Knowde Enhanced TDS
Identification & Functionality
- Chemical Family
- CASE Ingredients Functions
- Technologies
Features & Benefits
- Labeling Claims
- Product Highlights
- It's a new environmental-friendly technology to produce enamel paints which meet VOC requirement in REACH 2010
- It's a system of incorporating water into enamel paints up to 35% in a process called Alkyd Emulsifica-
- This system can reduce the total cost of enamel paints up to 20%
- It's a blend of experience and knowledge designed to meet the market needs
- The final product is still solvent base as it diluted with aliphatic and aromatic solvents
- Chemical Partners experts can help you in formulating and implementing the technology to give you the maximum benefits in cost savings and performance.
Applications & Uses
- Applications
- Coating Type
Regulatory & Compliance
- Certifications & Compliance
Technical Details & Test Data
- Guide Formula For Emulsion Intermediate and Stability Test
# Raw Materials Function Quantity 1 Chempart 20/55 LRSC 70 % Resin 17% 2 White Spirit Solvent 16% 3 Defoaming agent Defoaming agent 0.5% 4 Chempart SC100 Polysaccharide 7% 5 Water Solvent 59.5% 6 Total 100% - Required definite mixer speed < 20 M/S (1500-2000 rpm).
- Definite rate of water addition (60-100 L/M).
- Mixing time for 35 min.
Stability Tests
- Heat Stability Test
- The test done by putting sample of Emulsion Intermediate in the oven at 60 C for 48h.
- Check the sample, if there's any syneresis or not, if not the sample is OK
- Viscosity Test
- Viscosity measured by KU at 25°C must be in the range of 90-95 KU
- Measured by stormer or equivalent method
The Formula of white enamel as the following:
# Raw Materials Function Quantity Results 1 Chempart 20/5S LRSC 70% Resin 35.5% Gloss:90.600
Density:0.989/1
Viscosity:480CP
Drying time:
Touch 1.5h
Through Drying 3h2 White Spirit Solvent 4.24% 3 Ca 10% Driers 0.53% 4 Bentone SD-1 Rheological Additives 0.25% 5 Dispersing agent Dispersing agent 0.25% 6 TiO2 Pigment 20% Mix well for 15 Min. to give finest 30 micron then add the following ingredient: 7 Chempart SCM 150 Emulsion Intermediate ED 38.07% Mix well for 15 Min. to give finest 30 micron then add the following ingredient: 8 Co 10% Driers 0.3% 9 Zr 12% Driers 0.45% 10 Exkin 2 Anti skining agent 0.4% 11 Tint Ayd AL 234 Toner 0.01% Total 100%