Knowde Enhanced TDS
Identification & Functionality
- Chemical Family
- Product Type
- Technologies
- Product Families
Features & Benefits
Applications & Uses
- Applications
- Application Method
- Cure Method
- Applications
- Abrasion resistant economical conductive ink
- Application Method
- Screen-print
Properties
- Physical Form
- Typical Properties
- Typical Cured Properties
- Properties
- Solderable - No
Value | Units | Test Method / Conditions | |
Conductivity | 0.015 | ohms/sq/mil | — |
Value | Units | Test Method / Conditions | |
Viscosity | 21500 | cps | — |
Percent Filler (cured) | min. 87 | — | — |
Volume Resistivity | max. 0.00003 | Ω - cm | — |
Sheet Resistivity | max. 0.015 | Ω/sq/mil | — |
Hydrolytic Stability | Excellent | — | — |
Useful Temperature Range | -55 to 180 | ºC | — |
Thermal Stability | Good to 230 | °C | — |
Theoretical Wet Coverage | 24.9 | in2/gm/mil | — |
Specific Gravity | 2.45 | — | — |
Regulatory & Compliance
- Certifications & Compliance
Safety & Health
- Safety & Handling
- Use with adequate ventilation.
- Keep away from sparks and open flames.
- Avoid prolonged contact with skin and breathing of vapors.
- Wash with soap and water to remove from skin.
Storage & Handling
- Shelf Life
- 6 months at 25°C
- Suggested Handling & Curing
125-10ADP is ready to use as supplied. Further thinning may be accomplished by adding small amounts of thinner 102-03 or 127-17. Prior to using, be certain to resuspend fillers. Best properties, for most applications, result when cured for several minutes at 100°C. Good properties are obtained on a variety of substrates by dry and curing at temperatures ranging from 50°C to 150°C. End user is advised to experimentally determine temperature and time best suited for individual applications.