Knowde Enhanced TDS
Identification & Functionality
- Chemical Family
- Product Type
- Technologies
- Product Families
Features & Benefits
Applications & Uses
- Applications
- Application Area
- Application Method
- Cure Method
- Mixing Instructions
Premix each part in original containers prior to mixing them together by hand until the combination is uniform.
Part A Part A Color Silver Silver Specific Gravity 3.38 3.38 Mix ratio by weight 1 1 Pot-Life once mixed at 25°C 4 days - Application Method
- Screen-print
Properties
- Typical Properties
| Value | Units | Test Method / Conditions | |
| Conductivity | 0.1 | — | — |
| Ag/AgCl Ratio | 82:18 | — | — |
| Viscosity | 25000 | cps | — |
| Filler | Silver/Silver-Chloride | — | — |
| Percent Silver (cured) | min. 78 | — | — |
| Specific Gravity (water = 1) | 3.36 | — | — |
| Volume Resistance | max. 0.00025 | Ω-cm | — |
| Sheet Resistance | max. 0.1 | Ω/sq/mil | — |
| Hydrolytic Stability | Excellent | — | — |
| Useful Temperature Range | -60 to 280 | ºC | — |
| Thermal Stability | Good to +360 | °C | — |
Regulatory & Compliance
- Certifications & Compliance
Safety & Health
- Safety & Handling
- Use with adequate ventilation.
- Keep away from sparks and open flames.
- Avoid prolonged contact with skin and breathing of vapors.
- Wash with soap and water to remove from skin
Storage & Handling
- Shelf Life
- 12 months at 25˚C
- Suggested Handling & Curing
126-49(SP)A/B is ready to use as supplied. Further thinning may be accomplished by adding small amounts of CMI 127-05 or Xylene. Prior to using, be certain to re-suspend silver. Good properties are achieved when cured for 60 minutes at 150°C but end user is advised to experimentally determine temperature and time best suited for individual applications. 126-49(SP)A/B is not recommended for applications that cannot cure below 100°C.