Knowde Enhanced TDS
Identification & Functionality
- Chemical Family
- Product Type
- Technologies
- Product Families
Features & Benefits
Applications & Uses
- Applications
- Application Method
- Cure Method
Properties
- Color
- Typical Properties
- Typical Cured Properties
| Value | Units | Test Method / Conditions | |
| Conductivity | 0.01 | ohms/sq/mil | — |
| Value | Units | Test Method / Conditions | |
| Viscosity | 22,000 - 28,000 | cps | — |
| Filler | Silver | — | — |
| Percent Silver (cured) | min. 88 | — | — |
| Volume Resistance | max. 0.000045 | Ω-cm | — |
| Sheet Resistivity | 0.015 | Ω/sq./mil | — |
| Hydrolytic Stability | EXcellent | — | — |
| Useful Temperature Range | -55 to 200 | ºC | — |
Regulatory & Compliance
- Certifications & Compliance
Safety & Health
- Safety & Handling
- Use with adequate ventilation. Keep away from sparks and open flames. Avoid prolonged contact with skin and breathing of vapors. Wash with soap and water to remove from skin.
Storage & Handling
- Shelf Life
- 2 months at 25˚C, 6 months at -10°C
- Suggested Handling & Curing
120-07(LPS) is ready to use as supplied. Further thinning may be accomplished by adding small amounts of thinner 124-13. Prior to using, be certain to resuspend silver. Best properties, for most applications, result when cured for a few minutes at 175°C. Good properties are obtained on a variety of substrates by dry and curing at temperatures ranging from 110°C to 180°C. Not recommended for applications that cannot cure above 110°C. End user is advised to experimentally determine temperature and time best suited for individual applications.