Knowde Enhanced TDS
Identification & Functionality
- Chemical Family
- Plastics & Elastomers Functions
- Technologies
- Product Families
- Composition
A proprietary synergistic blend of organic fatty acids, esters and amine neutralizing agents.
Applications & Uses
- Markets
- Compatible Polymers & Resins
- Plastics & Elastomers Processing Methods
- Recommended Uses
For pultrusion of polyester, vinyl ester, and hybrid resin systems including acrylate and urethane modified resins. Especially suitable for hybrid resins, including Modar® and for systems which incorporate high loadings of fillers, particularly ATH.
- Application Method
For best results, laboratory tests or pre-production trials should determine the optimum addition level. Typical addition level in polyester or vinyl pultrusion is 10-15 parts/1000 by weight (1% - 1.5%)by resin weight (excluding fillers), although small or simple profiles geometry may be achieved with lower addition. High amounts of filler and/or hybrid resin systems may require higher addition levels (30 parts/1000 or 3%.
Mixing:
For two-part thermoset resins, mix the process aid additive in the less viscous or less reactive side of the resin system. Add prior to the addition of any catalysts.
Properties
- Physical Form
- Typical Properties
Value | Units | Test Method / Conditions | |
Effective Ingredients | 100.0 | % | - |
pH | 4.6 | - | - |
Specific Gravity (25°C) | 0.974 | - | - |
Viscosity at 25°C | 240.0 | cPs | - |
Regulatory & Compliance
- Certifications & Compliance
Storage & Handling
- Handling and Shelf Life
- Keep container closed when not in use.
- Store above freezing and below 100ºF / 38ºC.
- DO NOT DILUTE
- Shelf Life : 1 yr. minimum in original closed container