Knowde Enhanced TDS
Identification & Functionality
- Chemical Family
- Product Type
- Technologies
- Product Families
Features & Benefits
- Ready-to-Use Product Features
Applications & Uses
- Applications
- Cure Method
- Applications
APPLICATION
Check the work life of the adhesive, on the technical data sheet. Adhesives must be used within its work life .Ihe adhesives properties will change it it is used past the allowable work lite. Apply adhesive using dispensing equipment of choice.
CURE
Choose a Cure Option (time & temperature) from the Bondline technical data sheet. Preheat the oven to the temperature of the selected cure option. For optimum cure, do not deviate from the selected cure option. Be sure to allow additional time for holding fixtures to reach cure temperature. Avoid opening oven doors during cure. Large fixtures and/or multiple fixtures may require extended cure time.
Properties
- Adhesive Properties
| Value | Units | Test Method / Conditions | |
| Viscosity | 4000.0 | cps | — |
| Work Life (25°C) | 8.0 | hours | — |
| Hardness | 35.0 | Shore D | — |
| Cure Options (120°C) | 1.0 | hours | — |
| Cure Options (96°C) | 2.0 | hours | — |
| Cure Options (25°C) | 48.0 | hours | — |
| Service Temperature Range | 55 to 150 | °C | — |
| Lap Shear Strength (25°C, Al to Al ) | 4000.0 | psi | — |
| Specific Gravity | 1.15 | — | — |
| Glass Transition Temperature (Tg) | 82.0 | °C | — |
| Volume Resistivity | 20 x 10¹⁴ | ohm cm | — |
| Dielectric Strength | 600.0 | volts/ mil | — |
| Tensile Modulus | 392000.0 | p.s.i. | — |
| Coefficient of Thermal Expansion (Below Tg) | 65 x 10⁻⁶ | in/in/°C | — |
| Coefficient of Thermal Expansion (Above Tg) | 168 x10⁻⁶ | in/in/°C | — |
| Thermal Conductivity | 0.14 | Btu ft-1 hr-1° F-1 | — |
| Weight Loss (105°C) | 0.014 | % | — |
Safety & Health
- Safety
Always wear protective gloves and goggles while handling adhesives. Only work with adhesives in well-ventilated areas, with curing ovens vented outside. For industrial use only.
Packaging & Availability
- Availability
Net volume lcc to 5cc, available in disposable 3ce &5cc syringes.
Storage & Handling
- Shelf Life
- 12 (-40°C or Colder)
- Storage & Handling
GENERAL INSTRUCTIONS FOR ADHESIVE STORAGE/ USE
FROZEN STORAGE
This adhesive must be stored at (minus) –40°C (°F) or colder at all times. Storing this adhesive at temperatures warmer than (minus) –40°C (°F) will shorten its work life.
DO NOT RE-FREEZE adhesive that has already been thawed
THAWING PROCESS
Remove frozen syringe from freezer. Place in vertical position with lure lock end pointed down during thaw. Adhesive must reach room temperature before use. See chart below based on syringe size.
SYRINGE SIZE THAW TIME 1cc 5 minutes 3cc 10 minutes 5cc 15 minutes 10cc 20 minutes