Products results

Trecora Chemical CWP130X is a polyethylene wax. Imparts a non-stick character to a coating that decreases the tendency for blocking. Provides anti-block, release and gloss control properties. Can aid in the resistance properties of a coating. Salt spray resistance of an exterior coating that will be exposed to severe weathering can be improved by adding a barrier enhancing wax. Unwanted transfer or adhesion of coating to a contacted surface is thus prevented. Can be used to control gloss to achieve a desired matt effect. CWP130X by Trecora Chemicals is used in powder coatings, can coatings, coil coatings and wood/furniture coatings.

MoldWiz® INT-55PV - A process aid additive with anti-static properties which is incorporated directly into the resin. Improves resin flow, improves dispersion of other resin additives (reinforcements, fillers, and pigments), shortens cycle times, reduces temperatures and pressures of molding machines, and reduces or eliminates weld/knit lines. Eliminates the need for an external mold release agent. An effective addition of process aid additive will not have any adverse effect on physical properties or secondary operations such as decorating, printing, bonding, or plating

MoldWiz® INT-3944 is a processing aid additive with anti-static properties which is incorporated directly into the resin eliminating the need for an external mold release agent. FRP molds require a surface coating to seal the porosity and maintain the gloss. An effective addition of process aid additive will not have any adverse effect on the cured resin. Thermoplastic molded parts will be stress-free and thermoset parts may have improved Barcol hardness. The complex polymeric nature of the process aid additive will not interfere with secondary operations such as decorating, silk screen printing, painting, bonding or plating.

SAK- DCS by Sun Ace is a dispersible calcium stearate. Acts as an acid scavenger, lubricant, mold release agent, extender and water repellent agent. SAK- DCS contains vegetable-based fatty acid and metal. Exhibits excellent lubricating and dispersing properties and stabilizing, hydrophobic and foam inhibiting effects. Compatible with thermoplastics. Used in plastics and rubber.

ULTRA-LUBE™ 220 improves filler incorporation and release of most rubber compounds. Due to its low volatility, ULTRA-LUBE“ 220 can be used in heat resistant vulcanisates based on HNBR, ACM and FKM. ULTRA-LUBE™ 220 shows good plasticizing properties, which leads to reduction of injection pressure in molding process and prevents scorch. ULTRA-LUBE™ 220 is highly effective in polar compounds, like NBR to improve flow and release. ULTRA-LUBE™ 220 is especially suitable for peroxide curing system owing to its low peroxide demand.

TR 121 - Oleamide used as a slip agent in polyolefins. Its uniform bloom makes it a valuable flow and release agent in thermoplastics and thermoset elastomers.

Grillo-Werke AG Zinc Oxide Red Seal MH 10 is a chemical element that is indispensable in the production of numerous everyday products. The variety of products calls for a specific choice of the Zinc Oxides used. With our wide range of products we are capable of perfectly meeting the various requirements for specific qualities. Zinc Oxide plays an essential role as activator in the vulcanisation process in the tire and rubber industry. It improves the elasticity of glazes in the ceramic industry..

MoldWiz® INT-2424 - A process aid additive with anti-static properties which is incorporated directly into the resin eliminating the need for an external mold release agent. An effective addition of process aid additive will not have any adverse effect on the cured resin. The complex polymeric nature of the process aid additive will not interfere with secondary operations such as decorating, silk screen printing, painting, bonding or plating.

ABRIL® 1021 is widely applicable as an additive in the compounding and processing of thermoplastics, performing as an outstanding internal and external lubricant. It's a non-toxic product and F&DA approved for many food contact applications. Abril 1021 is supplied in the form of mini prill.

Dispersix® 4 PC-2 is a growing family of hybrid inorganic-organic microspheres, specifically optimized for high consistency rubber silicone cure chemistry. It helps formulators achieve breakthrough gains in productivity for silica-reinforced HCR compounds.

Sinobase Polymers Chemical AC-01 is a slightly yellowish powder. Which is stable at room temperature and is soluble in alkali, insoluble in acid, pyridine, benzene, gasoline and water. There is no toxicity or contamination..

Golden Dragon Chemicals ACR-JX series products are the new generation of acrylate macromolecule copolymer. It was produced by using advanced polymerization and desiccation technical on the bases of our years producing experience. As it has low dust, non-corrosive, excellent fluidity and don’t dissolve in water, it was considered to be an ideal processing modifier of PVC.

ZB 47 - A proprietary zinc compound which promotes processing in filled rubber systems. It offers heat stability (reversion resistance) and improves dynamic properties in natural rubber compounds containing mineral fillers and silane coupling agents. It can improve tack and tack retention of high natural rubber compounds.

Changzhou Juyou New Material Technology JY201-100 has a strong shearing resistance, good transmission of light low surface tension , excellent water repellency and moisture resistant and low volatilitioon.

McLube® 1038 is a non-transferring, semi-permanent coating with cutting edge additives that make it ideal for epoxy molding and epoxy-bound composite manufacturing. Heat or air-cured.

Sunlube MG-12 is in fine powder form and chemically known as 12- Hydroxy Magnesium Stearate.

Yi Mei New Material Technology FT-Wax-F60 is a methylene polymer, which is an alkane polymer synthesized from hydrocarbon syngas or natural gas. It mainly relies on high quality and cheap raw materials of coal chemical industry for iron-based or cobalt-based synthes is, which has obvious advantages over crude oil wax price.

Stoner, Inc. E236 Urethane Mold Release is specially formulated as a release agent and anti-stick lubricant for molded urethanes. A light coating produces best results.

McLube® 799 is a water-based dispersion of finely divided fluoropolymers designed to provide excellent release of mandrel-built epoxy-bound composites. Chemically inert and durable enough to withstand harsh curing conditions.

Endex 1725™ is a 25% concentrate in a polymer carrier. It can be used in a wide range of commodity and engineering plastics, combining quality and efficiency with the benefits of versatility and cost effectiveness.

Mediaplast AT is a very effective process aid to improve flow properties and to reduce the tackiness of rubber compounds regardless of the polymer used. Processing of CR and ACM compounds in par-ticular is significantly improved by adding a small amount of Mediaplast AT. It improves the demolding properties of technical rubber parts. The sticking of uncured compounds to internal mixers, open mills and conveyor belts will be visibly diminished by the use of Mediaplast AT.

ChemPlasa Materials L-1030 is Polarity Amide Wax which used as a functional additive in many industrial applications.

Hangzhou Hi-Tech Fine Chemical RA is a high-temperature white foaming agent for polypropylene, rigid PVC, ABS, nylon, high density polyethylene, polycarbonate and other high-temperature foam products. P-toluenesulfonyl semicarbazide inorganic endothermic foaming agents in different ways and proportions compound can be produced Decomposition temperature range of absorption heat balance white foaming agent to adapt to a variety of soft, hard plastic and rubber and foam performance.

Cel-Span® CFA 200 is a 50% active Binary foaming agent specially formulated with activators and self-nucleating agents that contribute to uniform cell formation and smooth surfaces. CelSpan® CFA 200 concentrate releases mostly N2 and CO2 gasses upon decomposition. This product is safe when used under the conditions of intended use. Upon complete decomposition (activation) of the C.F.A., the extruded and injected parts will become white, similar in color to endothermic chemical foaming agents. Cel-Span® CFA 200 is recommended for extrusion, injection, and structural molding of any kind of thermoplastics, except polycarbonate and thermoplastic polyesters.

Sunlube CA-10 is in fine powder form and it is chemically known as Calcium Stearate.

Trecora Chemical CWP500E is a polyethylene wax. Imparts a non-stick character to a coating that decreases the tendency for blocking. Can aid in the resistance properties of a coating. Salt spray resistance of an exterior coating that will be exposed to severe weathering can be improved by adding a barrier enhancing wax. Unwanted transfer or adhesion of coating to a contacted surface is thus prevented. Provides anti-block, release and gloss control properties. Can be used to control gloss to achieve a desired matt effect. CWP500E by Trecora Chemicals is used in powder coatings, can coatings, coil coatings and wood/furniture coatings.

Ficel® Extend 49SBH73 is used as Rigid PVC.

BNX 565 (991-84-4)is a high molecular weight, non-staining, multifunctional antioxidant developed for the stabilization of unsaturated elastomers (BR, IR, SBR, SIS, SBS, etc.), hot melt adhesives, and rosin ester tackifier resins.

ABRIL® 1031 is widely applicable as an additive in the compounding and processing of thermoplastics, performing as an outstanding internal and external lubricant. It's a non-toxic product and F&DA approved for many food contact applications. Abril 1031 is supplied in the form of fine beads.

Elastomag® 100 magnesium oxide is a high activity grade of magnesium oxide with lower activity thanstandard Elastomag 170. Elastomag 100 is made from magnesium-rich brine and dolomitic lime at our Manistee, Michigan plant.

McLube® 1700L is a PTFE dispersion with binding additives offering semi-permanent, non-transferring release characteristics. Ideal for injection molding. Silicone-free. Also, an excellent dry lubricant.

SA 0811 - For use with recycled rigid PVC where additional stabilization and lubrication is needed to reduce yellowing, burning and sticking in extrusion, injection molding and calendering.

McLube® 787 is a water-based, heat-cured emulsion designed to prevent prerelease of large rotationally molded parts and provide multiple releases per application. Delivered ready-to-use.

Endex 4233™ is a high efficiency pelletized concentrate, in a thermoplastic polymer carrier. It is designed for use in both commodity and engineering plastics, and may be dried with the polymer if needed. It combines its endothermic properties, quality and efficiency, with versatility and cost-effectiveness.

V-DSP - Internal lubricant for extruded profiles and molding - exceptional clarity.