Knowde Enhanced TDS
Identification & Functionality
- Chemical Family
- Chemical Name
- CASE Ingredients Functions
- Composite Materials Functions
- Plastics & Elastomers Functions
- Technologies
Features & Benefits
- Labeling Claims
- CASE Ingredients Features
- Materials Features
- Features and Benefits
- Portaflame® SG LV products are “Low Viscosity” optimized grades. The exceptional low Oil Absorption value gives the formulator the opportunity to achieve higher loading levels.
- Portaflame® SG LV products are ground halogen-free flame retardant (HFFR) fillers used in a broad range of applications, e.g. SMC & BMC, pultrusion, Gelcoats, carpet backing, potting resins, sealants, adhesives, cable bedding compounds and polymer concrete. Their flame-retarding action is based mainly upon the endothermic decomposition of metal hydroxide (heat-sink effect) and simultaneous release of water vapor. This reaction starts at about 200°C. In addition to flame retardancy, fillers in the Portaflame® SG LV range possess a strong smokesuppressing ability. They are not classified as a dangerous substance (DSD and CLP) and do not contain Substances of Very High Concern (SVHC), including their decomposition products from fire.
Applications & Uses
- Applications
- Composites End Use
- Plastics & Elastomers End Uses
- Composites Processing Methods
Properties
- Physical Form
- Physical Properties
- Particle Size Distribution
- Chemical Analysis
Value | Units | Test Method / Conditions | |
Specific Surface Area | 6.0 | m²/g | BET |
Oil Absorption | 23.0 | g/100g | ISO 787/5 |
Color (D65;10º, L*) | 98.5 | — | CIELAB DIN 6174 |
Color (D65;10º, a*) | 0.3 | — | CIELAB DIN 6174 |
Color (D65;10º, b*) | 1.0 | — | CIELAB DIN 6174 |
Moisture Content (at 120°C) | 0.7 | % | Halogen Dryer |
pH | 9.0 | — | ISO 787/9 |
Density | 2.4 | g/cm³ | — |
Apparent Density | 0.4 | g/cm³ | AP method (MF-17) |
Hardness | 3.0 | — | Mohs’ scale |
Refractive Index | 1.57 | — | — |
Thermal Stability | approx. 200 | °C | DSC |
Value | Units | Test Method / Conditions | |
Percentage Passing on Individual Sieve (25 μm) | 0.0 | % | Wet sieve analysis |
Percentage Passing on Individual Sieve (45 μm) | 0.0 | % | Wet sieve analysis |
Particle Size (D50) | 3.9 | μm | Laser diffraction Sympatec |
Particle Size (D97) | 11.0 | μm | Laser diffraction Sympatec |
Value | Units | Test Method / Conditions | |
Aluminum Oxide (Al₂O₃) | 65.0 | wt% | XRF |
Sodium Oxide (Na₂O) | 0.2 | wt% | XRF |
Ferric Oxide (Fe₂O₃) | 0.01 | wt% | XRF |
Loss on Ignition (1000°C, 1 hour) | 34.5 | wt% | XRF |
Regulatory & Compliance
- Certifications & Compliance
- Chemical Inventories
Packaging & Availability
- Regional Availability