Products

Aminol possesses excellent pH development and reserve alkalinity. Due to the chemical structure of the amine, Aminol will not contribute to ammonia blush.

Vulcut 2000LC is a moderate to heavy duty lubricant formulated for the general machining and sawing of ferrous and non-ferrous metals. The high film strength of Vulcut 2000LC provides excellent lubrication characteristics without the need of chlorine, sulfur or phosphorous based additives. Based on renewable resources, Vulcut 2000LC is biodegradable and essentially non-toxic.

Product D is a specially blended, highly effective, silicone-based anti-foam agent. Using a unique emulsifier system that was designed for metalworking applications, Product D has an extended sump life over other silicone based defoamers. It is used in very small quantities where foaming has become a problem.

Vulgrind 7410 is a chlorine-free high performance grinding oil based on specially selected, thermally stable base oils. This allows Vulgrind 7410 to provide a consistent level of grinding performance as well as ensuring excellent wetting, lubrication and cooling.

Vanishing Oil 6370 is designed for light and medium duty blanking, stamping, very shallow draws and fin forming. The light oily film evaporates in 10 to 20 minutes, depending on the environment, leaving a clean surface. Vanishing Oil 6370 is compatible with all metals including aluminum, copper, stainless steel, brass, mild steel (1010, 1008) and silicone steel alloys.

Vulclean FC-5551 is a non-flammable heavy-duty liquid detergent concentrate designed to be diluted with water for general maintenance cleaning. Vulclean FC-5551 is highly recommended for use in the hand cleaning of soiled shop machinery and, because of its fast drying and low foaming characteristics, it is also recommended for use in mechanical floor scrubbing equipment.

Vulclean SC is a low foaming, safe, concentrated cleaner, formulated for the rapid removal of chips, soils and bio-film in coolant systems. Vulclean SC will provide short-term corrosion protection to freshly cleaned systems. It can be used to clean large central systems as well as individual machine sumps and recycling units.

Oxynul RP-4820 is an oil dispersed rust preventive developed to provide long term protection in corrosive and high humidity environments. Oxynul RP-4820 also provides fingerprint suppression with a self-healing film. The thin oily residual film is easily cleaned using an alkaline cleaner.

A specially blended, highly effective, non-silicone oil-based anti-foam agent. It is used in very small quantities where foaming has become a problem.

Vuldra 8525 is a water soluble drawing and stamping fluid based on vegetable oil technology. It was designed to replace neat oils used to draw and stamp carbon and stainless steel alloys. The unique combination of boundary lubrication and non-chlorinated extreme pressure additives provides excellent surface finishes even in the most demanding operations. Vuldra 8525 is a clean product that is easily removed by both mildly alkaline and alkaline cleaners.

Vulclean SK-2288 is a heavy duty surface cleaner for steel, plastic, brass, copper and aluminum alloys in vibratory and tumbling finishing operations. Vulclean SK-2288 is formulated to quickly penetrate soils and remove them while providing excellent rust protection for up to 90 days storage indoors.

Oxynul RP-1950 is a highly effective all-purpose, water-soluble emulsion cleaner, designed to produce a soil-free surface and excellent medium term rust prevention. Oxynul RP-1950 is especially effective on freshly ground/machined surfaces, zinc phosphate and black oxide coatings.

Oxynul RP-1090 is a true solution rust preventative designed to provide short term indoor storage protection. It is safer and more economical than solvent based rust preventatives.

Vulclean RP-13632 is a moderately alkaline cleaner and corrosion inhibitor engineered to remove shop soils, oils, and coolants from ferrous alloys. Parts cleaned with Vulclean RP-13632 exhibit excellent corrosion protection for indoor storage and covered transport.

Vuldra 6412 is a water soluble drawing and stamping fluid designed for use in a wide range of stamping and drawing applications including deep draws and light to heavy duty stamping and drawing operations. The unique combination of boundary lubrication and non-chlorinated extreme pressure additives provides excellent surface finishes even in the most demanding operations. Vuldra 6412 is a clean running product that is easily removed by both mildly alkaline and alkaline cleaners.

Vulclean FC-5111 is an economical, low alkalinity, general maintenance cleaner specially designed without using strong alkalies, phosphates or objectionable solvents. Vulclean FC-5111 is recommended for use in mechanical floor scrubbing, hand wipe, steam gun, and pressure washer applications.

Oxynul RP-5722 is a general purpose solvent corrosion preventative with excellent dewatering properties. After evaporation, the solvent leaves and ultra-thin greasy protective film that provides excellent protection properties for medium to long-term storage.

Oxynul RP-5511 is a general purpose water displacing, solvent-based rust preventative formulated to provide long-term indoor rust protection. The water rejecting qualities and excellent coverage of Oxynul RP-5511 make it the ideal choice for most rust protection applications.

Vulclean SP-2050 is a mild alkaline, liquid cleaner, designed for the removal of shop soils, lubes, oils, coolants and chips from ferrous surfaces. It may also be used for tumbling operations. Vulclean SP-2050 contains anti-oxidants that provide excellent anti pitting and corrosion protection.

Cutrite 3012H is formulated for light to moderate machining and grinding of ferrous metals including cast iron. Utilizing synthetic oils, it was engineered to impart maximum cooling and load carrying characteristics. Cutrite 3012H provides long lasting performance in both individual and central systems.

Vulgrind 7810B is a high performance precision grinding oil based on specially selected, thermally stable base oils. This allows Vulgrind 7810B to provide a consistent level of grinding performance as well as guaranteeing excellent wetting, lubrication and cooling.

A specially blended, highly effective, modified siloxane anti-foam agent that is effective at eliminating entrained air generated by high pressure coolant and washer systems. It is used in very small quantities where foaming has become a problem.

Cuprisan is a unique waste treatable copper complex designed to neutralize odor causing sulfides and reactive cations such as Al+3 and Fe+2. Cuprisan can be added tank-side or formulated into the coolant concentrate to provide long term odor control. Cuprisan works synergistically with biocides. When used with an Isothiazolinone-based microbicide, as little as 20% of the normal dosage is required to attain a complete kill and maintain a controlled fluid. Cuprisan will immediately eliminate and prevent the recurrence of most coolant-borne odors such as the common rotten egg smell and will aid in the stabilization of water-based cutting fluids.

Vulclean SP-2225 is an inhibited alkaline, liquid compound, designed for the effective removal of dirt, chips, coolants, oils and lube compounds from ferrous and non-ferrous parts. Utilizing the newest innovative technology, Vulclean SP-2225 has excellent cleaning capabilities and provides a non-spotting, non-tacky surface on the cleaned parts that offer 45-60 days of in-door rust protection.

Oxynul RP-710 is a general purpose solvent corrosion preventative with excellent dewatering properties. After evaporation, the solvent leaves and ultra-thin greasy protective film that provides excellent protection properties for medium to long-term storage.

Oxynul RP-1355 is a water-soluble rust and corrosion inhibitor concentrate for protecting steel, galvanized steel and aluminum parts during indoor storage. Oxynul RP-1355 leaves a thin, dry, hydrophobic film on the metal surface that provides excellent protection even in very humid conditions.

Vuldra 516 is a heavy duty drawing and stamping fluid for ferrous and non-ferrous alloys. Vuldra 516 is also very effective in light to medium gage tube bending operations. The high viscosity base oils, in conjunction with non-chlorinated ep additives provide excellent surface finishes even in the most demanding operations. Vuldra 516 can be used neat or diluted with water.

Oxynul RP-5598 is a solvent-dispersed corrosion preventive. Oxynul RP-5598 displaces free standing water, and alkaline cleaners with a protective film that provides up to twelve months indoor protection. The thin, slightly greasy film suppresses fingerprints as well.