Knowde Enhanced TDS
Identification & Functionality
- Chemical Family
- CASE Ingredients Functions
- Technologies
- Product Families
Features & Benefits
- Labeling Claims
- CASE Ingredients Features
- Product Highlights
OPTOOL DSX E is especially effective on glass and surfaces coated with SiO2.
It adds the following characteristics to the surfaces:- Water and oil resistant.
- Anti adhesion of oils like fingerprints and its easy removability.
- Low friction surfaces.
- Durability.
- Sliding angle reduction, especially effective for oils.
- Non cohesiveness.
- Ice suppression and easy removability.
- It is simply used and contributes to rapid processing.
Applications & Uses
- Compatible Substrates & Surfaces
Properties
- Physical Form
- Typical Properties
- Note
- The following Typical Properties was measured on DSX E coated Gorilla Glass surface and are not suitable for specification purposes.
- (*2) Irradiation time to keep water contact angle above 100 degrees. UV source: UV B313, Irradiance ( at 313nm):0.63W/m2
- (*3) Irradiation time to keep water contact angle above 100 degrees (SAE J2527)
- (*4) Maximum rubbing cycles to keep water contact angle above 100 degrees. Conditions: Steel wool #0000, Load: 1 Kgf/cm2, Stroke: 6cm, Speed: 60rpm
- (*5) Equipment: LabthinkFPT-1, Load: 200g, Speed: 200mm/min, friction material: paper
- (*6) Water contact angle in Air 130 after 6days passage.
- (*7) Water contact angle in Air 85°C°C/85%RH after 6days passage.
- (*8) Water contact angle in 1.0mass% HClaq. 25 after 4days passage.
- (*9) Water contact angle in 4.0mass% NaOHaq. 25 after 4hours passage.
Value | Units | Test Method / Conditions | |
Acid Resistant (*8) | 107 | Degree | — |
Base Resistant (*9) | 59 | Degree | — |
Cleanability | Excellent | — | — |
COF (*5) | 0.07 | — | — |
Critical Surface Tension | 13 | mN/m | — |
Haze | 0.25 | % | — |
QUV Durability (*2) | 72 | h | — |
Sliding Angle (n-hexadecane) | 6 | Degree | — |
Sliding Angle (Water) | 8 | Degree | — |
Steel Wool Abrasion Durability (*4) | 6000 | cycle | — |
Tendency for Fingerprint Transfer | Better | — | — |
Water Contact Angle | 115 | Degree | — |
Water Contact Angle | 114 | Degree | High Temperature Test (*6) |
Water Contact Angle | 115 | Degree | High Temperature and High Humidity Test (*7) |
Xenon Arc Lamp Durability (*3) | 200 | h | — |
Safety & Health
- Handling / Safety Information
- Be sure to read the notes on SDS and labels before use.
- This product is intended for general industry, and therefore its adequacy and safety as a raw material for medical purposes cannot be guaranteed.
Packaging & Availability
- Packing Specification
100g