid patterns, with various PPI (pick per inch) depending on your specifications. Lower braid densities (low PPI) result in increased pushability, while higher braid densities (high PPI) result in increased flexibility and steerability. Reinforced polyimide tubing is also available in coil configurations with various WPI (wraps per inch) to meet your requirements.

This product is a polyurethane system. After use please close the containers carefully. The product can be subject to color variations due to raw materials, but these color variations have no influence on the quality and the properties of the product. Seal porous mold surfaces first (ebalta mold sealer). For optimum mold releasing we recommend a special release agent (like T1-1), which can be applied easily with a brush or be sprayed. Releasing of the mold 2-3 times, evaporate for about 20 min. after each releasing.

Nylene Very high viscosity extrusion resin having an ASTM relative viscosity of 800 Excellent structural strength, durability, and physical properties Good melt strength and good draw-down properties which promote dimensional control for extrusion of pipe, tubing, film, and sheet Particularly recommended for the extrusion of thick slab, large rod stock, and large complex profiles Optimum processing conditions should permit for a melt temperature of 550 - 575°F at the die.

Polyplastics Group Topas® 6015S-04Product DescriptionTOPAS 6015S-04 is a general purpose injection molding grade. It is a glass-clear amorphous polymer with outstanding moisture barrier, chemical resistance, high purity and a non-reactive surface making it an excellent choice for optics, healthcare and other high-tech products. Lower leachables and extractables of TOPAS COC preserve food and drug stability and quality. It is a non-polar substrate that does not promote adsorption, denaturation, aggregation, or precipitation like glass can. This grade has a high (150°C) heat distortion temperature to withstand 121°C and 134°C steam and dry heat sterilization protocols, as well as gamma and EtO procedures.Selected Applications Drug delivery Prefilled syringes, vials, cartridges Bottles and tubes Surgical instruments IV containers and components Labware Optics Electronics Food packaging Healthcare and food contact Leading Attributes Low leachables & extractables, low water transmission Non-ionic, does not promote adsorption like glass Minimally reactive Chemically resistant to alcohol, acetone, and acrylates Transparent, withstands EtO/gamma/steam sterilization Temperature resistance, clarity and purity Clarity, low birefringence, low moisture sensitivity Low dielectric constant, thermoplastic Not manufactured with BPA, phthalates, or halogens Broad regulatory compliance Related Grades for Injection Molding, Healthcare, Optics and Diagnostics TOPAS 6013M-07 - broader processing window, best for blow molding (IBM/ISBM) TOPAS 6017S-04 - our most heat distortion resistant IM grade (HDT=170°C) Topas® 6015S-04Topas® 6015S-04 is a Cyclic Olefin Copolymer (COC) product. It is available in Asia Pacific.Characteristics include: Flame Rated Copolymer

Elastocon® 8068N is a colorable thermoplastic elastomer formulated for applications that require rubber-like properties and a good surface finish. Elastocon® 8068N is FDA compliant and well suited for consumer goods and industrial applications requiring U.V. stability. Elastocon® 8068N can be overmolded to polypropylene.Elastocon® 8068N is supplied as ready to use pellets in 50 lb. bag and 1000 lb. box quantities.

Elastocon® STK60 thermoplastic elastomer has been developed for applications that require ultra soft rubber-like properties and a good surface finish. Elastocon® STK60 is FDA compliant and well suited for consumer goods and industrial applications requiring non-slip/soft touch ergonomics, sound and vibration dampening, improved impact resistance, and U.V. stability. Elastocon® STK60 can be overmolded to polycarbonate, ABS, PC/ABS, Acrylic, PS, and various grades of polyamide/nylon.Elastocon® STK60 is supplied as ready to use pellets in 50 lb. bag and 1000 lb. bulk quantities.

EPOXOL® 9 - 5 is a bio-based high oxirane epoxidized linseed oil (ELO). Our unique manufacturing process produces an exceptional ELO.

This product is a polyurethane system. After use please close the containers carefully. The product can be subject to color variations due to raw materials, but these color variations have no influence on the quality and the properties of the product. Seal porous mold surfaces first (ebalta mold sealer). For optimum mold releasing we recommend a special release agent (like T1-1), which can be applied easily with a brush or be sprayed. Releasing of the mold 2-3 times, evaporate for about 20 min. after each releasing.

Vetronite® FR-5 HF CTI 600M T is composed of epoxy resin and glass fabric reinforement.

Fainplast Compounds Fainplast™ PVC MPH 69 is a Flexible Polyvinyl Chloride product. It can be processed by extrusion and is available in Africa & Middle East, Asia Pacific, Europe, Latin America, or North America. Applications of Fainplast PVC MPH 69 include medical/healthcare and hose/tubing.

Fainplast Compounds Fainplast™ PVC MPH 75/T is a Flexible Polyvinyl Chloride product. It can be processed by extrusion and is available in Africa & Middle East, Asia Pacific, Europe, Latin America, or North America. Applications of Fainplast PVC MPH 75/T include hose/tubing and medical/healthcare.

Black 6060 is an economy recycled PE based masterbatch containing high opacity carbon black. This product is designed for injection molding items, extruded tubings and sheets for general purpose.

Mediaplast PS-1 is a synthetic plasticizer based on polyalkylbenzene, which is mainly recommended for the use in elastomers with low to medium polarity, e. g. NR, IIR, BR, SBR, EP(D)M, but also CR, CM/CSM, EVA and PNR.

Trelleborg Industries UK Nylon which are nylons are a family of synthetic polymers known as polyamides. They can be used to make mechanical parts such as gears and screws, and can also be extruded. Nylons are lightweight and resistant to corrosion and abrasion. FDA and USP Class VI grades are available. Medical tubing applications include suction, drainage, feeding tubes, dialysis, peristaltic pumps and other surgical procedures.

Miracll Chemicals E 190 is a polyester-based thermoplastic polyurethane used for wide variety of applications.

Goodyear Rubber Company of So. California Silicone rubber is an elastomer different from other rubbers in that it has an inorganic backbone made of silicon and oxygen atoms. Organic rubbers have a carbon-carbon chain atomic structure. The outstanding physical property of silicone is its’ retention of flexibility and tensile strength at relatively high and low temperatures, from -150 F to 600 F. Silicones are very flexible due to large bond angles and bond lengths compared to basic organic polymers. Silicone rubber is a material of choice where retention of shape and mechanical strength are desired under heavy thermal stress or sub-zero temperatures. Silicone rubber is highly inert and does not react with most chemicals and due to its structural properties, it is widely used in aircraft engine parts, door and window sealing parts, healthcare and medical applications including implants.

Sylvin Technologies Sylvin™ 5132-75UV Black is a vinyl compound formulated for wire insulating applications such as speaker wire, booster cable, and extruded tubing. This compound contains an ultra violet stabilizer.

Silopren™ LSR 4030 is a two-component liquid silicone rubber for injection molding processes. Silopren™ LSR 4030 can be used to produce medical technical articles with high transparency and excellent rubber like properties.Key Features and BenefitsVulcanizates consisting of Silopren™ LSR 4030 are distinguished by the following properties: high stability to ozone and ultraviolet light neutral odor and taste sterilisable with ethylen oxide, steam and gamma radiation good transparency high thermal stability high recovery after puncture easy pigmentable with the LSR Color Pastes Potential ApplicationsBecause of the outstanding properties Silopren™ LSR 4030 is particularly suitable for the following elastomeric articles: sealing elements, O-rings, diaphragms, bellows, catheters, baby teats, respiratory devices, vibration dampers, mats, parts for medical technical equipments.

Manifattura Cattaneo PVDF is a Non-toxic semi-crystalline thermoplastic with high chemical resistance. Suitable for contact with food.

Toraycon® 1200MF by Toray is comprised of Polybutylene Terephthalate. It is commonly used

Fainplast Compounds Fainplast™ PVC MPH 75/D is a Flexible Polyvinyl Chloride product. It can be processed by extrusion and is available in Africa & Middle East, Asia Pacific, Europe, Latin America, or North America. Applications of Fainplast PVC MPH 75/D include hose/tubing and medical/healthcare.

Trelleborg Industries UK PEEK is a good choice for applications where fluid compatibility is a concern. It is virtually inert and has good mechanical properties, providing low friction and wear. High strength, toughness and biocompatibility make PEEK ideal for many medical device applications.