J-Cut

J-CUT 450 is a heavily additized, high performance oil developed for use in difficult machining operations such as helical broaching. J-CUT 450 contains an oiliness additive for additional performance, especially on draggy, soft metals.

J-Cut 21 is a premium quality multi-purpose, non-staining product formulated with a chlorinated performance additive. J-Cut 21 also contains an oiliness additive for additional performance, especially on draggy, soft metals. It gives excellent performance on high speed heavy duty operations on most types of steels and non-ferrous metals. This product can also be used as gear oil, hydraulic oil, and general machine oil.

J-Cut 55 QT is a heavy duty dark cutting oil developed for difficult machining operations such as deep hole boring, gun drilling and trepanning. Extensive field experience has shown that J-Cut 55 QT gives exceptional production rates and extended tool life. The viscosity is designed to give maximum lubrication combined with the proper cooling and flushing of chips. J-Cut 55 QT does contain active sulfur and should not be used on non-ferrous metals because of staining.

J-Cut 9187 was specifically developed for Swiss type high performance screw machines. The low viscosity of J-Cut 9187 allows it to effectively penetrate between the tool and work piece interface providing excellent surface finishes and tool life. This product is extremely high performance and is easily capable of performing gun drilling and form tapping on stainless as well as carbon steel.

J-Cut 5542 was developed to meet the demands generated by high performance screw machines. J-Cut 5542 effectively penetrates the tool and work piece interface providing excellent surface finishes and tool life. This product is extremely high performance and is easily capable of performing gun drilling and form tapping on stainless and other difficult to machine alloys without the use of additional additives.

J-Cut NCL-20 is a heavy duty cutting oil developed to machine difficult metals without the need for chlorinated additives. The extreme pressure lubricants are balanced to provide ease of cut with minimal tool wear. An effective anti-mist additive is incorporated into the J-Cut NCL-20 to reduce misting of the cutting oil during high speed machining operations.

J-Cut NCL-18 is a moderate to heavy duty dual purpose cutting oil developed to machine a wide variety of metals without the need for chlorinated additives. The extreme pressure lubricants are balanced to provide ease of cut with minimal tool wear. An effective anti-mist additive is incorporated into the J-Cut NCL-18 to reduce misting of the cutting oil during high speed machining operations.

J-Cut 4560 is a high performance cutting oil designed for mist and spray lubricators. The non-chlorinated lubricants provide excellent surface finishes on even the most difficult metals without staining.

J-Cut MO-240-EP is a heavy duty lubricant formulated for the machining and sawing of ferrous and non-ferrous metals. The high film strength of J-Cut MO-240-EP in conjunction with non-chlorinated extreme pressure additives, provides excellent performance on difficult to machine alloys such as stainless steel and exotic alloys. Based on renewable resources, J-Cut MO-240-EP is biodegradable and essentially non-toxic.

J-Cut MO-250-EP is a heavy duty lubricant formulated for the machining and sawing of ferrous and some non-ferrous metals. The high film strength of J-Cut MO-250-EP in conjunction with non-chlorinated extreme pressure additives, provides excellent performance on difficult to machine alloys such as stainless steel and exotic alloys. Based on renewable resources, J-Cut MO-250-EP is biodegradable and essentially non-toxic.