Products

MBD 40227 is a masterbatch filled with 2.5% fluorated processing aid on a LLDPE support. For SDS, please contact Addiplast Group using the 'Request Document' button.

Mineral loaded copolymer PP, impact resistant, density 1.9. For SDS, please contact Addiplast Group using the 'Request Document' button.

The MBD 40170 is a masterbatch containing 5 % of an antistatic agent type ethoxylated amine and 10 % of an antiblock agent, on a PE low density base. For SDS, please contact Addiplast Group using the 'Request Document' button.

PA 6 compound density 2. For SDS, please contact Addiplast Group using the 'Request Document' button.

PP compound, low shrinkage, suitable for vacuum. For SDS, please contact Addiplast Group using the 'Request Document' button.

Mineral loaded homopolymer PP, density 2.4. For SDS, please contact Addiplast Group using the 'Request Document' button.

Mineral loaded copolymer PP, density 1.4. For SDS, please contact Addiplast Group using the 'Request Document' button.

PA 6 Piano black High Gloss. For SDS, please contact Addiplast Group using the 'Request Document' button.

Copolymer PP for electro-plating. For SDS, please contact Addiplast Group using the 'Request Document' button.

Mineral loaded ABS. Density 1.6. For SDS, please contact Addiplast Group using the 'Request Document' button.

High density green PP compound. For SDS, please contact Addiplast Group using the 'Request Document' button.

The MBD 40245 is a masterbatch containing 5% of Erucamid, based on a LDPE resin. For SDS, please contact Addiplast Group using the 'Request Document' button.

Recycled PP coumpound 25% natural fibers. For SDS, please contact Addiplast Group using the 'Request Document' button.

High Performance Polymer for Polypropylene Modification, based on hydrocarbon resin C5, with a softening point above 140°C. For SDS, please contact Addiplast Group using the 'Request Document' button.

The MBD 40161 is a masterbatch containing 5% fluorinated copolymer based on LDPE resin. For SDS, please contact Addiplast Group using the 'Request Document' button.

Low friction coefficient PBT compound for injection. For SDS, please contact Addiplast Group using the 'Request Document' button.

ADDILENE® H 400 is a Polypropylene Homopolymer pharmacopeia and FDA. If white 24, mass colored ready to use. For SDS, please contact Addiplast Group using the 'Request Document' button.

Biobased thermoplastic compound with natural fibers (not coming from food ressources) for injected parts, low density, high modulus & high temperature resistance. For SDS, please contact Addiplast Group using the 'Request Document' button.

100% PCR PP compound black for aesthetic injected parts. Comply with Reach Regulation 1907/2006 & RoHS Directive 2011/65/EU & its amendment Directive 2015/863/EU. For SDS, please contact Addiplast Group using the 'Request Document' button.

PA 6 compound density 2.5. For SDS, please contact Addiplast Group using the 'Request Document' button.

20% Biobased PP compound for aesthetic parts. Complaint with European regulation 10/2011/EC of 14 th January 2011 amended by regulation 2018/213 of 12 th February 2018 (*). Compliant with California Proposition 65 of 23 th November 2018. For SDS, please contact Addiplast Group using the 'Request Document' button.

ABS good mechanical properties, good weatherabilit. For SDS, please contact Addiplast Group using the 'Request Document' button.

The MBD 50622 is a nucleating/clarifying masterbatch based on a homopolymer PP resin. This MB is used to improve the mechanical and optical properties in PP films and injected parts. For SDS, please contact Addiplast Group using the 'Request Document' button.

Mineral loaded copolymer PP, density 2, high fluidity. For SDS, please contact Addiplast Group using the 'Request Document' button.

The MBD 50699 is a masterbatch containing 70% of extra-lamellar talc based on a polypropylene resin. This masterbatch can be used in dilution during the extrusion of compounds or directly in injection molding. For SDS, please contact Addiplast Group using the 'Request Document' button.

Homopolymer PP for electro-plating. For SDS, please contact Addiplast Group using the 'Request Document' button.