Knowde Enhanced TDS
Identification & Functionality
- Chemical Family
- Product Type
- Technologies
- Product Families
Features & Benefits
Applications & Uses
- Applications
- Application Area
- Application Method
- Cure Method
- Mixing Instructions
Premix 125-26 Part A, in original container prior to adding curing agent. Add B119-44 and mix until uniform. At this point the material may be thinned by adding small amounts of CMI 113-12 thinner.
- Application Method
- Screen-print
Properties
- Color
- Typical Properties
- Typical Cured Properties
Value | Units | Test Method / Conditions | |
Pot Life | 4 days | — | — |
Conductivity | 0.015 | ohms/sq/mil | — |
Value | Units | Test Method / Conditions | |
Filler | Silver | — | — |
Percent Silver (cured) | min. 85 | — | — |
Sheet Resistivity | max. 0.015 | ohm/sq./mil | — |
Hydrolytic Stability | Excellent | — | — |
Useful Temperature Range | -55 to 200 | ºC | — |
Thermal Stability | Good to 200 | °C | — |
Regulatory & Compliance
- Certifications & Compliance
Technical Details & Test Data
- Mix Ratio
Mix Ratio (By Weight): Part A Part B119-44 100 1.5
Safety & Health
- Safety & Handling
Use with adequate ventilation. Keep away from sparks and open flames. Avoid prolonged contact with skin and breathing of vapors. Wash with soap and water to remove from skin. Note: It is not unusual for crystallization of the Part B to occur. Warm to 40-45°C in a water bath to return the material to it's original viscosity. The crystallization does not affect the performance of the product in anyway.
Storage & Handling
- Shelf Life
- 12 months at 25°C
- Cure Schedule And Conductivity
Cure Temperature(°C) Cure Time Conductivity Achievable (Ω/sq/mil)
100 1 1 Hour <0.060 150 30 Minutes < 0.030 150 1 Hour <0.020 175 30 Minutes <0.020 175 1 Hour <0.015 Note: Cure times are suggestions and customers are advised to experiment for what works best in their application.
- Shelf Life
- 12 months at 25°C, in unopened, unmixed containers.