Knowde Enhanced TDS
Identification & Functionality
- Chemical Family
- CASE Ingredients Functions
- Technologies
Features & Benefits
- CASE Ingredients Features
- Product Highlights
- High Heat Distortion Temperature
- Rapid Cure Speed
- Impact Resistance
- Low Skin Irritation
- Good Toughness
- Enhances Weatherability
- High Temperature Stability
- Low Shrinkage
Applications & Uses
- Applications
- Compatible Substrates & Surfaces
- Base Chemicals End Uses
- Ink & Toner Type
- Recommended Application
- 3D Printing Inks & Resins
- Wood Floor Coatings
- Furniture Coatings
- Inkjet
Properties
- Uncured Properties
Value | Units | Test Method / Conditions | |
Pt-Co Color (APHA) | 55 | — | — |
Pt-Co Color | 55 | APHA | — |
Refractive Index (25°C) | 1.51 | — | — |
Viscosity (60°C) | 7,725 | cP | — |
Density (25°C) | 1.106 | g/cm3 | — |
Technical Details & Test Data
- Typical Formulations
Test Formulation Name I30 I50 TP50 TM50 H50 HE30 BR-930D
70 50 50 50 50 70 IBOA 30 50 TMPTA 50 TPGDA 50 HDDA 50 HEMA 30 Irgacure® 184
2 2 2 2 2 2 Viscosity, 25°C (CAP2000+) 4,400
440 2,600 470 180 1,200 * Brookfield – CAP 2000+ @ 25°C.
Cured Mechanical Properties
Property I30 I50 TP50 TM50 H50 HE30 Tensile Strength, (psi, ASTM D882) 5.012
4.740
4.092
4.165
4.213
4.692 Elongation (%, ASTM D882) 4.9 3.39 5.38 1.89 3.36 5.59 Elastic Modulus (ksi, ASTM D882) 215
213
201
263
182
219 Durometer Hardness 87D
86D 92D
92D 85D 86D
Water Absorption, %(24 hrs)
0.22 0.18 0.36 0.35 0.27 1.29 MEK Double Rubs (#) 20 9 >200 >200 >200 >200 Tg(DMA) = 95°C; Peak tan delta; HDT= 86°C @ 66 psi (DMA) ** Per ASTM D882 – Not Tested || Incompatible X Unable to Measure
Adhesion Properties
Substrate I30 I50 TP50 TM50 H50 HE30 Aluminum XX X XXX Cold Rolled Steel X XX X X XXX Glass X XXX XXX HDPE PET X XX XX XX XXX PMMA XXX X XX XXX Polycarbonate XX XXX XXX XXX XXX XXX Stainless Steel X XX XX XX X - Recommended, XX - Highly Recommended, XXX - Strongly Recommended
- Viscosity Reduction with Reactive Diluents
Safety & Health
- General Information
This product is intended for industrial use only. Keep out of the reach of children. Avoid breathing vapors. Avoid contact with skin, eyes, and clothing. Wear impervious gloves. Repeated or continuous skin contact with uncured material may cause irritation. Remove material from skin with soap and water. Never use organic solvents to remove material from skin and eyes. For more information on the safe handling of this material, please refer to the Safety Data Sheet before use.