Knowde Enhanced TDS
Identification & Functionality
- Chemical Family
- Product Type
- Technologies
Features & Benefits
Applications & Uses
- Markets
- Application Area
- Application Method
- Cure Method
- Application Method
- Screen-print
- B-stage Procedure
Apply adhesive to substrate. Next apply heat to advance the curing to the slightly tacky stage (when cooled to room temperature). A temperature of 65°C for 15 -30 minutes is required (B-Stage time is mass related). User is encouraged to experiment for optimum drying time at a given temperature. Store on release liner to prevent contamination.
Properties
- Uncured Properties
- Typical Cured Properties
Value | Units | Test Method / Conditions | |
Brookfield Viscosity - HAT Viscometer (at 10 rpm at 25°C) | 65000 | cps | — |
Specific Gravity (water = 1) | 1.34 | g/cc | — |
Theoretical Coverage(at 0.001" Thickness) | 38 | in^2 | — |
Screen Life | min. 6 | hrs | — |
Value | Units | Test Method / Conditions | |
Volume Resistivity | 1x 10^16 | Ω - cm | — |
Useful Temperature Range | -55 to 170 | ºC | — |
Die Shear Strength (2 mm x 2 mm Si die) | 35 | Lb-f | — |
Dielectric Constant (at 100 Hz) | 4 | — | — |
Hermetic Stability | Good to 170 | °C | — |
Glass Transition Temperature | 285 | °C | — |
Regulatory & Compliance
- Certifications & Compliance
Storage & Handling
- Shelf Life
- 4 days (at 25°C)
- Curing Guidelines
128-38 is a one component system and is ready to use as received. Store frozen to maintain consistent flow properties. Allow material to warm up to room temperature before opening container. Prior to using mix container well. For hermetic lid attach applications, B-stage the material for 30 minutes at 65°C and bond the parts applying uniform pressure. Then cure for 90 minutes at 80°C. As a coating, cure for one (1) hour at 150°C, or 30 minutes at 175°C. 128-38 can be thinned with small amounts of CMI# 113-12 thinner if needed.
Temperature (°C) Time (min.) 80 90 150 60 175 30 These temperature and times are presented as a guide only. The end-user is encouraged to experiment to determine optimum curing schedule.
- Shelf Life
Storage Temperature Containers B-Staged Film 25°C 4 days 2 days -20°C 3 months 1 month