Knowde Enhanced TDS
Identification & Functionality
- Product Type
- Technologies
- Product Families
Features & Benefits
Applications & Uses
- Markets
- Application Area
- Application Method
- Cure Method
Properties
- Typical Properties
Value | Units | Test Method / Conditions | |
Viscosity | 11000 | cps | — |
Percent Filler (cured) | min. 95 | — | — |
Density (Cured) | 12.05 | g/cc | — |
Crosshatch Adhesion (PEBAX) | 5B | — | — |
Pencil Hardness | F | — | — |
Useful Temperature Range | -55 to 200 | ºC | — |
Thermal Stability | Good to +250 | °C | — |
Regulatory & Compliance
- Certifications & Compliance
Safety & Health
- Safety & Handling
- Use with adequate ventilation.
- Keep away from sparks and open flames.
- Avoid prolonged contact with skin and breathing of vapors.
- Wash with soap and water to remove from skin.
Storage & Handling
- Shelf Life
- max. 4 weeks at 25°C, 12 months at -40°C, 6 months at -20°C
- Suggested Handling
119-31TS is ready to use as supplied. Further thinning may be accomplished by adding small amounts of CMI thinners 113-39 or 127-32R2. Prior to use, be certain to mix well to resuspend filler.
- Suggested Curing
Best properties, for most applications, result when cured following one of the below cure schedules but good results can be attained with temperatures between 110° and 200°C. End user is advised to experimentally determine temperature and time best suited for individual applications though higher temperatures are recommended for difficult to stick to substrates.
Time (min) Temp. (°C) 30 - 45 125 5 - 10 150 2 - 5 175