Knowde Enhanced TDS
Identification & Functionality
- Chemical Family
- CASE Ingredients Functions
- Technologies
Features & Benefits
- CASE Ingredients Features
- Features
- Very low viscosity
- High modulus
- Improved HDT vs BR-970BT
- Hydrolytic stability
- Rapid cure
- Non-yellowing
- Abrasion and chemical resistance
- Stain resistance
Applications & Uses
- Applications
- Compatible Substrates & Surfaces
- Base Chemicals End Uses
- Ink & Toner Type
- Recommended Applications
- Inkjet printing
- Graphic Arts
- Electronics
- Automotive
Properties
- Uncured Properties
| Value | Units | Test Method / Conditions | |
| Density (25 °C) | 1.2 | g/cm3 | — |
| Pt-Co(APHA) Color | 66 | — | — |
| Pt-Co Color | 66 | APHA | — |
| Refractive Index (25°C) | 1.49 | — | — |
| Viscosity (25 °C) | 24000 | cP | — |
Technical Details & Test Data
- Typical Formulations
Test FormulationName I30 I50 TP50 TM50 H50 HE30 BR-970H 70 50 50 50 50 70 IBOA 30 50 TMPTA 50 TPGDA 50 HDDA 50 HEMA 30 Irgacure ® 184 2 2 2 2 2 2 Viscosity, cP 25°C 1,400 260 280 1,300 120 100 Cured Mechanical Properties :
Property I30 I50 TP50 TM50 H50 HE30 Tensile Strength, psi 4,578 5,354 3,855 6,381 4,681 3,433 Elongation, % 6.5 4.5 11 3.3 5.2 10 Elastic Modulus, ksi 211 222 201 278 179 195 Durometer Hardness 83D 84D 84D 90D 83D 82D Water Absorption, % (24 hrs) 0.26 0.20 0.39 0.35 0.31 1.39 MEK Double Rubs (#) 34 15 154 >200 >200 40 T g =70°C(DMA); Peak on delta; HDT= 44°C @ 66 psi (DMA). Adhesion Properties :
Substrate I30 I50 TP50 TM50 H50 HE30 Cold Rolled Steel X XX Glass X XXX PET X X X XX X XX PMMA Polycarbonate XXX XXX XXX XXX XXX XX Stainless Steel X X X X XXX X Recommended XX Highly Recommended XXX Strongly Recommended
- Viscosity Reduction with Reactive Diluents
Safety & Health
- General Information
This product is intended for industrial use only. Keep out of the reach of children. Avoid breathing vapors. Avoid contact with skin, eyes, and clothing. Wear impervious gloves. Repeated or continuous skin contact with uncured material may cause irritation. Remove material from skin with soap and water. Never use organic solvents to remove material from skin and eyes. For more information on the safe handling of this material, please refer to the Safety Data Sheet before use.