Products

AGC Chemicals Americas, Inc. RESIFA™ SUNSPERA™ D-70-120A (LV) silica gel is an excellent catalyst support in the manufacture of polyethylene and polypropylene. This is because of its chemical inertness, large surface area, and porosity level. The properties of the SUNSPERA™ silica gel have a significant effect on the polymerization process and properties of the finished polymer. This product is very suitable for Ziegler-Natta or Phillips catalysts.

AGC Chemicals Americas, Inc. Fluon+™ Polycomp 158 (310999302) is a polyphenylene sulfide-filled PTFE compound designed for use in seal applications. This compound is supplied in dry powder form. Polyphenylene sulfide is added to improve the wear properties, compressive strength, and creep resistance of PTFE without sacrificing the chemical and thermal resistance of the polymer.

AGC Chemicals Americas, Inc. LUMIFLON® LF200F - FEVE Resin Polyol is a fluoroethylene vinyl ether polyol used in applications requiring outstanding exterior durability and excellent chemical resistance. It is formulated into low VOC, 2K crosslinkable coatings. It has both moderate molecular weight and hydroxyl value making it a versatile polyol for various applications. Markets include heavy duty industrial coatings, architectural coatings, aerospace coatings, automotive coatings, and coatings for concrete.

AGC Chemicals Americas, Inc. LUMIFLON® LF-200F is a moderate molecular weight, moderate hydroxyl number resin consisting of alternating fluoroethylene and alkyl vinyl ether segments (FEVE). This product has been developed in flake form in order to enable formulators to meet VOC and HAPS regulations. This resin can be dissolved in VOC and HAPS exempt solvents such as acetone, Oxsol® 100, t-butyl acetate, and dimethyl carbonate to meet the strictest air quality requirements. LUMIFLON resins are used to make ultra-weatherable coatings for architectural, aerospace, automotive, and industrial maintenance markets.

AGC Chemicals Americas, Inc. Fluon+™ FC 100 BL5-730 (311100576) is a blue pigmented PTFE product designed for gasket and seal applications. It is supplied in dry powder form and is suitable for use when chemical and thermal resistance of PTFE is required with a blue pigmented appearance.

AGC Chemicals Americas, Inc. LUMIFLON® LF916F - FEVE Resin Polyol is a fluoroethylene vinyl ether polyol used in applications requiring outstanding exterior durability and excellent chemical resistance. It is formulated into low VOC, 2K crosslinkable coatings. It has a lower molecular weight combined with a high hydroxyl value for formulating highly crosslinked 2K coatings with excellent performance properties. Markets include heavy duty industrial coatings, architectural coatings, aerospace coatings, automotive coatings, and coatings for concrete.

AGC Chemicals Americas, Inc. RESIFA™ SUNSPERA™ DM L-303 silica gel is an excellent catalyst support in the manufacture of polyethylene and polypropylene. This is because of its chemical inertness, large surface area, and porosity level. The properties of the SUNSPERA™ silica gel have a significant effect on the polymerization process and properties of the finished polymer. This product is recommended as a metallocene catalyst support.

AGC Chemicals Americas, Inc. LUMIFLON® LF-916F is a low molecular weight resin that is used to create coatings with high crosslink density. This resin is made of alternating fluoroethylene and alkyl vinyl ether segments (FEVE) and comes in flake form to comply with regulations for VOC and HAPS. It can be dissolved in solvents that are exempt from these regulations, such as acetone, Oxsol® 100, t-butyl acetate, and dimethyl carbonate. These resins are used to produce coatings that are highly resistant to weathering, and are commonly used in various industries like architecture, aerospace, automotive and industrial maintenance.

AGC Chemicals Americas, Inc. RESIFA™ SOLESPHERE™ H-122 is a synthetic spherical silica with low cohesiveness and high fluidity. This SOLESPHERE™ product is a high-oil absorption grade with over twice the absorption capacity of the normal type. It is bulky, easily dispersible, and has distinct properties.

AGC Chemicals Americas, Inc. RESIFA™ SOLESPHERE™ H-52 is a synthetic spherical silica with low cohesiveness and high fluidity. This SOLESPHERE™ product is a high-oil absorption grade with over twice the absorption capacity of the normal type. It is bulky, easily dispersible, and has distinct properties.

AGC Chemicals Americas, Inc. RESIFA™ SOLESPHERE™ H-201 is a synthetic spherical silica with low cohesiveness and high fluidity. This product is multi-porous and has a high specific surface area. This RESIFA™ SOLESPHERE™ silica is used for catalyst supports, as an additive in cosmetic and personal care applications, and in industrial applications.

AGC Chemicals Americas, Inc. RESIFA™ SOLESPHERE™ H-51 is a synthetic spherical silica with low cohesiveness and high fluidity. This product is multi-porous and has a high specific surface area. This RESIFA™ SOLESPHERE™ silica is used for catalyst supports, as an additive in cosmetic and personal care applications, and in industrial applications.

AGC Chemicals Americas, Inc. RESIFA™ SOLESPHERE™ H-53 is a synthetic spherical silica with low cohesiveness and high fluidity. This SOLESPHERE™ product is a high-oil absorption grade with over twice the absorption capacity of the normal type. It is bulky, easily dispersible, and has distinct properties.

AGC Chemicals Americas, Inc. RESIFA™ SOLESPHERE™ H-121 is a synthetic spherical silica with low cohesiveness and high fluidity. This product leaves a smooth, hydrated skin feel with a matte visual effect. It is multi-porous and has a high specific surface area. This product offers the most functionality for O/W emulsions.

AGC Chemicals Americas, Inc. RESIFA™ SOLESPHERE™ H-31 is a synthetic spherical silica with low cohesiveness and high fluidity. This product is multi-porous and has a high specific surface area. This RESIFA™ SOLESPHERE™ silica is used for catalyst supports, as an additive in cosmetic and personal care applications, and in industrial applications.

AGC Chemicals Americas, Inc. RESIFA™ SOLESPHERE™ H-33 is a synthetic spherical silica with low cohesiveness and high fluidity. This SOLESPHERE™ product is a high-oil absorption grade with over twice the absorption capacity of the normal type. It is bulky, easily dispersible, and has distinct properties.

AGC Chemicals Americas, Inc. Fluon+™ Glass-Reinforced PF-21001 is a reinforced PFA compound designed for use in injection molding or extrusion applications where additional mechanical properties are required. The compound contains 25% glass fiber and 75% PFA, a copolymer of tetrafluoroethylene and perfluoroalkoxyethylene. These pre-pigmented black pellets are approximately 0.080 inches in diameter and 0.125 inches long, and are suitable for applications that demand the thermal and chemical resistance of PFA, along with the additional mechanical toughness provided by the glass fiber reinforcement.

AGC Chemicals Americas, Inc. Fluon+™ ETFE C-88AXM HT Orange Concentrate is an orange-colored concentrate designed for use in medium to high-flow ETFE (Ethylene tetrafluoroethylene) for pigmentation. The color concentrate is based on Fluon® ETFE C-88AXM-HT and is supplied in cylindrical pellet form. These pellets are approximately 0.080 inches in diameter by 0.080 inches long. It finds applications in colored injection-molded parts, film, tubing, colored wire or jacket insulation where a pigmented appearance is required.

AGC Chemicals Americas, Inc. Fluon+™ FC444.0 (340444004) is a 40% bronze filled PTFE product designed for use in seal applications. This compound is supplied in round pelletized form. These pellets range in size from approximately 350 - 800 microns. Bronze powder is added to PTFE to increase the thermal and electrical conductivity and to improve the wear properties and deformation resistance without sacrificing the chemical and thermal resistance of the polymer.

AGC Chemicals Americas, Inc. Fluon+™ ETFE C-88AXM Yellow Concentrate is a yellow color concentrate designed for use in medium to high flow ETFE (Ethylene tetrafluoroethylene) for pigmentation. The color concentrate is based on Fluon® ETFE C-88AXM and is supplied in cylindrical pellet form. These pellets are approximately 0.080 inches long by 0.080 inches in diameter. This product finds major applications in colored injection molded parts, film, tubing, colored wire or jacket insulation where a pigmented appearance is required.

AGC Chemicals Americas, Inc. Fluon+™ FP-EC-150 (464120042) is a conductive ETFE product that is designed for use in wire and cable applications. Carbon black is added at high concentrations for conductivity and to improve certain physical properties of ETFE. This compound is supplied in cylindrical pellet form and the pellets are approximately 0.125” in length by 0.085” in diameter.

AGC Chemicals Americas, Inc. Fluon+™ ETFE C-88AXM Gray Concentrate is a gray color concentrate designed for use in medium to high flow ETFE (Ethylene tetrafluoroethylene) for pigmentation. The color concentrate is based on Fluon® ETFE C-88AXM and is supplied in cylindrical pellet form. These pellets are approximately 0.080 inches long by 0.080 inches in diameter. This product finds major applications in colored injection molded parts, film, tubing, colored wire or jacket insulation where a pigmented appearance is required.

AGC Chemicals Americas, Inc. Fluon+™ Polycomp 148 (310999295) is a composite material made of PTFE, polyphenylene sulfide, and graphite. It is designed for use in seal applications and is supplied in dry powder form. The addition of polyphenylene sulfide and graphite improves the wear properties, compressive strength, and creep resistance of PTFE while maintaining its chemical and thermal resistance. This material can be processed using compression molding equipment to create thick-walled parts.

AGC Chemicals Americas, Inc. Fluon+™ FEP 100 Yellow Concentrates are yellow-colored concentrates designed for use in low-flow FEP (Fluorinated ethylene propylene) for pigmentation. The color concentrates are based on Chemours Teflon® FEP 100 and are supplied in cylindrical pellet form. These pellets are approximately 0.080 inches long by 0.080 inches in diameter. This product finds major applications in colored injection-molded parts, film, tubing, colored wire or jacket insulation where a pigmented appearance is required.

AGC Chemicals Americas, Inc. Fluon® ETFE C-55AXP is a melt-processable copolymer of tetrafluoroethylene and ethylene that offers a unique combination of properties such as high resistance to heat and chemical attack and exceptional physical toughness. It can be processed using conventional methods like extrusion, injection molding, rotomolding, rotolining, and electrostatic coating and is available in the form of 1/8 inch pellets.

AGC Chemicals Americas, Inc. Fluon+™ E-LaserWrite is a series of concentrates designed for use in wire and cable applications that require written identification via laser marking. Fluon+™ E-LaserWrite can be added to the jacket or insulation resin, along with a standard color concentrate, to allow most constructions to be marked via laser. Fluon+™ E-LaserWrite is based on a variety of fluoropolymer resins and is supplied as a cylindrical pellet.

AGC Chemicals Americas, Inc. Fluon® PTFE G350 is a fine agglomerated, free-flowing powder specifically designed for automatic molding, isostatic molding, and general molding techniques. These grades have high bulk density with excellent flow characteristics. Articles molded from Fluon® PTFE G350 and G355 exhibit good mechanical properties and surface finish.

AGC Chemicals Americas, Inc. Fluon+™ ETFE C-88AXM White Concentrate is a white color concentrate designed for use in medium to high flow ETFE (Ethylene tetrafluoroethylene) for pigmentation. The color concentrate is based on Fluon® ETFE C-88AXM and is supplied in cylindrical pellet form. These pellets are approximately 0.080 inches long by 0.080 inches in diameter. This product finds major applications in colored injection molded parts, film, tubing, colored wire or jacket insulation where a pigmented appearance is required.

AGC Chemicals Americas, Inc. Fluon+™ PFA 2100 Red Concentrate is a red color concentrate designed for use in medium flow PFA (Perfluoroalkoxy) for pigmentation. These pellets are approximately 0.080 inches long by 0.080 inches in diameter. It is used in colored injection molded parts, film, tubing, colored wire or jacket insulation where a pigmented appearance is required.

AGC Chemicals Americas, Inc. Fluon+™ FEP 108 White Concentrate is a white-colored concentrate designed for use in high-flow FEP (fluorinated ethylene propylene) for pigmentation. The color concentrate is based on Daikin Neoflon® FEP NP-108 and is supplied in cylindrical pellet form. These pellets are approximately 0.080 inches long by 0.080 inches in diameter. It finds applications in colored injection-molded parts, film, tubing, colored wire or jacket insulation where a pigmented appearance is required.

AGC Chemicals Americas, Inc. Fluon+™ ETFE 7 White Concentrate is a white color concentrate designed for use in low and medium flow ETFE (Ethylene tetrafluoroethylene) for pigmentation. The color concentrate is based on Fluon® C-88A and is supplied in cylindrical pellet form. These pellets are approximately 0.080 inches long by 0.080 inches in diameter. This product finds major applications in colored injection molded parts, film, tubing, colored wire or jacket insulation where a pigmented appearance is required.

AGC Chemicals Americas, Inc. Fluon+™ PFA 2100 Yellow Concentrate is a color concentrate in yellow color designed to be used in medium flow PFA (Perfluoroalkoxy) for pigmentation. It is available in the form of small pellets, approximately 0.080 inches long by 0.080 inches in diameter. It is used to add color to injection-molded parts, film, tubing, colored wire or jacket insulation when a pigmented appearance is desired.

AGC Chemicals Americas, Inc. Fluon+™ PFA 3000 Brown Concentrate is a brown-colored concentrate designed for use in high-flow PFA (Perfluoroalkoxy) for pigmentation. The color concentrate is based on Fluon® PFA P-62X and is supplied in cylindrical pellet form. These pellets are approximately 0.080 inches in diameter by 0.080 inches long. It finds applications in colored injection-molded parts, film, tubing, colored wire or jacket insulation where a pigmented appearance is required.

AGC Chemicals Americas, Inc. Fluon+™ FEP 9800 Black Concentrate is a black-colored concentrate designed for use in high-flow FEP (Fluorinated ethylene propylene) for pigmentation. The color concentrate is based on Chemours Teflon® FEP TE-9494 and is supplied in cylindrical pellet form. These pellets are approximately 0.080 inches in diameter by 0.080 inches long. It finds applications in colored injection-molded parts, film, tubing, colored wire or jacket insulation where a pigmented appearance is required.

AGC Chemicals Americas, Inc. Fluon+™ Polycomp 185 (310999242) is a PTFE product filled with a combination of polyphenylene sulfide and graphite. It is designed for use in large billet molding and is supplied in dry powder form. The addition of polyphenylene sulfide and graphite improves the wear properties, abrasion resistance, and deformation resistance of PTFE without compromising its chemical and thermal resistance. This product is suitable for use in large-scale manufacturing processes and can be molded into thick-walled parts using compression molding equipment.

AGC Chemicals Americas, Inc. Fluon+™ ETFE 7 Violet Concentrate is a violet color concentrate designed for use in low and medium flow ETFE (Ethylene tetrafluoroethylene) for pigmentation. The color concentrate is based on Fluon® C-88A and is supplied in cylindrical pellet form. These pellets are approximately 0.080 inches long by 0.080 inches in diameter. This product finds major applications in colored injection molded parts, film, tubing, colored wire or jacket insulation where a pigmented appearance is required.