Products

AGC Chemicals Americas, Inc. Fluon+™ ETFE 7 White Concentrate is a white color concentrate designed for use in low and medium flow ETFE (Ethylene tetrafluoroethylene) for pigmentation. The color concentrate is based on Fluon® C-88A and is supplied in cylindrical pellet form. These pellets are approximately 0.080 inches long by 0.080 inches in diameter. This product finds major applications in colored injection molded parts, film, tubing, colored wire or jacket insulation where a pigmented appearance is required.

AGC Chemicals Americas, Inc. Fluon+™ ETFE C-88AXM Yellow Concentrate is a yellow color concentrate designed for use in medium to high flow ETFE (Ethylene tetrafluoroethylene) for pigmentation. The color concentrate is based on Fluon® ETFE C-88AXM and is supplied in cylindrical pellet form. These pellets are approximately 0.080 inches long by 0.080 inches in diameter. This product finds major applications in colored injection molded parts, film, tubing, colored wire or jacket insulation where a pigmented appearance is required.

AGC Chemicals Americas, Inc. Fluon+™ ETFE 7 Gray Concentrate is a gray color concentrate designed for use in low and medium flow ETFE (Ethylene tetrafluoroethylene) for pigmentation. The color concentrate is based on Fluon® C-88A and is supplied in cylindrical pellet form. These pellets are approximately 0.080 inches long by 0.080 inches in diameter. This product finds major applications in colored injection molded parts, film, tubing, colored wire or jacket insulation where a pigmented appearance is required.

AGC Chemicals Americas, Inc. Fluon+™ FEP 9400 Red Concentrate is a red-colored concentrate designed for use in high-flow FEP (Fluorinated ethylene propylene) for pigmentation. The color concentrate is based on Chemours Teflon® FEP TE-9494 and is supplied in cylindrical pellet form. These pellets are approximately 0.080 inches in diameter by 0.080 inches long. It finds applications in colored injection-molded parts, film, tubing, colored wire or jacket insulation where a pigmented appearance is required.

AGC Chemicals Americas, Inc. Fluon+™ FEP 100 White Concentrates are white-colored concentrates designed for use in low-flow FEP (Fluorinated ethylene propylene) for pigmentation. The color concentrates are based on Chemours Teflon® FEP 100 and are supplied in cylindrical pellet form. These pellets are approximately 0.080 inches long by 0.080 inches in diameter. This product finds major applications in colored injection-molded parts, film, tubing, colored wire or jacket insulation where a pigmented appearance is required.

AGC Chemicals Americas, Inc. Fluon+™ PVDF White 9 Concentrates are white-colored concentrates designed for use in PVDF (Polyvinylidene fluoride) for pigmentation. The color concentrates are based on Arkema Kynar® PVDF 2850-04 and are supplied in cylindrical pellet form. These pellets are approximately 0.080 inches in diameter by 0.080 inches long. It finds applications in colored injection-molded parts, film, tubing, colored wire or jacket insulation where a pigmented appearance is required.

AGC Chemicals Americas, Inc. Fluon+™ FEP 9800 Red Concentrate is a red-colored concentrate designed for use in high-flow FEP (Fluorinated ethylene propylene) for pigmentation. The color concentrate is based on Chemours Teflon® FEP TE-9494 and is supplied in cylindrical pellet form. These pellets are approximately 0.080 inches in diameter by 0.080 inches long. It finds applications in colored injection-molded parts, film, tubing, colored wire or jacket insulation where a pigmented appearance is required.

AGC Chemicals Americas, Inc. Fluon® PFA P-65P is a melt-processible copolymer of tetrafluoroethylene and a perfluorinated vinyl ether. It has chemical, electrical, and thermal properties that are similar to polytetrafluoroethylene (PTFE), but can be processed using conventional extrusion, injection molding, blow molding, and transfer molding techniques. This versatile material can withstand a wide range of temperatures (-200°C to 260°C) and is available in the form of 1/8 inch pellets. It is commonly used for general-purpose extrusion and injection molding and offers better stress crack resistance compared to P-63P.

AGC Chemicals Americas, Inc. Fluon+™ FEP 108 Orange Concentrate is an orange-colored concentrate designed for use in high-flow FEP (fluorinated ethylene propylene) for pigmentation. The color concentrate is based on Daikin Neoflon® FEP NP-108 and is supplied in cylindrical pellet form. These pellets are approximately 0.080 inches long by 0.080 inches in diameter. It finds applications in colored injection-molded parts, film, tubing, colored wire or jacket insulation where a pigmented appearance is required.

AGC Chemicals Americas, Inc. Fluon+™ PFA 3000 Black Concentrate is a black-colored concentrate designed for use in high-flow PFA (Perfluoroalkoxy) for pigmentation. The color concentrate is based on Fluon® PFA P-62X and is supplied in cylindrical pellet form. These pellets are approximately 0.080 inches in diameter by 0.080 inches long. It finds applications in colored injection-molded parts, film, tubing, colored wire or jacket insulation where a pigmented appearance is required.

AGC Chemicals Americas, Inc. Fluon+™ FEP 100 Orange Concentrates are orange-colored concentrates designed for use in low-flow FEP (Fluorinated ethylene propylene) for pigmentation. The color concentrates are based on Chemours Teflon® FEP 100 and are supplied in cylindrical pellet form. These pellets are approximately 0.080 inches long by 0.080 inches in diameter. This product finds major applications in colored injection-molded parts, film, tubing, colored wire or jacket insulation where a pigmented appearance is required.

AGC Chemicals Americas, Inc. Fluon+™ PVDF Gray 10 Concentrates are gray-colored concentrates designed for use in PVDF (Polyvinylidene fluoride) for pigmentation. The color concentrates are based on Arkema Kynar® PVDF 2850-04 and are supplied in cylindrical pellet form. These pellets are approximately 0.080 inches in diameter by 0.080 inches long. It finds applications in colored injection-molded parts, film, tubing, colored wire or jacket insulation where a pigmented appearance is required.

AGC Chemicals Americas, Inc. Fluon+™ FEP 9800 Green Concentrate is a green-colored concentrate designed for use in high-flow FEP (Fluorinated ethylene propylene) for pigmentation. The color concentrate is based on Chemours Teflon® FEP TE-9494 and is supplied in cylindrical pellet form. These pellets are approximately 0.080 inches in diameter by 0.080 inches long. It finds applications in colored injection-molded parts, film, tubing, colored wire or jacket insulation where a pigmented appearance is required.

AGC Chemicals Americas, Inc. Fluon+™ FEP 9800 Violet Concentrate is a violet-colored concentrate designed for use in high-flow FEP (Fluorinated ethylene propylene) for pigmentation. The color concentrate is based on Chemours Teflon® FEP TE-9494 and is supplied in cylindrical pellet form. These pellets are approximately 0.080 inches in diameter by 0.080 inches long. It finds applications in colored injection-molded parts, film, tubing, colored wire or jacket insulation where a pigmented appearance is required.

AGC Chemicals Americas, Inc. Fluon+™ ETFE C-88AXM HT Blue Concentrate is a blue-colored concentrate designed for use in medium to high-flow ETFE (Ethylene tetrafluoroethylene) for pigmentation. The color concentrate is based on Fluon® ETFE C-88AXM-HT and is supplied in cylindrical pellet form. These pellets are approximately 0.080 inches in diameter by 0.080 inches long. It finds applications in colored injection-molded parts, film, tubing, colored wire or jacket insulation where a pigmented appearance is required.

AGC Chemicals Americas, Inc. Fluon+™ FP-E-93000 XL NATURAL LF contains a crosslinking promoter in an ETFE (ethylene tetrafluoroethylene) polymer matrix. This cross-linkable compound is based on Fluon® ETFE and is supplied in cylindrical pellet form, approximately 3.2 mm in length by 2.0 mm in diameter.

AGC Chemicals Americas, Inc. Fluon+™ FEP 102 Blue Concentrates are blue-colored concentrates designed for use in high-flow FEP (fluorinated ethylene propylene) for pigmentation. The color concentrates are based on Neoflon® FEP NP-102 and are supplied in cylindrical pellet form. These pellets are approximately 0.080 inches long by 0.080 inches in diameter. It finds applications in colored injection-molded parts, film, tubing, colored wire or jacket insulation where a pigmented appearance is required.

AGC Chemicals Americas, Inc. Fluon+™ PFA 3000 Violet Concentrate is a violet-colored concentrate designed for use in high-flow PFA (Perfluoroalkoxy) for pigmentation. The color concentrate is based on Fluon® PFA P-62X and is supplied in cylindrical pellet form. These pellets are approximately 0.080 inches in diameter by 0.080 inches long. It finds applications in colored injection-molded parts, film, tubing, colored wire or jacket insulation where a pigmented appearance is required.

AGC Chemicals Americas, Inc. Fluon+™ E-LaserWrite is a series of concentrates designed for use in wire and cable applications that require written identification via laser marking. Fluon+™ E-LaserWrite can be added to the jacket or insulation resin, along with a standard color concentrate, to allow most constructions to be marked via laser. Fluon+™ E-LaserWrite is based on a variety of fluoropolymer resins and is supplied as a cylindrical pellet.

AGC Chemicals Americas, Inc. Fluon+™ ETFE C-88AXM Violet Concentrate is a violet color concentrate designed for use in medium to high flow ETFE (Ethylene tetrafluoroethylene) for pigmentation. The color concentrate is based on Fluon® ETFE C-88AXM and is supplied in cylindrical pellet form. These pellets are approximately 0.080 inches long by 0.080 inches in diameter. This product finds major applications in colored injection molded parts, film, tubing, colored wire or jacket insulation where a pigmented appearance is required.

AGC Chemicals Americas, Inc. Fluon+™ FEP 108 Green Concentrate is a green-colored concentrate designed for use in high-flow FEP (fluorinated ethylene propylene) for pigmentation. The color concentrate is based on Daikin Neoflon® FEP NP-108 and is supplied in cylindrical pellet form. These pellets are approximately 0.080 inches long by 0.080 inches in diameter. It finds applications in colored injection-molded parts, film, tubing, colored wire or jacket insulation where a pigmented appearance is required.

AGC Chemicals Americas, Inc. Fluon+™ ETFE 7 Blue Concentrate is a blue color concentrate designed for use in low and medium flow ETFE (Ethylene tetrafluoroethylene) for pigmentation. The color concentrate is based on Fluon® C-88A and is supplied in cylindrical pellet form. These pellets are approximately 0.080 inches long by 0.080 inches in diameter. This product finds major applications in colored injection molded parts, film, tubing, colored wire or jacket insulation where a pigmented appearance is required.

AGC Chemicals Americas, Inc. Fluon+™ ETFE C-88AXM HT Red Concentrate is a red-colored concentrate designed for use in medium to high-flow ETFE (Ethylene tetrafluoroethylene) for pigmentation. The color concentrate is based on Fluon® ETFE C-88AXM-HT and is supplied in cylindrical pellet form. These pellets are approximately 0.080 inches in diameter by 0.080 inches long. It finds applications in colored injection-molded parts, film, tubing, colored wire or jacket insulation where a pigmented appearance is required.

AGC Chemicals Americas, Inc. Fluon+™ PFA 2100 Brown Concentrate is a brown color concentrate designed for use in medium flow PFA (Perfluoroalkoxy) for pigmentation. These pellets are approximately 0.080 inches long by 0.080 inches in diameter. It is used in colored injection molded parts, film, tubing, colored wire or jacket insulation where a pigmented appearance is required.

AGC Chemicals Americas, Inc. Fluon+™ mPPS SB-1010 is a modified PEEK (polyether ether ketone) resin that has been improved using AGC's proprietary fluoropolymer and compounding technology. The modification enhances the impact and wear resistance of the PEEK resin, as well as improves its physical and electrical properties. Fluon+™ mPPS SB-1010 can be processed using conventional PEEK molding methods such as extrusion or injection molding. Potential applications include hoses or tubes, wire and cable, gears, seals, or other markets that require high temperature and chemical resistance.

AGC Chemicals Americas, Inc. Fluon+™ ETFE C-88AXM Brown Concentrate is a brown color concentrate designed for use in medium to high flow ETFE (Ethylene tetrafluoroethylene) for pigmentation. The color concentrate is based on Fluon® ETFE C-88AXM and is supplied in cylindrical pellet form. These pellets are approximately 0.080 inches long by 0.080 inches in diameter. This product finds major applications in colored injection molded parts, film, tubing, colored wire or jacket insulation where a pigmented appearance is required.

AGC Chemicals Americas, Inc. Fluon+™ FEP 102 Gray Concentrates are gray-colored concentrates designed for use in high-flow FEP (fluorinated ethylene propylene) for pigmentation. The color concentrates are based on Neoflon® FEP NP-102 and are supplied in cylindrical pellet form. These pellets are approximately 0.080 inches long by 0.080 inches in diameter. It finds applications in colored injection-molded parts, film, tubing, colored wire or jacket insulation where a pigmented appearance is required.

AGC Chemicals Americas, Inc. Fluon+™ High Flow FXM1-9494 Concentrate is a nucleating agent designed for use in the gas injection extrusion process. It contains a well-dispersed nucleating agent that acts as a site for foaming during the gas injection extrusion process. The concentrate is based on Chemours Teflon® FEP (Fluorinated ethylene propylene) and is supplied in cylindrical pellet form, approximately 0.125 inches long by 0.080 inches in diameter.

AGC Chemicals Americas, Inc. Fluon+™ FP-EC-150 (464120042) is a conductive ETFE product that is designed for use in wire and cable applications. Carbon black is added at high concentrations for conductivity and to improve certain physical properties of ETFE. This compound is supplied in cylindrical pellet form and the pellets are approximately 0.125” in length by 0.085” in diameter.

AGC Chemicals Americas, Inc. Fluon+™ FEP 9800 White Concentrate is a white-colored concentrate designed for use in high-flow FEP (Fluorinated ethylene propylene) for pigmentation. The color concentrate is based on Chemours Teflon® FEP TE-9494 and is supplied in cylindrical pellet form. These pellets are approximately 0.080 inches in diameter by 0.080 inches long. It finds applications in colored injection-molded parts, film, tubing, colored wire or jacket insulation where a pigmented appearance is required.

AGC Chemicals Americas, Inc. Fluon+™ ETFE C-88AXM HT Green Concentrate is a green-colored concentrate designed for use in medium to high-flow ETFE (Ethylene tetrafluoroethylene) for pigmentation. The color concentrate is based on Fluon® ETFE C-88AXM-HT and is supplied in cylindrical pellet form. These pellets are approximately 0.080 inches in diameter by 0.080 inches long. It finds applications in colored injection-molded parts, film, tubing, colored wire or jacket insulation where a pigmented appearance is required.

AGC Chemicals Americas, Inc. Fluon+™ PVDF Red 9 Concentrates are red-colored concentrates designed for use in PVDF (Polyvinylidene fluoride) for pigmentation. The color concentrates are based on Arkema Kynar® PVDF 2850-04 and are supplied in cylindrical pellet form. These pellets are approximately 0.080 inches in diameter by 0.080 inches long. It finds applications in colored injection-molded parts, film, tubing, colored wire or jacket insulation where a pigmented appearance is required.

AGC Chemicals Americas, Inc. Fluon+™ PFA 3000 Red Concentrate is a red-colored concentrate designed for use in high-flow PFA (Perfluoroalkoxy) for pigmentation. The color concentrate is based on Fluon® PFA P-62X and is supplied in cylindrical pellet form. These pellets are approximately 0.080 inches in diameter by 0.080 inches long. It finds applications in colored injection-molded parts, film, tubing, colored wire or jacket insulation where a pigmented appearance is required.

AGC Chemicals Americas, Inc. Fluon+™ ETFE C-88AXM HT Black Concentrate is a black-colored concentrate designed for use in medium to high-flow ETFE (Ethylene tetrafluoroethylene) for pigmentation. The color concentrate is based on Fluon® ETFE C-88AXM-HT and is supplied in cylindrical pellet form. These pellets are approximately 0.080 inches in diameter by 0.080 inches long. It finds applications in colored injection-molded parts, film, tubing, colored wire or jacket insulation where a pigmented appearance is required.

AGC Chemicals Americas, Inc. Fluon+™ FEP 9400 Green Concentrate is a green-colored concentrate designed for use in high-flow FEP (Fluorinated ethylene propylene) for pigmentation. The color concentrate is based on Chemours Teflon® FEP TE-9494 and is supplied in cylindrical pellet form. These pellets are approximately 0.080 inches in diameter by 0.080 inches long. It finds applications in colored injection-molded parts, film, tubing, colored wire or jacket insulation where a pigmented appearance is required.

AGC Chemicals Americas, Inc. Fluon® ETFE C-88AXP is a melt-processable copolymer of tetrafluoroethylene and ethylene that offers a unique combination of properties such as high resistance to heat and chemical attack and exceptional physical toughness. It can be processed using conventional methods like extrusion, injection molding, rotomolding, rotolining, and electrostatic coating and is available in the form of 1/8 inch pellets.