Knowde Enhanced TDS
Identification & Functionality
- Chemical Family
- Product Type
- Technologies
- Product Families
Features & Benefits
Applications & Uses
- Applications
- Application Area
- Application Method
- Cure Method
- Application Method
- Screen-print
Properties
- Typical Properties
- Typical Cured Properties
| Value | Units | Test Method / Conditions | |
| Conductivity | 0.05 | — | — |
| Ag/AgCl Ratio | 82:18 | — | — |
| Value | Units | Test Method / Conditions | |
| Viscosity | 12,000 - 16,000 | cps | — |
| Filler | Silver/Silver Chloride | — | — |
| Volume Resistivity | 0.0002 | ohm-cm | — |
| Sheet Resistivity | 0.05 | ohm/sq. | — |
| Hydrolytic Stability | Excellent | — | — |
| Useful Temperature Range | -55 to 200 | ºC | — |
| Thermal Stability | Good to 325 | °C | — |
Regulatory & Compliance
- Certifications & Compliance
Safety & Health
- Safety & Handling
- Use with adequate ventilation.
- Keep away from sparks and open flames.
- Avoid prolonged contact with skin and breathing of vapors.
- Wash with soap and water to remove from skin
Storage & Handling
- Shelf Life
- 2 months at 25°C, 6 months at -10°C
- Suggested Handling & Curing
113-09(S) is ready to use as supplied. Further thinning may be accomplished by adding small amounts of CMI Thinner 102-03 and/or butyl cellosolve acetate. Prior to using, be certain to resuspend silver. Best properties, for most applications, result when cured for several minutes at 125°C. Good properties are obtained on a variety of substrates by dry and curing at temperatures ranging from 110°C to 180°C. Not recommended for applications that cannot cure above 110°C. End user is advised to experimentally determine temperature and time best suited for individual applications.