Knowde Enhanced TDS
Identification & Functionality
- Product Type
- Technologies
- Product Families
Features & Benefits
Applications & Uses
- Applications
- Application Area
- Application Method
- Compatible Substrates & Surfaces
- Cure Method
- Application Method
- Screen-print
Properties
- Typical Properties
- Typical Cured Properties
| Value | Units | Test Method / Conditions | |
| Conductivity | min. 1M | ohms/sq/mil | — |
| Value | Units | Test Method / Conditions | |
| Filler | Carbon | — | — |
| Volume Resistivity | 63 | Ω - cm | — |
| Sheet Resistivity | 25000 | Ω/sq | — |
| Hydrolytic Stability | Excellent | — | — |
| Useful Temperature Range | -55 to 200 | ºC | — |
| Thermal Stability | Good to 325 | °C | — |
Regulatory & Compliance
- Certifications & Compliance
Safety & Health
- Safety & Handling
- Use with adequate ventilation.
- Keep away from sparks and open flames.
- Avoid prolonged contact with skin and breathing of vapors.
- Wash with soap and water to remove from skin.
Storage & Handling
- Shelf Life
- 2 months at 25°C, 6 months at 5°C, 12 months at -10°C
- Suggested Handling & Curing
112-47 is ready to use as supplied. Further thinning may be accomplished by adding small amounts of CMI Thinner #112-19. Prior to use, be certain to mix well to resuspend fillers. Best properties, for most applications, result when cured for 5 minutes at 125°C. Excellent properties are also obtained on a variety of substrates by curing at temperatures ranging from 50°C to 175°C. End user is advised to experimentally determine temperature and time best suited for individual applications.