Healthcare & Pharma

8,656 products found in Healthcare & Pharma
Applications
Medical
Drug Delivery & Care Solutions
Pharmaceutical Manufacturing
Other Healthcare & Pharma Applications
With TDS
Hide Blends
With SDS
Shin-etsu Aqoat® As-mmp product card banner

Shin-Etsu Pharma, Nutra and Food

Shin-Etsu AQOAT® AS-MMP

Function: Coating System, Solubilizer

Labeling Claims: TSE-free, Allergen-free, Non-GMO, Kosher, BSE-free, Solvent-free

Certifications & Compliance: Japan Pharmacopeia (JP), GMP, The Food Allergen Labeling and Consumer Protection Act of 2004 (FALCPA), DMF Type IV, National Formulary (NF)

Dosage Form: Capsules, Tablets, Pellets

Amorphous solid dispersion is a technology for solubility enhancement of drugs.Shin-Etsu AQOAT® AS-MMP is used as solubility enhancement of poorly soluble APIs.

Drakeol® 9 Lt Min Oil Nf product card banner

Calumet

Drakeol® 9 LT MIN OIL NF

Function: Lubricant, Binder, Release Agent, Ointment Base, Anti-Sticking Agent, Carrier, Laxative

Physical Form: Liquid

Labeling Claims: Halal, Kosher, GMO-free, BSE-free, Vegan

Chemical Name: White Mineral Oil

Drakeol® 9 LT MIN OIL NF is a white oils are among the most versatile products in the world, making them a standard preference across diverse industries. Due to their extreme purity, white oils provide an effective use as a base, emollient, lubricant, release agent, binder, or excipient in multiple product applications.

Cekol® 30000 P Cellulose Gum product card banner

CP Kelco

CEKOL® 30000 P Cellulose Gum

Chemical Name: Cellulose, carboxymethyl ether, sodium salt

Function: Thickener, Viscosity Modifier, Dispersant, Stabilizer

Labeling Claims: Halal, Kosher

Certifications & Compliance: European Pharmacopeia (Ph. Eur.), FDA IID, United States Pharmacopeia (USP), Japan Pharmacopeia (JP)

CAS Number: 9004-32-4

CEKOL® 30000 P is a highly purified Sodium Carboxymethylcellulose. It is a tasteless, odourless, thickener, stabilizer or dispersant.

Meritol® 160 Pharma product card banner

Tereos Starch & Sweeteners

Meritol® 160 Pharma

Chemical Name: D-Glucitol

CAS Number: 50-70-4

Function: Bulking Agent, Plasticizer, Sweetener, Suspension Aid, Cooling Agent, Coating System, Stabilizer

Manufacturing Technology: Tablet Coating

Certifications & Compliance: European Pharmacopeia (Ph. Eur.), United States Pharmacopeia (USP)

Dosage Form: Syrups

It is a clear, colourless, syrupy liquid, miscible with water. It is manufactured by catalytic hydrogenation of glucose syrup derived from edible starch hydrolysis

Stelliesters Dbs product card banner

Stearinerie Dubois

STELLIESTERS DBS

Chemical Name: Dibutyl Sebacate

Function: Plasticizer, Surfactant, Co-Emulsifier, Emollient, Solubilizer, Coating System

Certifications & Compliance: European Pharmacopeia (Ph. Eur.), United States Pharmacopeia (USP)

Dosage Form: Creams, Gels, Soft Gels, Capsules, Ointments

STELLIESTERS DBS is Diester of sebacic acid and butyl alcohol with excellent spreading properties. EP and USP compliance. Suitable for dermal applications.

Softigen® 767 product card banner

IOI Oleo GmbH

SOFTIGEN® 767

Function: Solubilizer, Film Former, Wetting Agent

Certifications & Compliance: GMP, Kosher, Halal, CosIng Listed, European Pharmacopeia (Ph. Eur.), United States Pharmacopeia (USP)

Labeling Claims: Clean at Sephora, Halal, Kosher

INCI Name: PEG-6 Caprylic/Capric Glycerides

Suitable for use in the preparation of SEDDS. Solubilizer for drugs, wetting and refatting agent. Soluble in water and hydrophilic oils (e.g. MCT oil).

Imwitor® 960 K product card banner

IOI Oleo GmbH

IMWITOR® 960 K

Chemical Name: Glycerol Monostearate

CAS Number: 31566-31-1

Function: Emulsifier

Labeling Claims: Kosher, Halal

Certifications & Compliance: GMP, British Pharmacopeia (BP)

IMWITOR® 960 K – self-emulsifying glyceryl monostearate emulsions with IMWITOR® 960 K are compatible with a wide range of APIs and therefore an excellent basis for stable

Regar Chemicals Dl-mandelic Acid product card banner

Regar Chemicals

Regar Chemicals DL-Mandelic acid

Chemical Name: DL-Mandelic Acid

CAS Number: 90-64-2

Purity (Assay): 99.0 - 99.0 %

DL-Mandelic acid is mainly used for pharmaceutical intermediate, herbicides dye intermediate, analytic reagent.

Liveo™ Mdx4-4210 product card banner

DuPont

Liveo™ MDX4-4210

Polymer Name: Silicone Elastomer

Processing Methods: Resin Transfer Molding, Compression Molding

End Uses: Prototyping, Medical/Healthcare Applications, Medical Devices, Mold Making

Features: Non Blooming, Translucent, Low Warpage, Consistent High Quality, Pourable, Pigmentable, Low Emissions, Good Thick Section Cure, Excellent Dielectric Properties

Liveo™ MDX4-4210 BioMedical Grade Elastomer is a pourable two- component product which, when combined, cures to a translucent silicone rubber over several hours at room temperatures, but may be more rapidly cured by application of heat.

Zytel® Lcpa 158 Nc010 product card banner

DuPont

Zytel® LCPA 158 NC010

Polymer Name: Polyamide 612 (PA 612)

Processing Methods: Injection Molding, Extrusion, Coating

Zytel® 158 NC010 is an intermediate viscosity polyamide 612 resin.

Hytrel® G4774 product card banner

DuPont

Hytrel® G4774

Polymer Name: Thermoplastic Copolyester Elastomer (TPC-ET)

Processing Methods: Film Extrusion, Thermoforming, Casting, Injection Molding, Extrusion, Sheet, Plaques & Profiles Extrusion

End Uses: Wire & Cable Applications, Jacketing, Hoses, General Purpose, Cosmetic Packaging, Appliances, Pipes, Automotive Applications, Cable Jacketing, Film, Sporting Goods, Thermoforming Applications, Tubing, Electrical/Electronic Applications

Density: 1190.0 - 1190.0 kg/m³

Strain at Break: 200.0 - 200.0 %

Flexural Modulus: 111.0 - 111.0 MPa

Hytrel® G4774 is a medium modulus grade with nominal hardness of 47D. It contains discoloring stabilizer. It can be processed by many conventional thermoplastic processing techniques like injection molding and extrusion. Typical applications: Hose and tubing, wire and cable jackets, film and sheeting, profiles and molded products. Not suited for light-colored finished products.

Alfoterra 145-8s 90 product card banner

Sasol

ALFOTERRA 145-8S 90

Function: Surfactant

End Uses: Industrial Applications, Oil/Gas Applications, Chemical EOR (Enhanced Oil Recovery), Wellbore Cleaning, Chemical Process, Oil & Gas Applications, Drilling Applications, Metalworking Fluids, Sludge and Drill Cleaning

Chemical Family: Alkyl Ether Sulfates, Sulfates

Compatible Substrates & Surfaces: Paper

ALFOTERRA 145-8S 90 is the sodium salt of ISALCHEM 145 fatty alcohol propoxy-sulphate with about 85% active matter. These surfactants are sodium salts of alcohol propoxy sulfates supplied as a ca 90% anionic active solution. For documents specific to a region, please contact Sasol using the 'Request Document' button.

Liveo™ Biomedical Grade Lsr Q7-4840 product card banner

DuPont

Liveo™ BioMedical Grade LSR Q7-4840

Polymer Name: Silicone Elastomer, Liquid Silicone Rubber (LSR)

Processing Methods: Extrusion, Injection Molding, Liquid Injection Molding

End Uses: Medical/Healthcare Applications, Medical Devices, Body Implants

Features: Heat Stabilized, Autoclaved, Good Colorability, High Gas Permeability, Platinum Catalyzed

Liveo™ Bio Medical Grade Liquid Silicone Rubbers (7-6830, 7-6840, Q7-4840, Q7-4850, 7-4860, 7-4870 and 7-6860) are a series of two-part platinum-catalyzed silicone elastomers specifically designed for liquid injection molding or supported extrusion.Liveo™ BioMedical Grade Liquid Silicone Rubbers (7-6830, 7-6840, Q7-4840, Q7-4850, 7-4860, 7-4870 and 7-6860) are heat-cured elastomer raw materials for use by customers fabricating medical devices, including those intended for implantation in humans for less than 30 days.

Tpsiv® 4000-75a Sr product card banner

DuPont

TPSiV® 4000-75A SR

Polymer Name: Thermoplastic Vulcanizate (TPV)

Processing Methods: Injection Molding, Extrusion

Density: 1100.0 - 1100.0 kg/m³

Tear Strength: 64.0 - 64.0 kN/m

Compression Set (70 °C): 70.0 - 70.0 %

TPSiV® 4000-75A SR by DuPont is comprised of Thermoplastic Vulcanizate. It is commonly used It is available in Pellets form.

Liveo™ 7-4107 Silicone Elastomer Membrane product card banner

DuPont

Liveo™ 7-4107 Silicone Elastomer Membrane

Chemical Family: Silicones

Features: Flexible, Matte Finish, Improved Flexibility, Soft

Liveo™ 7-4107 Silicone Elastomer Membrane is a thin film of 100% cured silicone rubber. It is supplied on a rigid polycarbonate carrier film, which can be easily peeled off after processing.

Captex® 355 Ep/nf/jpe product card banner

Abitec Corporation

Captex® 355 EP/NF/JPE

Function: Carrier, Bioavailability Enhancer, Emollient, Solubilizer, Lubricant, Viscosity Modifier

Labeling Claims: BSE-free, CMR Substances-free, Allergen-free, Kosher, Non-GMO, Vegan, Aflatoxin-free, TSE-free, Mycotoxins-free, Naturally Derived, PCB-free

Certifications & Compliance: The Food Allergen Labeling and Consumer Protection Act of 2004 (FALCPA), Kosher, BRC Certified, ISO 14001, European Pharmacopeia (Ph. Eur.), GFSI Certified, United States Pharmacopeia (USP), Generally Recognized As Safe (GRAS), Hazard Analysis Critical Control Point (HACCP), Japan Pharmacopeia (JP), National Formulary (NF), FDA Approved, GMP, Vegan, ISO 45001, ISO 9001

Dosage Form: Tablets, Lotions, Capsules, Ointments, Creams

Captex® 355 EP/NF/JPE is manufactured by the esterification of glycerin and fatty acids, mainly caprylic (≈55%) and capric. It contains not less than 95% of saturated fatty acids with 8 and 10 carbon atoms. It is prepared from raw materials of vegetable sources.

Biodac 2-32 product card banner

Sasol

BIODAC 2-32

Function: Dispersant & Wetting Agent, Wetting Agent, Binder & Resin, Rinse Aid, Surfactant (Nonionic), Surfactant

Chemical Family: Ethers

End Uses: Hard Surface Cleaners, Automatic Dishwash, Metalworking Fluids, Detergents, Industrial Cleaners, Household Cleaners

BIODAC 2-32 is a fatty alcohol poly-glycol ether, based on LIAL 111, ethylene oxide and propylene oxide. For documents specific to a region, please contact Sasol using the 'Request Document' button.

Liveo™ Pharma Advanced Pump Tubing product card banner

DuPont

Liveo™ Pharma Advanced Pump Tubing

Polymer Name: Silicone Elastomer

Physical Form: Tube

Features: Contamination Protection, Superior Resiliency, Hydrophobic, Excellent Flexibility, Durable, Tear Resistance, Easily Sterilized, Excellent Filling Accuracy, Consistent Performance, Complete Traceability, Low Extractables, Rigorous Change Control

End Uses: Tubing, Medical/Healthcare Applications, Medical Devices

Tensile Strength: 8.9 - 8.9 MPa

Liveo™ Pharma Advanced Pump Tubing is a Translucent pharmaceutical grade silicone tubing designed for pumping of ultrapure liquids in pharmaceutical and biotechnological manufacturing processes. Made from biomedical grade tear resistant platinum-cured elastomer. Liveo™ Pharma Advanced Pump Tubing used in peristaltic pumps where durability is required. DuPont Advanced Pump Tubing offers up to four times the pump life of standard platinum cure silicone tubing.

Hytrel® 4068 product card banner

DuPont

Hytrel® 4068

Polymer Name: Thermoplastic Copolyester Elastomer (TPC-ET)

Processing Methods: Film Extrusion, Thermoforming, Casting, Injection Molding, Extrusion, Sheet, Plaques & Profiles Extrusion

End Uses: Hoses, Cosmetic Packaging, Appliances, Pipes, Automotive Applications, Corrugated Pipe, Sporting Goods, Thermoforming Applications, Tubing, Office Automation Equipment, Cast Films, Wire & Cable Applications

Density: 1110.0 - 1110.0 kg/m³

Strain at Break: 300.0 - 300.0 %

Flexural Modulus: 45.0 - 45.0 MPa

Hytrel® 4068 is a low modulus Hytrel® grade with nominal durometer hardness of 40D. It contains non-discoloring stabilizer. It can be processed by many conventional thermoplastic processing techniques like injection molding and extrusion. Typical applications:Molded products, hose and tubing, wire and cable jackets, film and sheeting, belting and seals.

Hytrel® 7246hs Nc010 product card banner

DuPont

Hytrel® 7246HS NC010

Polymer Name: Thermoplastic Copolyester Elastomer (TPC-ET)

Processing Methods: Film Extrusion, Thermoforming, Casting, Injection Molding, Extrusion, Sheet, Plaques & Profiles Extrusion

End Uses: Hoses, Cosmetic Packaging, Pipes, Automotive Applications, Corrugated Pipe, Monofilaments, Film, Thermoforming Applications, Tubing, Cast Films, Wire & Cable Applications

Density: 1250.0 - 1250.0 kg/m³

Strain at Break: 300.0 - 300.0 %

Flexural Modulus: 500.0 - 500.0 MPa

Hytrel® 7246HS NC010 is a high modulus, heat stabilized grade with nominal hardness of 72D.Typical applications:Tubing, wire and cable jackets, gears and sprockets, oil field parts.

Andisil® Vs 100 product card banner

AB Specialty Silicones

Andisil® VS 100

Polymer Name: Siloxane Polymer

End Uses: Encapsulant, Mold Making, Dental Applications

Features: Service Life Extension, Fast Curing

Andisil® Vinyl Polymers are vinyl-terminated dimethylpolysiloxanes that are available in a variety of viscosities. They can be used as base polymers or as blend polymers in order to create the desired hardness. These polymers can be cured with silicon-hydride crosslinkers and a platinum catalyst.

Epo-tek® H44 product card banner

Epoxy Technology Inc.

EPO-TEK® H44

Polymer Name: Epoxy Resins & Compounds

End Uses: Aerospace Applications, Electrical Components, Semiconductor Applications, Medical/Healthcare Applications, Printed Circuit Boards, Electrical/Electronic Applications, Semiconductor Molding Compounds

Volume Resistivity: 0.000005 - 0.000005 Ohm-m

EPO-TEK® H44 is a single component, gold-filled, electrically conductive epoxy adhesive designed for hybrid microelectronic packaging.

Fluoraz™ 890 product card banner

Greene Tweed

Fluoraz™ 890

Polymer Name: Polytetrafluoroethylene (PTFE)

Fluoraz 890 is formulated for use in sanitary gaskets where both USP and FDA compliance is required, making it an excellent compound for both pharmaceutical and other hygienic fluid handling applications such as seals for brewery applications. Fluoraz 890 metal and TOC extractable are an orde of magnitude lower than premium competitive FKM formulations, ensuring little or no contamination into the process stream. Fluoraz 890 also meets the extrative requirements of both 21 CFR 177.2600 (e), (f) and 21 CFR 177.240 (d) extraction testing for perfluoroelastomers. Fluoraz 890 sanitary gaskets by Greene, Tweed are designed for minimal intrusion.Fluoraz 784 is also available in O-rings and custom shapes where a low durometer hardness is desired.

Nomex® Honeycomb Core—aerospace Grade product card banner

Toray

Nomex® Honeycomb Core—Aerospace Grade

Function: Core Material

Core Type: Nomex Honeycomb

Chemical Family: Aramid (Kevlar)

ANA aerospace grade Nomex® honeycomb core is manufactured from Nomex® paper sheets and is coated and bonded together with a phenolic resin. Designed to offer users and designers high strength-to-weight properties at relatively low cost, Nomex® honeycomb is particularly suitable as a core material for production of sandwich structures requiring significant FST performance and using high performance fiber reinforced composites as the facing material.

Amc® 8592 product card banner

Quantum Composites

AMC® 8592

Function: Molding Compound

Reinforcement Material: Carbon Fibers

Processing Methods: Compression Molding

AMC® 8592 is a chopped carbon fiber reinforced ESC® molding compound. It is easily moldable and provides parts that are high strength, fatigue resistant, with high heat resistance and a low density. The carbon fiber is standard modulus PAN based 12K tow.

Silopren™ Lsr 4040 product card banner

Momentive Performance Materials

Silopren™ LSR 4040

Polymer Name: Liquid Silicone Rubber (LSR)

Processing Methods: Injection Molding

End Uses: Connectors, Medical/Healthcare Applications

Features: Low Odor, Steam Sterilizable, Biocompatible, Good Colorability, High Clarity, Low Taste Transfer, Good Thermal Stability, Ozone Resistant, UV Resistant, Radiation Sterilizable, Ethylene Oxide Sterilizable

Tear Strength: 25.0 - 25.0 kN/m

Silopren™ LSR 4040 is a two-component liquid silicone rubber for injection moulding processes. Silopren™ LSR 4040 can be used to produce medical technical articles with high transparency and excellent rubber elastic properties.Key Features and BenefitsVulcanisates consisting of Silopren™ LSR 4040 are distinguished by the following properties: Excellent biocompatibility High stability to ozone and ultraviolet light Neutral odor and taste Sterilisable with ethylene oxide, steam and gamma radiation Good transparency High thermal stability High recovery after puncture Easy pigmentable with the LSR Colour Pastes Potential ApplicationsBecause of the outstanding properties Silopren™ LSR 4040 is particularly suitable for the following elastomeric articles: sealing elements, diaphragms, ear plugs, bellows, baby teats, respiratory devices, air vent flaps, tube connectors, catheters, parts for medical technical equipment, mats s.o.

Pt Asahimas Chemical (Asc) Caustic Soda (Naoh) product card banner

PT Asahimas Chemical (ASC)

PT Asahimas Chemical (ASC) Caustic Soda (NaOH)

Applications: Chemical & Industrial Manufacturing, Oil, Gas & Mining, Paper & Pulp

Product Families: Technical Salts & Inorganics, Alkalis & Bases

Chemical Family: Sodium Salts, Alkalis, Bases

Caustic soda is an essential raw material and process chemical in many industrial operations. ASC delivers Caustic Soda in 48% solution (Liquid Caustic Soda) and in solid form (Flake Caustic Soda, 98%).

Epo-tek® H77 product card banner

Epoxy Technology Inc.

EPO-TEK® H77

Polymer Name: Epoxy Resins & Compounds

Processing Methods: Potting, Casting

End Uses: Electrical Components, Semiconductor Applications, Medical/Healthcare Applications, Automotive Under The Hood, Printed Circuit Boards, Aircraft Applications, Electrical/Electronic Applications, Semiconductor Molding Compounds

Volume Resistivity: 100000000000.0 - 100000000000.0 Ohm-m

EPO-TEK® H77 is a two component, thermally conductive, electrically insulating epoxy system designed for lid-sealing of hybrids found in hermetic packaging of micro-electronics. Lids can be ceramic, glass, aluminum or kovar. Package types can be plastic, metal cases or ceramic.

Kuraray Poval™ 18-88 product card banner

Kuraray

Kuraray Poval™ 18-88

Polymer Name: Polyvinyl Alcohol (PVOH)

Chemical Family: Polyvinyl Alcohols & Esters

Features: Good Bonding Strength, Good Pigment Binding Capacity, Good Adhesion, Good Cohesion, High Molecular Weight, Good Pigment Wettability

KURARAY POVAL™ 18-88 by Kuraray is a partially saponified polyvinyl alcohol (PVOH) grade. It exhibits good cohesion and adhesion to fibers, fillers and pigments. It is designed for modification of emulsion adhesives and remoistenable adhesives in the paper processing industry. It offers good bonding strength and pigment binding capacity. Aqueous solution of KURARAY POVAL™ 18-88 can be added to polymer emulsion which is already stabilized with polyvinyl alcohol to extend the open time, increase setting speed and influence the rheology.

Starex Mr-0130 product card banner

LOTTE Advanced Materials

Starex MR-0130

Polymer Name: Acrylonitrile Butadiene Styrene (ABS)

Melt Flow Index: 40.0 - 40.0 g/10 min

Starex MR-0130 by LOTTE Advanced Materials is comprised of Acrylonitrile Butadiene Styrene. It is commonly used

Kuraray Poval™ 40-88 product card banner

Kuraray

Kuraray Poval™ 40-88

Function: Binder & Resin, Resin

Polymer Name: Polyvinyl Alcohol (PVOH)

Chemical Family: Polyvinyl Alcohols & Esters

KURARAY POVAL™ 40-88 by Kuraray is a partially saponified polyvinyl alcohol (PVOH) grade. It possesses good cohesion and adhesion to fibers, fillers and pigments. It is suitable for modification of emulsion adhesives and remoistenable adhesives in the paper processing industry. It provides good bonding strength and pigment binding capacity. Aqueous solution of KURARAY POVAL™ 40-88 can be added to polymer emulsion which is already stabilized with polyvinyl alcohol to extend the open time, increase setting speed and influence the rheology. It is recommended for use in postage stamps and labels. Complies with EU Directive 67/548/EC regulation.

Nusil™ Med-4815 product card banner

NuSil Technology

NuSil™ MED-4815

Polymer Name: Liquid Silicone Rubber (LSR)

Processing Methods: Liquid Injection Molding

End Uses: Medical/Healthcare Applications, Valve Parts, Valves

Features: Good Colorability, Fast Curing, High Strength

NuSil™ MED-4815 is a NuSil Technology's unrestricted materials may be considered for long-term implant applications (greater than 29 days).Liquid silicone rubbers, or LSRs, are elastomer systems reinforced with silica. They contain functional polymers of lower average molecular weight and viscosity when compared to high consistency rubbers (HCRs). They are typically supplied as two-component systems and formulated in a 1:1 mix ratio. Because their consistency is akin to petroleum jelly, they are often pumped with injection molding equipment to form molded components such as o-rings, gaskets, valves, seals, and other precision molded parts.LSRs are designed for liquid injection molding (LIM) processes which may utilize single or multi-cavity molds, or for overmolding processes. Originally designed for automated systems, they are developed with high volume applications in mind and benefit from their high strength.Comments: INJECTION MOLDING ELASTOMER.

Copro Sp 591 product card banner

H.B. Fuller

COPRO SP 591

Chemical Family: Acrylics & Acrylates

Features: Low Viscosity, Easy Handling

An alkali swellable acrylic emulsion polymer

Epo-tek® Og198-54 product card banner

Epoxy Technology Inc.

EPO-TEK® OG198-54

Polymer Name: Epoxy Resins & Compounds

End Uses: Electrical/Electronic Applications, LCD Applications, Medical/Healthcare Applications

EPO-TEK® OG198-54 is a single component, low viscosity, electrically and thermally insulating UV cure, medical grade epoxy.

Multilon® Mk-1000a product card banner

Teijin Limited

Multilon® MK-1000A

Polymer Name: PC/ABS Alloy

Processing Methods: Injection Molding

Density: 1120.0 - 1120.0 kg/m³

Flexural Modulus: 2100.0 - 2100.0 MPa

PC/ABS polymer alloy, Automotive series

Trilene Pp® Ri10hc product card banner

Chandra Asri Petrochemical

Trilene PP® RI10HC

Polymer Name: Polypropylene Random Copolymer (RCP)

Processing Methods: Injection Molding

Melt Flow Index: 10.0 - 10.0 g/10 min

RI10HC is a polypropylene ethylene random copolymer with high clarity, for housewares, containers, lids,medical syringes, and general purpose injection molding applications where maximum clarity is desired.This grade uses Unipol® polypropylene technology from Union Carbide Corporation with the latest generation of catalyst.