Knowde Enhanced TDS
Identification & Functionality
- Chemical Family
- Plastics & Elastomers Functions
- Technologies
Features & Benefits
- Labeling Claims
- Materials Features
- Product Highlights
- High effective release performance with fluorocarbon as the principal ingredient.
- PFOA and PFOS free* and complies with environmental regulations such as TSCA and RoHS.
- *≦5ppb detection limit.
- Little transfer, no stickiness left on the mold product.
- Minimal mold contamination is produced, reducing mold -cleaning requirements and improving productivity.
- A degassing cap is provided so that the aerosol product can be discarded safely.
Applications & Uses
- Markets
- Compatible Polymers & Resins
- Plastics & Elastomers End Uses
- Applications
- Rubbers ; SBR, NBR,EPDM,FKM,CR,ACM, etc.
- Thermosetting Resins ; Epoxy, Unsaturated polyester, Phenol, etc.
- Thermoplastics ; PE, PP, PVC, ABS, etc.
Properties
- Physical Properties
- Note
*¹ The above values are representative and not guaranteed.
| Value | Units | Test Method / Conditions | |
| Fire Service Act | Flammable | — | — |
| NET | 420 | ml | — |
| Principal Solvent | Isooctane | — | — |
| Propellant | LPG | — | — |
Regulatory & Compliance
- Certifications & Compliance
- Chemical Inventories
Technical Details & Test Data
- Method of use
How to apply
- Shake the can well, hold it about 20‐30cm away from the mold, and then spray lightly so that a thin uniform film is formed.
- Before using the product for the first time, remove the old release agent completely.
- Use the steps in ‘(2) Cleaning the mold’ below to clean correctly.
Cleaning the mold
- Slight contamination of the mold release agent can usually be removed to a certain degree by wiping with a solvent (IPA, toluene, acetone).
- Alkaline cleaning agents are effective for complete removal. (Immerse in an approx.
- 10% aqueous solution of potassium hydroxide or sodium hydroxide to which a small amount of surfactant has been added. The cleaning solution should be at a temperature of 60‐80°C)
Use temperature range
From room temperature to 200°C
Safety & Health
- Handling Method / Safety Information
- Be sure to read the Safety Data Sheet (SDS) and precautions on the label before using.
- This product has been developed for industrial purposes and we shall not guarantee the the safety if used for any other purposes. If it is going to be used for medical or food applications, please contact us in advice.
Packaging & Availability
- Package Size
20 cans / 1 carton