Products

Glucopon® 215 UP is a short-chain APG sold as a liquid of 63.5% concentration. This mid-chain APG surfactant has moderate hydrotropic ability and high foam, providing good primary cleaning. It is 100% derived from renewable resources and is used as a mild degreaser and foaming/stabilizing surfactant that won't damage even floor finishes. It has excellent gloss retention and plastic compatibility, and contains no biocide for preservation. It is listed on the EPA’s Safer Chemical Ingredients List and is approved for direct release to the environment.

Kollicoat® MAE 100-55 is a white redispersible powder with a faint characteristic odor. The product contains 0.7% sodium lauryl sulfate (USP) and 2.3% Polysorbate 80 (Ph. Eur.) as emulsifying agents. The fatty acids used in the manufacture of Polysorbate 80 are of vegetable origin. Kollicoat® MAE 100-55 is a weakly acidic copolymer that dissolves at a pH above 5.5. Kollicoat® MAE 100-55 dissolves in methanol and ethanol to yield clear to slightly cloudy solutions. It is also soluble in dilute alkaline solutions.

Plantacare® 818 UP is a mild, non-ionic surfactant that is suitable for use as a base surfactant or co-surfactant in cosmetic cleansing preparations. It is a cloudy, viscous aqueous solution of a C8-C16 fatty alcohol glycoside. Applications include skin care, hair care, and oral care.

PatcH2O® A00297 is a powerful ‘anti-thirst’ moisturizing ingredient that provides intense, prolonged hydration that rejuvenates and smooths skin. It's an instant relief that sticks around, increasing skin hydration from 30 minutes after application to up to 5 days after application. The biopolymer network is enriched with a highly concentrated moisturizing complex.

Phytosoothe® LS 9766 helps to protect the skin barrier, which is essential for the body's defense against the environment. The stratum corneum's lipids and structural elements create a physical barrier, while microorganisms on the skin surface and deeper layers form the microbiotic barrier, which defends against pathogens. However, both barriers are vulnerable to damage from environmental factors. Phytosoothe® LS 9766 accelerates the skin's natural recovery after impairment, supporting a healthy microflora, increasing hydration, and reducing trans-epidermal water loss.

Plantaren® 810 UP is a non-ionic surfactant made from 100% renewable, plant-derived feedstocks. This product is RSPO-MB-certified sustainable. It has first-rate environmental and skin compatibility profiles, creating a perfect synergy of mildness, foam performance, and effective cleansing. Due to its invaluable mildness, this surfactant is a perfect fit for sensitive skin and baby cleansing concepts.

Lamesoft® PO 65 is preferably used as a lipid layer enhancer for the production of surfactant cleansing preparations. On account of its viscosity-increasing properties, Lamesoft® PO 65 contributes to the viscosity formation in cosmetic cleansing preparations such as shower gels, foam baths, shampoos, and baby products.

Sanicapyl® is a natural complex made with an extract of Piper nigrum berries (black pepper) titrated in piperine, an extract of Inga alba bark, and sodium lauryl lactylate. It has soothing anti-irritation properties and provides a purifying cleanse to the skin that helps in the recovery of damaged skin. Additionally, it is suitable for all hair types and improves the appearance of hair radiance and sensorial properties.

Plantacare® 810 UP is a nonionic surfactant with excellent solubilizing properties, making it ideal for use in a range of cosmetic cleansing preparations. It is commonly used in personal care products such as shower gels, shampoos, and mouthwashes. Plantacare® 810 UP is well-suited for use in formulations intended for skin care, hair care, and oral care, making it a versatile ingredient in the cosmetics industry.

Plantaren® 818 UP is a unique class of non-ionic surfactants obtained from renewable, plant-derived raw materials. It boasts excellent environmental and skin compatibility profiles, creating a perfect synergy of mildness, foaming performance, and effective cleansing. It is made from 100% natural, renewable, plant-derived feedstocks.

Sulfopon® 1216 G is a sodium coco-sulfate that has convenient handling, good storage stability and flowability, high bulk density, and good detergency. It is suited as a basic surfactant in cosmetic cleansing preparations such as shampoos, shower gels, and bath preparations.

Emulgade® CM is a liquid emulsion concentration for the preparation of creams and lotions. This product is especially suitable for wet wipes. It is easy to handle and is suitable for simple cold processing to achieve low- to medium-viscous O/W emulsions.

Plantapon® LC 7 is an anionic surfactant that is suitable for use in a range of personal care cleansing products, including mild shampoos, shower and bath preparations, facial washes, and cleansing wipes. It is particularly well-suited for use in formulations intended for skin care and hair care.

SPHINGOCERYL® VEG LS 9948 is an active ingredient suitable for skin and hair care applications. It is a combination of phytoceramides, glycolipids, and phospholipids derived from sunflower. The recommended dose of use is 1-2%. This active ingredient can be used in after-sun and sun protection products, body care, face care, conditioning, and shampoo products.

Texapon® K-30 UP is an anionic surfactant that appears as a slightly yellow liquid to slightly pasty substance with a concentration of approximately 29%. It has the ability to generate a very high initial foam and does not contain any preservatives. It is commonly used in the formulation of shampoos, shower and bath preparations, and skin cleansers.

Cetiol® CC is an innovative, fast-spreading, dry emollient that can significantly improve the sensory performance of the final formulation. Its ability to dissolve crystalline UV filters and disperse pigments makes it particularly suitable for sun care products. Cetiol® CC is also suitable for use in aerosols, as it effectively dissolves perfume and propellants, with applications specifically including body care, face care, antiperspirants/deodorants, baby care and sun care.

Lanette® SX is a cream base for cosmetic oil-in-water emulsions used for skin and hair care. It is self-emulsifying and anionic in nature, and is an alternative to stearate-based cream bases. It is composed of a mixture of cetylstearyl alcohol and an anionic emulsifier, and appears as white pellets with a faint intrinsic odor.

Hydagen® Aquaporin is made of highly concentrated glyceryl glucoside. One of the fundamental processes of life is the transportation of water molecules through the surface layer of the cells. The structure of these channels was clarified in the 1990s, and the corresponding proteins were named aquaporins. The discovery of these water canals was awarded with the Nobel Prize in chemistry in 2003. BASF now makes one of the best-known aquaporin-supporting substances available to the broad cosmetic market. Clinical studies show that Hydagen® Aquaporin boosts the moisturizing capacity of glycerin for instant and 24-hour hydration.

Dehypon® LS 36 is a low foaming non-ionic surfactant with a cloud point of 10°C. It is excellent for extraction cleaning and suitable for low temperature cleaning (Less than or equal to 45°C). The product exhibits good performance for cleaning and foam control.

Plantacare® 1200 UP is a nonionic surfactant with good dermatological compatibility and viscosity-enhancing effects. It is therefore suitable for use as an additive or a co-surfactant in cosmetic surfactant cleansing preparations. It is a cloudy, viscous, aqueous solution of a C12 - C16 fatty alcohol polyglycolide.

Dehymuls® PGPH is used as a water-in-oil emulsifier for the preparation of low-viscous water-in-oil emulsions. In combination with Lameform® TGI and/or Monomuls® 90-O 18, W/O creams can be formulated that contain greater fractions of high molecular oils, e.g., vegetable oils. It is a yellow, turbid, opaque, and viscous liquid with a slightly fatty characteristic odor. Dehymuls® PGPH is flexible in use with ethanol and emollients, independent of emollients, and cold-processable.

Plantacare® 2000 UP is a non-ionic surfactant made from 100% renewable, plant-derived feedstocks and is RSPO-MB certified sustainable. This product has first-rate environmental and skin compatibility profiles which help in creating perfect synergy of mildness, foam performance and effective cleansing.

Texapon® SFA UP Powder is an innovative, very mild anionic surfactant suitable for solid, zero-waste rinse-off products and solutions not containing EO. Texapon SFA UP Powder is RSPO mass balanced and 100% natural origin according to ISO 16128. It provides excellent conditioning on hair, great skin compatibility, and a rich and creamy foam.

Emulgade® 1000 NI is a universal, self-emulsifying non-ionic cream base suitable for many skin and hair care applications. It is compatible with anionic and cationic ingredients, and is excellent for creating O/W emulsions containing difficult-to-emulsify actives. This flexible, easy and cost-efficient self-emulsifying O/W cream base is a great choice for formulators.

Euperlan® OP White is a wax-based, readily biodegradable, and cold-processable opacifier. It creates a luxurious, pure white look for your skin and hair cleansing formulations, meeting the demand for ecologically friendly products and conforming to major eco-labels. The excellent anti-hair breakage and conditioning performance of Euperlan® OP White will help you design your next generation of creamy white, high-performance shampoos that are better for both perfectly healthy hair and the environment.

Dehypon® LS 24 is a low-foaming non-ionic surfactant. It is an EO/PO derivative used for detergents and cleaners in which foaming has to be kept to a minimum. It appears as a yellowish liquid, clear to slightly cloudy at room temperature.

Argassential® BC 9959 helps by improving the look and feel of the skin’s elasticity, firming, lifting, and volumizing the lips and cheeks. Now more than ever, today’s cosmetics seek to sculpt the eyes, nose, lips, and cheeks for an attractive and striking effect.

Plantasil® 4V is a conditioning booster. It provides significant improvements on wet combing and sensorial performance in different hair types. It also has high combing force reduction even at higher levels of hair damage. This product allows the formulation of high-conditioning shampoos, even with low surfactant content.

Tinovis® GTC UP is a rheology modifier for clear gel systems and an aqueous anionic acrylic copolymer emulsion. It offers good emulsifying properties with thickening features and electrolyte tolerance. With its good sensorial properties, it delivers a soft, silky, and smooth after-feel, and provides a combination of care and an elegant feel in emulsions. It is free of preservatives and can be used in cold processable formulations.

Good performance for cleaning and foam control. Suitable for high-temperature cleaning (greater than 60°C). The cloud point is 30°C, so it has very low foaming above that temperature, which is ideal for carpet extraction operating temperatures (typically 35 to 50°C). Listed on the EPA's Safer Chemical Ingredients List, it is a low-foaming fatty alcohol EO/PO derivative.

Dehydol® 100 Liquid 90% is an alkyl polyethylene glycol ether made from C12–C18 alcohol and contains 9 moles of ethylene oxide. It is 90% active and available as a liquid at room temperature, with a cloud point of 80°C. Due to its wetting and emulsifying power, it's used in all kinds of household and institutional cleaners.

Plantapon® AF is a surfactant composition blend that is ideal for use in the preparation of bath and shower oils, as well as water-free body cleansing products. This ingredient has lipid layer enhancing properties. Plantapon® AF provides a range of benefits for skin care, including moisturization, particularly appealing for those with sensitive skin.

Hyalufix® GL is a bioactive substance that offers an entirely new approach to the use of hyaluronic acid by assisting the skin’s natural formation of hyaluronic acid. Hyaluronic acid is a wonder of cosmetics. It naturally hydrates, increases volume, and supports the skin’s natural homeostasis process, making it a key substance to counteract signs of aging. This product is extracted from galanga leaves. It significantly reduces the volume of the nasolabial fold, one of the deepest marks of aging, and creates the appearance of a denser, smoother, and more radiant skin.

Glucopon® 225 DK is a 70% liquid short-chain APG available as a hydrotrope. It provides high foam with good primary cleaning, is unbleached and supplied as a dark liquid, and is 100% derived from renewable resources. It is very mild to the skin and can synergistically reduce the skin irritation caused by anionic surfactants while also providing excellent gloss retention with little to no streaking and excellent plastic compatibility. It is listed on the EPA's Safer Chemical Ingredients List, approved for direct release to the environment, and contains no biocide for preservation.

Demelan® VPC is a thickener for acidic systems that is highly effective on mineral acids, has shown excellent primary cleaning on certain soils, and mixes into solution up to three times faster than other competitive thickeners, providing improved processing time. It is also compatible with all types of anionic, cationic, and amphoteric surfactants.

Plantapon® LGC Sorb is an anionic surfactant that combines the characteristic mildness of APG® with excellent foaming and sensory properties, making it especially suitable for use in mild rinse-off applications. Applications for this product include body wash, face wash, liquid hand soap, shampoo, baby care, and sensitive skin care. This product has an active matter of 28.5-34.0%, a pH value of 5.5-6.5%, and a water content of 62.0-67.0%.