Knowde Enhanced TDS
Identification & Functionality
- Product Type
- Technologies
- Product Families
Features & Benefits
Applications & Uses
- Applications
- Application Area
- Application Method
- Cure Method
Properties
- Typical Properties
| Value | Units | Test Method / Conditions | |
| Conductivity | max. 50 | ohms/sq/mil | — |
| Viscosity | 80,000 - 100,000 | cps | — |
| Filler | Carbon | — | — |
| Volume Resistivity | 0.05 | Q-cm | — |
| Sheet Resistivity | 20 | Q/sq/mil | — |
| Pencil Hardness (glass) | 8H | — | — |
| Useful Temperature Range | -55 to 350 | ºC | — |
| Thermal Stability | Good to +410 | °C | — |
| Wet Coverage | 48 | in2/gm/mil | — |
| Specific Gravity | 1.27 | g/cc | — |
Regulatory & Compliance
- Certifications & Compliance
Safety & Health
- Safety & Handling
- Use with adequate ventilation.
- Keep away from sparks and open flames.
- Avoid prolonged contact with skin and breathing of vapors.
- Wash with soap and water to remove from skin.
Storage & Handling
- Shelf Life
- 6 months at 5°C, 1 month at 25°C, 12 months at -20°C
- Suggested Handling & Curing
121-35UT is ready to use as supplied. Further thinning may be accomplished by adding small amounts of CMI thinner 102-03. Prior to using be certain to resuspend filler. Best properties for most applications result when pre-curing for 30 minutes at 150°C followed by curing for 60 minutes at 250°C. Good properties are obtained on a variety of substrates by dry and curing at temperatures ranging from 150°C to 250°C. End user is advised to experimentally determine temperature and time best suited for individual applications.