Knowde Enhanced TDS
Identification & Functionality
- Chemical Family
- Product Type
- Technologies
Features & Benefits
Applications & Uses
- Application Method
- Application Method
- Syringe dispense
Properties
- Physical Form
- Typical Properties
- Typical Cured Properties
Value | Units | Test Method / Conditions | |
Pot Life | Latent | — | — |
Conductivity | 0.003 | — | — |
Value | Units | Test Method / Conditions | |
Filler | Silver | — | — |
Percent Silver (cured) | 78 | — | — |
Volume Resistance (at 75°C cure) | max. 0.003 | Ω-cm | — |
Sheet Resistance (at 75°C cure) | max. 1 | Ω/sq/mil | — |
Thermal Conductivity | 12.29 | W/m-K | — |
Thermal Conductivity | 7.1 | Btu ft/ft2 -hr-°F | — |
Hydrolytic Stability | Excellent | — | — |
Useful Temperature Range | -70 to 260 | ºC | — |
Thermal Stability | Good to 325 | °C | — |
Regulatory & Compliance
- Certifications & Compliance
Safety & Health
- Safety & Handling
- Contains flammable solvents.
- Use with adequate ventilation.
- Keep away from sparks and open flames.
- Avoid prolonged contact with skin and breathing of vapors.
- Wash with soap and water to remove from skin.
Storage & Handling
- Shelf Life
- 12 months at -10°C, 6 months at 25°C, 9 months at 5°C
- Suggested Handling & Curing
102-32RT is ready to use as supplied. Further thinning may be accomplished by adding small amounts of toluene, xylene, or 127-05. Prior to using, be certain to resuspend silver. Apply thin film of adhesive to both surfaces to be bonded. Heat for 5 to 10 minutes at 100°C and assemble while still warm. Apply slight pressure to assure good mating of surfaces and formation of filet. Best properties, for most applications, result when cured for 5 to 10 minutes at 160°C. Add 1-2% B507 catalyst when maximum strength and chemical resistance is needed. Good properties are obtained on a variety of substrates by curing at temperatures ranging from 50°C to 180°C. End user is advised to experimentally determine temperature and time best suited for individual applications.
- Storage
- Shelf life: 6 months at 25°C; or 9 months at 5°C; or 12 months at -10°C.
- NOTE: Use catalyzed product within 24 - 36 hours.
- * 102-32RT packaged in syringes must be kept frozen at -10°C