Knowde Enhanced TDS
Identification & Functionality
- Chemical Family
- Plastics & Elastomers Functions
- Technologies
- Product Families
- Composition
Proprietary resin emulsion of polyolefins and organic fatty acids in combination with wetting agents and surfactant in a water vehicle.
Applications & Uses
- Applications
- Compatible Polymers & Resins
- Recommended Uses
- Polyester
- Epoxy
- Rubber
- Melamine & Phenolic
- Application Method
Clean mold with CleanWiz. Apply mold release with a clean cotton cloth wiping in two directions, using a circular motion. Allow to dry for five minutes and hand polish to a smooth finish, wiping straight in two directions. May also be applied by spraying a thin coat (fine mist to dry film) and allowing to dry completely with no moisture residue. Accelerate drying time by blowing hot air or by using heat lamps. Repeat whenever mold has been cleaned with CleanWiz, or as required to give mold release properties.
Properties
- Typical Properties
| Value | Units | Test Method / Conditions | |
| Flash Point | Non-Flammable | °F/°C | - |
| pH | 9.5 – 11.5 | - | - |
| Solids | 10 – 12 | % | - |
| Specific Gravity (25°C) | 0.99 | - | - |
| Viscosity at 25°C | max. 15 | cPs | - |
| VOC & HAPs (25 °C) | 0.0 | % | - |
Regulatory & Compliance
- Certifications & Compliance
Packaging & Availability
- Country Availability
- Regional Availability