Products

AGC Chemicals Americas, Inc. Fluon+™ Glass-Reinforced PF-21001 is a reinforced PFA compound designed for use in injection molding or extrusion applications where additional mechanical properties are required. The compound contains 25% glass fiber and 75% PFA, a copolymer of tetrafluoroethylene and perfluoroalkoxyethylene. These pre-pigmented black pellets are approximately 0.080 inches in diameter and 0.125 inches long, and are suitable for applications that demand the thermal and chemical resistance of PFA, along with the additional mechanical toughness provided by the glass fiber reinforcement.

AGC Chemicals Americas, Inc. Fluon® PTFE G350 is a fine agglomerated, free-flowing powder specifically designed for automatic molding, isostatic molding, and general molding techniques. These grades have high bulk density with excellent flow characteristics. Articles molded from Fluon® PTFE G350 and G355 exhibit good mechanical properties and surface finish.

AGC Chemicals Americas, Inc. Fluon® PTFE G355 is a fine agglomerated, free-flowing powder specifically designed for automatic molding, isostatic molding, and general molding techniques. These grades have high bulk density with excellent flow characteristics. Articles molded from Fluon® PTFE G350 and G355 exhibit good mechanical properties and surface finish.

AGC Chemicals Americas, Inc. Fluon+™ FP-EF-101 (464102517) is a 5% glass-reinforced ETFE product designed for use in injection molding or extrusion applications. The glass fibers are added to improve the physical properties of ETFE. This compound is supplied in cylindrical pellet form and the pellets are approximately 0.125” in length by 0.100” in diameter.

AGC Chemicals Americas, Inc. Fluon® PFA P-66P is a melt-processible copolymer of tetrafluoroethylene and a perfluorinated vinyl ether. It has chemical, electrical, and thermal properties that are similar to polytetrafluoroethylene (PTFE), but can be processed using conventional extrusion, injection molding, blow molding, and transfer molding techniques. This versatile material can withstand a wide range of temperatures (-200°C to 260°C) and is available in the form of 1/8 inch pellets. It is commonly used for extrusion, transfer, compression, and injection molding, and offers the best resistance to stress cracking among the PFA materials.

AGC Chemicals Americas, Inc. Fluon® PFA P-62XP (perfluoroalkoxy) is a melt-processible copolymer of tetrafluoroethylene and a perfluorinated vinyl ether. Fluon® PFA P-62XP has chemical, electrical, and thermal properties almost identical to its close chemical cousin, polytetrafluoroethylene (PTFE), yet can be processed by conventional extrusion, injection molding, blow molding, and transfer molding techniques. This unique material can be used over a wide range of temperatures (-200°C to 260°C). It is available as a 1/8 inch pellet.

AGC Chemicals Americas, Inc. Fluon® PTFE G155 is a virgin granular PTFE homopolymer. It is a fine powder grade that can be used for molding, but is mainly intended as a feedstock for making filled compounds. Its properties allow for minimal insulation thickness while also tolerating a wide range of temperatures (-180°C to 260°C) compared to other insulators.

AGC Chemicals Americas, Inc. Fluon® PFA P-65P is a melt-processible copolymer of tetrafluoroethylene and a perfluorinated vinyl ether. It has chemical, electrical, and thermal properties that are similar to polytetrafluoroethylene (PTFE), but can be processed using conventional extrusion, injection molding, blow molding, and transfer molding techniques. This versatile material can withstand a wide range of temperatures (-200°C to 260°C) and is available in the form of 1/8 inch pellets. It is commonly used for general-purpose extrusion and injection molding and offers better stress crack resistance compared to P-63P.

AGC Chemicals Americas, Inc. Fluon+™ FP-EF-105 (464102520) is a 25% glass-reinforced ETFE product designed for use in injection molding or extrusion applications. The glass fibers are added to improve the physical properties of ETFE. This compound is supplied in cylindrical pellet form and the pellets are approximately 0.125” in length by 0.100” in diameter.

AGC Chemicals Americas, Inc. Fluon® PTFE CD127E are white, free-flowing powders made by coagulating aqueous dispersions of polytetrafluoroethylene. These grades are high molecular-weight homopolymers with excellent thermal stability. The processes used to make CD127E do not use ammonium salts of perfluorooctanoic acid (PFOA), making them an environmentally friendly option. They have been developed for paste extrusion into tapes, tubes, pipe liners, and coated wires, making them ideal for a wide range of industrial applications.

AGC Chemicals Americas, Inc. Fluon® ETFE LM-730A is a modified ethylene tetrafluoroethylene (ETFE) polymer. Unlike most other ETFE materials, LM-730A has a lower melting point of 225°C (compared to 260°C for most ETFE), improved chemical resistance and thermal stability, enhanced optical clarity, increased flexibility, and a higher limiting oxygen index of 40% (compared to 31% for most ETFE). It can be processed using conventional extrusion and injection molding techniques and is used for general-purpose extrusion and injection molding applications.

AGC Chemicals Americas, Inc. Fluon+™ FP-EF-103 (464102519) is a 15% glass-reinforced ETFE product designed for use in injection molding or extrusion applications. The glass fibers are added to improve the physical properties of ETFE. This compound is supplied in cylindrical pellet form and the pellets are approximately 0.125” in length by 0.100” in diameter.

AGC Chemicals Americas, Inc. Fluon® ETFE LM-2300N is a melt-processable copolymer of tetrafluoroethylene and ethylene. It offers a unique combination of properties such as enhanced resistance to heat and chemical attack, and exceptional physical toughness. Rotational molding and lining grades are formulated as free-flowing powders with specific particle morphologies to uniformly coat complex and challenging parts. It is used in rotational lining of components in the Chemical Process Industry (CPI) for fluid handling such as valves, pumps, pipes, fittings, tanks, and other intricate parts.

AGC Chemicals Americas, Inc. Fluon® PFA P-63P is a melt-processible copolymer of tetrafluoroethylene and a perfluorinated vinyl ether. It has chemical, electrical, and thermal properties that are similar to polytetrafluoroethylene (PTFE), but can be processed using conventional extrusion, injection molding, blow molding, and transfer molding techniques. This versatile material can withstand a wide range of temperatures (-200°C to 260°C) and is available in the form of 1/8 inch pellets. It is commonly used in general purpose extrusion and injection molding.

AGC Chemicals Americas, Inc. Fluon® ETFE TL-081 is a melt-processable copolymer of tetrafluoroethylene and ethylene that possesses a unique combination of desirable properties such as higher resistance to heat and abrasion, stress-crack resistance, and high fluidity. Various powder grades are available for different processing methods and application needs.

AGC Chemicals Americas, Inc. Fluon® ETFE Z-885C is a melt-processable copolymer of tetrafluoroethylene and ethylene. It possesses a unique combination of desirable properties such as higher resistance to heat and chemical attack, outstanding physical toughness, and non-stick characteristics. It is used as non-stick coating, applied through electrostatic coating method.

AGC Chemicals Americas, Inc. Fluon® ETFE LM2300K is a melt-processable copolymer of tetrafluoroethylene and ethylene. It possesses a unique combination of desirable properties such as higher heat and chemical attack resistance and outstanding physical toughness. Its rotational molding and lining grades are designed to be free-flowing powders with particle morphologies necessary to uniformly coat the most challenging and complex parts.

AGC Chemicals Americas, Inc. Fluon® ETFE ZL-521N is a melt-processable copolymer of tetrafluoroethylene and ethylene that possesses a unique combination of desirable properties such as higher resistance to heat and abrasion, stress-crack resistance, and high fluidity. Various powder grades are available for different processing methods and application needs.

AGC Chemicals Americas, Inc. Fluon® ETFE Z-8820X is a melt-processable copolymer of tetrafluoroethylene and ethylene. It possesses a unique combination of desirable properties such as higher resistance to heat and chemical attack, outstanding physical toughness, and non-stick characteristics. It is used as non-stick coating, applied through electrostatic coating method.

AGC Chemicals Americas, Inc. Fluon® ETFE ZL-520N is a melt-processable copolymer of tetrafluoroethylene and ethylene that possesses a unique combination of desirable properties such as higher resistance to heat and abrasion, stress-crack resistance, and 20% carbon fiber undercoat. Various powder grades are available for different processing methods and application needs.

AGC Chemicals Americas, Inc. Fluon® ETFE TL-581 is a melt-processable copolymer of tetrafluoroethylene and ethylene that possesses a unique combination of desirable properties such as higher resistance to heat and abrasion, stress-crack resistance, and high fluidity. Various powder grades are available for different processing methods and application needs.

AGC Chemicals Americas, Inc. Fluon® ETFE ZL-522F is a melt-processable copolymer of tetrafluoroethylene and ethylene that possesses a unique combination of desirable properties such as higher resistance to heat and abrasion, stress-crack resistance, and high fluidity. Various powder grades are available for different processing methods and application needs.

AGC Chemicals Americas, Inc. Fluon® ETFE TL-584 is a melt-processable copolymer of tetrafluoroethylene and ethylene that boasts a unique combination of desirable properties, including higher resistance to heat and chemical attack, as well as outstanding physical toughness. Rotational molding and lining grades of Fluon® ETFE TL-584 are designed to be free-flowing powders with the necessary particle morphologies to uniformly coat even the most challenging and complex parts.

AGC Chemicals Americas, Inc. Fluon® ETFE ZH-885B is a melt-processable copolymer of tetrafluoroethylene and ethylene. It possesses a unique combination of desirable properties such as higher resistance to heat and chemical attack, outstanding physical toughness, and non-stick characteristics. It is used as hard coat, applied through electrostatic coating method.

AGC Chemicals Americas, Inc. Fluon® ETFE LM-2150 is a melt-processable copolymer of tetrafluoroethylene and ethylene. It possesses a unique combination of desirable properties such as higher resistance to heat and chemical attack, outstanding physical toughness, and non-stick characteristics. It is used as low-melt ETFE, smooth surface, non-adhesive, semi-commercial coating, applied through electrostatic coating method.

AGC Chemicals Americas, Inc. Fluon® ETFE LM-720A is a modified ethylene tetrafluoroethylene (ETFE) polymer. Unlike most other ETFE materials, LM-720A has a lower melting point of 225°C (compared to 260°C for most ETFE), improved chemical resistance and thermal stability, enhanced optical clarity, increased flexibility, and a higher limiting oxygen index of 40% (compared to 31% for most ETFE). It can be processed using conventional extrusion and injection molding techniques and is used for general-purpose extrusion and injection molding applications. Additionally, it has better stress crack resistance compared to LM-730A.

AGC Chemicals Americas, Inc. Fluon® PTFE G307 is a general-purpose molding powder composed of relatively large, spherical agglomerates. It is a free-flowing resin with excellent flow characteristics. Articles molded from Fluon G307 exhibit good mechanical properties and surface finish. Applications include the automatic molding of stock shapes, the isostatic molding of pipe liners and fittings, and the compression molding of billets and sheets.

AGC Chemicals Americas, Inc. Fluon® ETFE LM-740A is a modified ethylene tetrafluoroethylene (ETFE) polymer. Unlike most other ETFE materials, LM-740A has a lower melting point of 225°C (compared to 260°C for most ETFE), improved chemical resistance and thermal stability, enhanced optical clarity, increased flexibility, and a higher limiting oxygen index of 40% (compared to 31% for most ETFE). It can be processed using conventional extrusion and injection molding techniques and is used for general-purpose extrusion and injection molding applications. Additionally, it has a higher flow rate than LM-730A.

AGC Chemicals Americas, Inc. Fluon+™ FP-EF-102 (464102518) is a 10% glass-reinforced ETFE product designed for use in injection molding or extrusion applications. The glass fibers are added to improve the physical properties of ETFE. This compound is supplied in cylindrical pellet form and the pellets are approximately 0.125” in length by 0.100” in diameter.

AGC Chemicals Americas, Inc. Fluon® PTFE CD123E are white, free-flowing powders made by coagulating aqueous dispersions of polytetrafluoroethylene. These grades are high molecular-weight homopolymers with excellent thermal stability. The processes used to make CD123E do not use ammonium salts of perfluorooctanoic acid (PFOA). They have been developed for paste extrusion into tapes, tubes, pipe liners, and coated wires.

AGC Chemicals Americas, Inc. Fluon® HR-930 Heat Resistant LM-ETFE is a specially designed high-flow, low-melting copolymer of ethylene and tetrafluoroethylene. It delivers superior thermal stability when compared to standard ETFE materials. This product can be processed using conventional thermoplastics techniques such as extrusion and injection molding and is available as a 1/8” pellet.

AGC Chemicals Americas, Inc. Fluon® HR-907 Heat Resistant LM-ETFE is a specially designed low-flow, low-melting copolymer of ethylene and tetrafluoroethylene. It delivers superior thermal stability when compared to standard ETFE materials. This product can be processed using conventional thermoplastics techniques such as extrusion and injection molding and is available as a 1/8” pellet.

AGC Chemicals Americas, Inc. Fluon® PTFE G163 is a virgin granular PTFE homopolymer. It is a fine powder grade used for molding but also intended as a feedstock for making filled PTFE compounds. Resin properties keep the insulation thickness to a minimum while tolerating a wider range of temperatures (-180 °C to 260 °C) than other insulators.