Knowde Enhanced TDS
Identification & Functionality
- Chemical Family
- Product Type
- Technologies
Features & Benefits
Applications & Uses
- Applications
- Application Area
Properties
- Typical Properties
- Properties
- Solderable - No
- Consistency - Smooth Paste
| Value | Units | Test Method / Conditions | |
| Filler | Silver | — | — |
| Percent Silver (cured) | 78 | — | — |
| Specific Gravity (water = 1) | 2.4 | — | — |
| Volume Resistance | 0.0001 | Q-cm | — |
| Hydrolytic Stability | Excellent | — | — |
| Useful Temperature Range | -70 to 260 | ºC | — |
| Thermal Stability | Good to 325 | °C | — |
| Thermal Conductivity | 12.07 | W/m-K | — |
Regulatory & Compliance
- Certifications & Compliance
Safety & Health
- Safety & Handling
Contains flammable solvents. Use with adequate ventilation. Keep away from sparks and open flames. Avoid prolonged contact with skin and breathing of vapors. Wash with soap and water to remove from skin.
Storage & Handling
- Shelf Life
- 12 months at -10°C.
- Suggested Handling & Curing
102-32D is ready to use as supplied. Further thinning may be accomplished by adding small amounts of CMI #125- 07 thinner. Prior to using, be certain to resuspend silver. Apply thin film of adhesive to both surfaces to be bonded. Heat for 5 to 10 minutes at 100°C and assemble while still warm. Apply slight pressure to assure good mating of surfaces and formation of filet. Best properties, for most applications, result when cured for 5 to 10 minutes at 160°C. Add 1-2% B507 catalyst when maximum strength and chemical resistance is needed. Good properties are obtained on a variety of substrates by curing at temperatures ranging from 50°C to 180°C. End user is advised to experimentally determine temperature and time best suited for individual applications.