Products results

Ertalon® LFX PA6 / Nylatron® LFX Polyamide PA6 internally lubricated shapes are specially formulated to withstand the demands of unlubricated, highly loaded, and slowly moving parts applications. This high-performance material offers a unique combination of mechanical properties, including high strength, stiffness, hardness, and toughness, as well as excellent sliding properties, high mechanical damping capabilities, and exceptional electrical insulation properties.Features:Internally lubricatedHigh mechanical strength, stiffness, hardness, and toughnessExcellent sliding propertiesHigh mechanical damping capabilitiesExceptional electrical insulating propertiesBenefits:Can withstand the demands of unlubricated, highly loaded, and slowly moving parts applicationsOffers a unique combination of mechanical propertiesProvides excellent performance in extreme conditionsMinimizes the need for external lubricationApplications:Pharmaceutical, biotechnology, medical, and processing marketsIdeal for use in unlubricated, highly loaded, and slowly moving parts applications such as gears, bearings, and bushingsCan be used in a wide range of industries where high performance, durability, and low maintenance are required.

Acetron® POM-H / Ertacetal® H is a homopolymer acetal grade that offers exceptional mechanical strength, stiffness, and hardness, making it the ideal choice for a wide range of demanding applications. Its superior creep resistance and low thermal expansion rate make it stand out from copolymer acetal grades, making it the go-to material for small diameter, thin-walled bushings, bearings, gears, electrical components, medical and diagnostic equipment, valves, and fluid handling components.Features:Superior mechanical strength, stiffness, and hardnessExceptional creep resistanceLow thermal expansion rateHigh wear resistanceBenefits:Durable and long-lasting performanceEasy installation and removal with minimal distortionHigh resistance to chemical wearHigh impact strength, even at low temperaturesExcellent dimensional stabilityApplications:Small diameter, thin-walled bushings and bearingsGearsElectrical componentsMedical and diagnostic equipmentValvesFluid handling components

Nylatron® LFX Polyamide PA6, a specially formulated internally lubricated material designed for unlubricated, highly loaded, and slowly moving parts applications. This advanced material offers a range of exceptional properties that make it a top choice for various industries, including pharmaceutical, biotechnology, medical, and processing.Features:Internally lubricated for unlubricated, highly loaded, and slowly moving parts applicationsHigh mechanical strength, stiffness, hardness, and toughnessGreat sliding propertiesHigh mechanical damping capabilitiesExceptional electrical insulating propertiesBenefits:Excellent wear resistance and easy machiningLow coefficient of frictionHigher values of PV (pressure / velocity)Good resistance to high energy radiations (Gamma and X Rays)High mechanical damping capacityGood sliding and thermal insulation propertiesApplications:Pharmaceutical, biotechnology, medical and processing industriesIdeal for use in gears, bearings, sprockets, and sheavesSuitable for use in various machinery and equipment

Ertacetal® H / Acetron® H Polyoxymethylene POM-H is a homopolymer acetal grade that offers exceptional mechanical strength, stiffness, hardness, and creep resistance, making it the perfect choice for a wide range of demanding applications.Features:Superior mechanical properties that allow the use of standard fastenersExcellent stability and machining properties that reduce machining costsDurable material that allows for easy installation and removal with minimal distortionHigh chemical resistance for a long service lifetimeHigh impact strength, even at low temperaturesExcellent dimensional stability with low water absorptionBenefits:Reduced machining costs and improved efficiency in manufacturingLong-lasting and durable components that can withstand demanding conditionsEasy installation and removal, even in tight spacesHigh chemical resistance ensures a long service lifetimeHigh impact strength, even at low temperatures, ensures reliable performance in any environmentExcellent dimensional stability ensures consistent and accurate resultsApplications:Small diameter, thin-walled bushings and bearingsGearsElectrical componentsMedical and diagnostic equipmentValvesFluid handling components

SABIC's Specialties Business LNP ELCRIN 610001UXiQ compound is based on Polycarbonate / Polybutylene Terephthalate (PC/PBT) blend, utilizing ELCRIN iQ upcycling technology containing minimum 12% Post-Consumer Recycling (PCR) weight content. Added features of this grade include: Non-Chlorinated, Non-Brominated Flame Retardant, Good Flow, High Impact, Improved Chemical Resistance, UV Resistant.

SABIC's Specialties Business LNP LUBRICOMP DFL36P compound is based on Polycarbonate (PC) resin containing 30% glass fiber 15% PTFE. Added features of this grade include: Exceptional Processing, Wear Resistant.

SABIC's Specialties Business LNP™ LUBRILOY™ D20001 compound is based on Polycarbonate (PC) resin containing proprietary lubricant. Added features of this grade include: Non-Brominated, Non-Chlorinated Flame Retardant, Wear Resistant.

LNP THERMOCOMP AF002XXC compound is based on Acrylonitrile Butadiene Styrene (ABS) resin containing 10% glass fiber.

LNP LUBRICOMP DFP34 compound is based on Polycarbonate (PC) resin containing 20% glass fiber, 15% PTFE/silicone. Added features of this grade include: Wear Resistant.

SABIC's Specialties Business NORYL™ N190X resin is a non-reinforced blend of polyphenylene ether (PPE) + polystyrene (PS). This injection moldable grade contains non-brominated, non-chlorinated flame retardant and carries a UL94 flame rating of 5VA at 3mm and V0 at 1.5mm along with a UL746C Outdoor Suitability rating of F1. NORYL™ N190X resin offers strong electrical performance, low moisture absorption, dimensional stability, and hydrolytical stability. This material is an excellent candidate for indoor and outdoor electrical enclosure, wall plate / switch, connector, and solar / photovoltaic junction box applications.

SABIC's Specialties Business LNP LUBRICOMP DFL32P compound is based on Polycarbonate (PC) resin containing 10% glass fiber, 15% PTFE. Added features of this grade include: Wear Resistant, Exceptional Processing.

LNP LUBRICOMP KL004A compound is based on Acetal (POM) Homopolymer resin containing 20% PTFE. Added features of this grade include: Wear Resistant.

LNP THERMOCOMP AF003 compound is based on Acrylonitrile Butadiene Styrene (ABS) resin containing 15% glass fiber.

LNP LUBRICOMP DFL36G compound is based on Polycarbonate (PC) resin containing 30% mixed glass, 15% PTFE. Added features of this grade include: Wear Resistant.

SABIC's Specialties Business ULTEM™ Resin 2210R is a 20% Glass fiber filled, enhanced flow Polyetherimide (Tg 217°C) with internal mold release. ECO Conforming, UL94 V0 and 5VA listing. This product does not contain PFAS intentionally added during SHPP’s manufacturing process and are not expected to contain unintentional PFAS impurities. Each user is responsible for evaluating the presence of unintentional PFAS impurities.

LNP LUBRICOMP ZL003 compound is based on Polyphenylene Ether / Polystyrene (PPE/PS) blend containing 15% PTFE. Added features of this grade include: Wear Resistant.

SABIC's Specialties Business High heat specialty polycarbonate. For medical devices and pharmaceutical applications. Healthcare management of change, biocompatible (ISO10993 of USP Class VI). EtO, steam, gamma and e-beam sterilizable.

SABIC's Specialties Business NORYL™ SE1GFN2 resin is a 20% glass fiber reinforced blend of polyphenylene ether (PPE) + polystyrene (PS). This injection moldable grade contains non-brominated, non-chlorinated flame retardant and carries a UL94 flame rating of 5VA at 2mm and V1 at 1.5mm along with UL746C Outdoor Suitability rating of F1 and RTI of 110C. NORYL™ SE1GFN2 exhibits high heat resistance, good dielectric strength, dimensional stability, hydrolytic stability, and very low moisture absorption. This material is an excellent candidate for a variety of applications such as solar frames, unattended power supply (UPS) inverter/charger, indoor and outdoor electrical enclosures / housings / connectors, and wall plates / sockets / switches.

SABIC's Specialties Business NORYL™ PX5373 resin is a 20% glass fiber reinforced blend of polyphenylene ether (PPE) + polystyrene (PS). This injection moldable grade contains non-brominated, non-chlorinated flame retardant and carries a UL94 flame rating of 5VA at 2mm and V1 at 1.5mm along with UL746C Outdoor Suitability rating of F1 and RTI of 110C. NORYL™ SE1GFN2 exhibits high heat resistance, good dielectric strength, dimensional stability, hydrolytic stability, and very low moisture absorption. This material is an excellent candidate for a variety of applications such as solar frames, unattended power supply (UPS) inverter/charger, indoor and outdoor electrical enclosures / housings / connectors, and wall plates / sockets / switches.

SABIC's Specialties Business NORYL™ FNH2160 resin is a foamable blend of polyphenylene ether (PPE) + polystyrene (PS) and offers 20% weight reduction at 6.35mm (0.250”) wall. This material contains non-brominated, non-chlorinated flame retardant with a UL94 flame rating of 5VA at 3.9 mm and V1 at 3mm. NORYL™ FNH2160 resin offers fast cycle time, improved processing, and exhibits good dimensional stability and low moisture absorption. The unique combination of properties in this structural foam material allows for designing optimum wall thickness in computer and business machine applications, electrical enclosures/housings, medical equipment, and hospital bed rails and components.

LNP COLORCOMP EX14001 compound is based on unfilled Polyetherimide (PEI) resin. Added features of this grade include: Easy Molding.

SABIC's Specialties Business EXL9330 is an opaque (PC)- siloxane copolymer resin that offers extreme low temperature (-60 C) ductility in combination with excellent processability. This UV stabilized, medium flow resin features UL f1/V-0/5VA rating with non-chlorinated, non-brominated flame retardant agents for wide range of colors. EXL9330 is an excellent candidate for a broad range of applications such as mobile phones, tablets, industrial housings, electric circuit protection, personal safety helmets, electric vehicle supply equipment (EVSE) housings and connectors.

SABIC's Specialties Business LEXAN™ Copolymer HPX4 is a medium flow specialty polycarbonate - improved processability & autoclavability. For medical devices and pharmaceutical applications. Healthcare management of change, biocompatible (ISO10993 or USP Class VI). EtO and steam sterilizable.

SABIC's Specialties Business LNP STAT-KON DD000 compound is based on Polycarbonate (PC) resin containing conductive carbon powder. Added features of this grade include: Electrically Conductive. This product does not contain PFAS intentionally added during SHPP’s manufacturing process and are not expected to contain unintentional PFAS impurities. Each user is responsible for evaluating the presence of unintentional PFAS impurities.

SABIC's Specialties Business ULTEM™ Resin 1010R is an unreinforced amorphous polyetherimide (PEI) resin that may offer a high glass transition temperature (Tg of 217°C), improved flow and it contains internal mold release. Features are excellent mechanical, electrical and dimensional properties up to high temperatures. The material may offer very good chemical resistance for an amorphous material and is inherently flame retardant offering UL94 V0 and 5V ratings and aerospace FAR 25.853 compliance. The material is RoHS compliant. The material is available in opaque colors.This product does not contain PFAS intentionally added during SHPP’s manufacturing process and are not expected to contain unintentional PFAS impurities. Each user is responsible for evaluating the presence of unintentional PFAS impurities.

LNP LUBRICOMP DFL36 compound is based on Polycarbonate (PC) resin containing 30% glass fiber, 15% PTFE. Added features of this grade include: Wear Resistant.

SABIC's Specialties Business LNP LUBRICOMP ABL12 compound is based on Acrylonitrile Butadiene Styrene (ABS) resin containing 10% glass bead and 5% PTFE. Added features of this grade include: Wear Resistant.

SABIC's Specialties Business ULTEM™ Resin 2120 is a high-flow, 10% glass fiber-reinforced polyetherimide resin. This material is RoHS compliant, intrinsically flame retardant without the use of FR modifiers, and offers UL94 V0 at over 0.5 mm. It offers excellent dimensional stability, strength, stiffness, and creep resistance at high temperatures due to its high glass transition temperature of 217°C. This material is opaque and can be custom colored. SABIC offers renewable bio-based solutions certified by ISCC+ for this grade, which are available through differentiated color nomenclature.

30% Glass fiber filled, enhanced flow Polyetherimide (Tg 217C).

SABIC's Specialties Business ULTEM™ Resin 1010UCL is an amorphous, transparent polyetherimide (PEI) thermoplastic offering enhanced flow and a glass transition temperature (Tg) of 217°C. 1010UCL offers the same performance as ULTEM 1010 resin and offers further enhanced cleanliness control for (optical) applications. The natural (uncolored) version of this grade is compliant with RoHS and also with Halogen Free standards as IEC 61249-2-21 and e.g. IPC 4101E. For colored versions, compliance needs to be checked case by case.

SABIC's Specialties Business ULTEM™ Resin 2220 is a high-flow resin with a 20% glass fiber reinforcement made from polyetherimide. This material is RoHS compliant and inherently flame retardant, without the need for any flame retardant additives, and offers a UL94 V0 rating at over 0.5 mm. It provides excellent dimensional stability, strength, stiffness, and creep resistance at high temperatures due to its high glass transition temperature of 217°C. This opaque material can be custom colored, and SABIC offers renewable bio-based solutions certified by ISCC+ for this grade, which can be identified by differentiated color nomenclature.

SABIC's Specialties Business LEXAN LUX7636C Polycarbonate (PC) resin is a non-filled, extrudable grade. This non-chlorinated, non-brominated flame retardant PC has an UL-94 V0 rating at 1.0 mm / 5VA rating at 3.0mm and is UV stabilized(F1 rating) providing additional weathering capability. LEXAN LUX7636C is available in diffusion colors.

SABIC's Specialties Business FXE9330 PC-Siloxane copolymer is a special effects fluorescent with excellent processability and low temperature impact performance. Non-chlorinated, non-brominated flame retardant product in most colors. UV-stabilized. UL rated f1/V-0/5VA.

SABIC's Specialties Business CYCOLOY CX7240U Polycarbonate/Acrylonitrile Butadiene Styrene (PC/ABS) blend is an injection moldable, medium flow, non chlorinated/brominated UV stabilized flame retardant grade. It has a UL94 V0@.75mm, 5VA@3.0mm and 5VB@1.5mm flame rating. This grade has improved chemical resistance compared to standard PC/ABS blends and is a good candidate for thin wall applications.

SABIC's Specialties Business LNP LUBRICOMP UCL36S compound is based on Polyphthalamide (PPA) resin containing 15% PTFE, 30% carbon fiber. Added features of this grade include: Internally Lubricated, Wear Resistant, Heat Stabilized, Electrically Conductive.

SABIC's Specialties Business VALOX™ FR Resin ENH4550 is a 25% glass-reinforced, non-chlorinated/brominated, flame-retardant polybutylene terephthalate (PBT) injection-moldable grade with excellent chemical resistance. It has a UL94V0 at 0.30mm and 5VA at 2.0mm flame rating, making it a good candidate for a variety of applications needing a sustainable FR PBT solution.