Knowde Enhanced TDS
Identification & Functionality
- Chemical Family
- Product Type
- Technologies
- Product Families
Features & Benefits
Applications & Uses
- Applications
- Application Area
- Application Method
- Cure Method
- Application Method
- Screen-print
Properties
- Color
- Typical Properties
Value | Units | Test Method / Conditions | |
Conductivity | 0.1 | ohms/sq/mil | — |
Viscosity | 40000 | cps | — |
Filler | Silver | — | — |
Percent Silver (cured) | min. 66 | — | — |
Specific Gravity (water = 1) | 2.4 | — | — |
Volume Resistance | max. 0.0003 | Ω-cm | — |
Sheet Resistance | max. 0.1 | Ω/sq/mil | — |
Hydrolytic Stability | Excellent | — | — |
Useful Temperature Range | -60 to 280 | ºC | — |
Thermal Stability | Good to +360 | °C | — |
Regulatory & Compliance
- Certifications & Compliance
Safety & Health
- Safety & Handling
- Use with adequate ventilation. Keep away from sparks and open flames. Avoid prolonged contact with skin and breathing of vapors. Wash with soap and water to remove from skin.
Storage & Handling
- Shelf Life
- 6 months at 5°C, 12 months at -10°C, Up to 2 weeks at 25°C
- Suggested Handling & Curing
- 125-19(SP)C is ready to use as supplied. Further thinning may be accomplished by adding small amounts of CMI 127-05 or Xylene. Prior to using, be certain to re-suspend silver. Good properties are achieved when cured for 60 minutes at 150°C but end user is advised to experimentally determine temperature and time best suited for individual applications. 125-19(SP)C is not recommended for applications that cannot cure below 150°C.
- Shelf Life
Up to 2 weeks at 25°C; or 6 months at 5°C; or 12 months at -10°C.