Products

FMSIL® 112 R is a precipitated and modified amorphous silica product, uniquely developed to provide rapid incorporation in rubber matrix & excellent dispersion behavior. It offers high filler loading with favorable rheological and mechanical properties, excellent calendaring properties. It imparts a superior matting effect, surface appearance, and low tension & compression set with good aging properties. It also provides superior abrasion resistance.

Synthetic Barium Sulfate (Basofix) is an inspired innovation from 20 Microns Nano Minerals limited. It is specifically developed for the masterbatches & pigments application.

Mag FR is a magnesium hydroxide (MDH) compound. Its processing temperature exceeds 220°C which indicates higher thermal stability. These products prevent ignition, flame spread & prolong escape time for thermoplastics and rubbers.

Flowax 30 MW is a polymeric base homopolymer dispersing additive. It has low viscosity & high melt that offers excellent wetting & dispersion effect. It offers excellent processability without damaging mechanical properties.

K - STOFF T is a unique MPA for filled compounds, which offers excellent bonding, to filler & polymer with the enhanced flow & improved mechanical properties.

Talc HFM 25 is sub-microns particle size platy talc with a high surface area & high aspect ratio to provide excellent barrier properties. During injection molding, these talcs act as ideal reinforcing fillers which provide greater stiffness & impact strength better dimensional stability. It is compatible with all thermoplastics & thermosets.

SR Filler is a functional additive. Its efficiency results from the unique irregular particle shapes, tight particle size distribution, bright & white color, and refractive index similar to the polyolefin resin.

Hyper 60 DM is a calcined metakaolin produced by removing chemically bound water from the crystal structure. This calcined clay is then specially treated with organo silane of two different chemistry.

Flowax 19 MW is a polymeric base homopolymer dispersing additive. Its low viscosity offers excellent wetting & dispersion effect. Its high melt and low viscosity offer excellent processability without damaging mechanical properties.

Phelmer G delivers low haze, high gloss, and clarity value in packaging grade flexible films without diminishing critical structural or mechanical properties. Phelmer G is used as cost-effective moderate to semi reinforcing fillers providing huge techno-commercial benefits in thermoplastics & thermoset compounding.

K - STOFF 440 is an oleochemical wetting & dispersing additive that offers excellent wetting characteristics and does not allow to form of the agglomerates of pigments particles in color MB application.

Our brand “Barigloss” for Darker Shades is an inspiring innovation from 20 MICRONS with an ultra-fine average particle size of 0.7 microns specially developed for paint, powder coating and pigments manufacturing application. Special production methods and various inorganic treatments now permit customized solutions for the most diverse range of problems/applications.

Vaporlite® CTD (Coated) is a surface treated ultra fine sub-micron natural calcium carbonate. The submicron particles can act as spacers between TiO2 particles leading to an increase in the efficiency of TiO2 in the application.

Hyper 60 DV is a calcined metakaolin produced by removing chemically bound water from the crystal structure. This calcined clay is then specially treated with organo silane of two different chemistry.

K - STOFF O is primary amides specially developed as mold release & slip additives for rubber application. In rubber application, these amide waxes also act as a processing aid and/or additive to improve the surface properties of both natural and synthetic rubbers such as NR, NBR, SBR, EPDM, CR, etc.

Synsil VN3 is a precipitated and modified amorphous silica product uniquely developed to provide rapid incorporation in rubber matrix & excellent dispersion behavior. They offer high filler loading with favorable rheological and mechanical properties and excellent calendaring properties. It imparts a superior matting effect & surface appearance, low tension & compression set with good aging properties and provides superior abrasion resistance.

Vaporlite® 90 (Uncoated) is the uncoated ultra fine sub-micron natural calcium carbonate. The submicron particles can act as spacers between TiO2 particles leading to an increase in the efficiency of TiO2 in the application.

Phelmer C delivers low haze, high gloss, and clarity value in packaging grade flexible films without diminishing critical structural or mechanical properties. Phelmer C is used as cost-effective moderate to semi reinforcing fillers providing huge techno-commercial benefits in thermoplastics & thermoset compounding.

K - STOFF E is a refined vegetable origin bio-based dispersing agent to improve lubrication.

Flowax 8 MW is a polymeric base homopolymer dispersing additive. Its low viscosity offers excellent wetting & dispersion effect. Its high melt and low viscosity offer excellent processability without damaging mechanical properties.

Hyper MP 33 a speciality calcined clay developed by calcining the purest and processed Kaolin.