Knowde Enhanced TDS
Identification & Functionality
- Chemical Family
- Product Type
- Technologies
Features & Benefits
Applications & Uses
- Application Method
- Application Method
- Syringe dispense
Properties
- Physical Form
- Typical Properties
- Typical Cured Properties
Value | Units | Test Method / Conditions | |
Pot Life | Latent | — | — |
Conductivity | 0.0001 | — | — |
Value | Units | Test Method / Conditions | |
Filler | Silver | — | — |
Percent Silver (cured) | 78 | — | — |
Volume Resistance | 0.0001 | Ω-cm | — |
Hydrolytic Stability | Excellent | — | — |
Useful Temperature Range | -70 to 260 | ºC | — |
Thermal Stability | Good to 325 | °C | — |
Thermal Conductivity | 12.07 | W/m-K | — |
Regulatory & Compliance
- Certifications & Compliance
Safety & Health
- Safety & Handling
- Contains flammable solvents.
- Use with adequate ventilation.
- Keep away from sparks and open flames.
- Avoid prolonged contact with skin and breathing of vapors.
- Wash with soap and water to remove from skin.
Storage & Handling
- Shelf Life
- 12 months at -10°C, 6 months at 25°C, 9 months at 5°C
- Suggested Handling & Curing
102-32 is ready to use as supplied. Further thinning may be accomplished by adding small amounts of toluene. Prior to using, be certain to resuspend silver. Apply thin film of adhesive to both surfaces to be bonded. Heat for 5 to 10 minutes at 100°C and assemble while still warm. Apply slight pressure to assure good mating of surfaces and formation of filet. Best properties, for most applications, result when cured for 5 to 10 minutes at 160°C. Add 1-2% B507 catalyst when maximum strength and chemical resistance is needed. Good properties are obtained on a variety of substrates by curing at temperatures ranging from 50°C to 180°C. End user is advised to experimentally determine temperature and time best suited for individual applications.
- Storage
- Shelf life: 6 months at 25°C; or 9 months at 5°C; or 12 months at -10°C.
- NOTE: Use catalyzed product within 24 - 36 hours.
- * 102-32 packaged in syringes must be kept frozen at -40°C to optimize the product’s shelf life