Knowde Enhanced TDS
Identification & Functionality
- Chemical Family
- CASE Ingredients Functions
- Technologies
- Product Families
Features & Benefits
- CASE Ingredients Features
- Characteristics
- May be formulated into low surface tension coatings
- Excellent abrasion resistance
- Non-fugitive silicone component
- Crosslinkable for improved adhesion and performance
- Contains dipropylene glycol dimethyl ether co-solvent
Applications & Uses
- Application Method
- Compatible Polymers & Resins
- Coating Type
- Suggested Uses
HD-2602 DMM was designed primarily for topcoat applications where slip and abrasion resistance properties are required. HD-2602 DMM contains a non-fugitive silicone component that provides low surface tension characteristics on flexible and rigid substrates including plastics, metals and textiles.
- Application Method & Drying
HD-2602 DMM may be used as a sole vehicle or blended with acrylic emulsions for spray or rotogravure applications. Rheology modifications can be made with associative thickeners for alternative application methods.
Drying
HD-2602 DMM can be air dried, if desired, depending on film thickness. Typical oven drying temperatures and dwell times for aqueous coatings are sufficient to produce optimal film properties.
Properties
- Physical Form
- Physical Properties
- Typical Properties
Value | Units | Test Method / Conditions | |
Density | 8.7 | lb/gal | — |
pH | 7.0 - 9.5 | — | — |
Softening Point | 305.0 | ºF | — |
Solid Content | 35.0 | % | — |
Solids Tolerance | 0 - 2 | % | — |
Sward Hardness | 35.0 | — | — |
Viscosity | 50 - 500 | cps | — |
VOC Content (As Supplied) | 73.0 | g/l | — |
Value | Units | Test Method / Conditions | |
Elongation (20 Inches/Minute) | 300.0 | % | — |
Modulus (100%, 20 inches/minute) | 3180.0 | psi | — |
Modulus (200%, 20 Inches/Minute) | 4610.0 | psi | — |
Tensile Strength (20 Inches/Minute) | min. 6375 | psi | — |
Regulatory & Compliance
- Chemical Inventories
Packaging & Availability
- Regional Availability