Knowde Enhanced TDS
Identification & Functionality
- Chemical Family
- Base Chemicals Functions
- CASE Ingredients Functions
- Technologies
Features & Benefits
- Labeling Claims
- CASE Ingredients Features
- Product Highlights
- Fast curing
- High gloss
- Low in color
- Tin-free
- Provides toughness and high tensile strength
- Low viscosity
- Low MeHQ content
- High Tg and HDT
Applications & Uses
- Base Chemicals End Uses
- Recommended Application
- Predominant resin for nail coatings
- Scratch resistant coatings
- Light curable dental composite resins
- Rigid 3D printing resin
Properties
- Uncured Properties
| Value | Units | Test Method / Conditions | |
| Pt-Co Color | 10 | APHA | — |
| Refractive Index (25°C) | 1.480 | — | — |
| Viscosity (25°C) | 7,200 | cP | — |
| Density (25°C) | 1.100 | g/cm3 | — |
Technical Details & Test Data
- Typical Formulations
Typical Formulations Test Formulation Name 130 150 TM50 TP50 H50 HE30 BR-742M 70 50 50 50 50 70 IBOA 30 50 TMPTA 50 TPGDA 50 HDDA 50 HEMA 30 Omnirad 184 2 2 2 2 2 2 Viscosity, 25°C* 450 100 600 130 50 190 * Brookfield – CAP 2000+ @ 25°C.
Cured Mechanical Properties Property I30 I50 TM50 TP50 H50 HE30 Tensile Strength, psi**
11,000 9,200 8,300 9,600 7,800 11,000 Elongation, 6** 5.4 5.4 2 4 3 6 Elastic Modulus, ksi*
380 360 440 390 320 430 Durometer Hardness
89D 88D 94D 89D 89D 90D Water Absorption, 96 (24 hrs)
0.23 0.2 0.34 0.37 0.28 1 MEK Double Rubs (#)
>200 >200 >200 >200 >200 >200 Tg(DMA)=153°C; Peak tan delta; cured with 2 phr of Omnirad® 184 ** Per ASTM D882 – Not Tested || Incompatible X Unable to Measure
Adhesion Properties
Substrate I30 I50 TM50 TP50 H50 HE30 ABS X XXX X XXX XX Aluminum Cold Rolled Steel Glass HDPE PET X XX XX XX XXX XXX PMMA X XXX XX XX XX Polycarbonate XXX X XXX PVC X XXX X XXX Stainless Steel X - Recommended, XX - Highly Recommended, XXX - Strongly Recommended
- Viscosity Reduction with Reactive Diluents
Safety & Health
- Safety Information
This product is intended for industrial use only. Keep out of the reach of children. Avoid breathing vapors. Avoid contact with skin, eyes, and clothing. Wear impervious gloves. Repeated or continuous skin contact with uncured material may cause irritation. Remove material from skin with soap and water. Never use organic solvents to remove material from skin and eyes.