Products

JetFil® V625C is an extremely platy, fine talc product that is beneficiated to maximize stiffness, HDT, and dimensional stability in plastics applications. The particle size distribution and top size of this product are engineered and controlled to provide maximum impact strength and the best balance of stiffness and impact resistance. JetFil® V625C is compacted to enhance compounding throughput and reduce dust generation.

Portaflame® SG10 LV-01 is produced from carefully selected synthetic aluminum hydroxide (ATH). The standardized quality of Portaflame® SG is guaranteed by means of an ISO 9001-certified quality management plan. The chemical composition of the raw material and the finished product is closely monitored, and the particle size is kept within a narrow variation.

Portaflame® SG 55 LV are produced from carefully selected, synthetic aluminum hydroxide (ATH). The standardized quality of Portaflame® SG LV is guaranteed by means of an ISO 9001-certified quality management plan. The chemical composition of the raw material and the finished product is closely monitored, and the particle size is kept within a narrow variation. Portaflame® SG LV are "low viscosity" optimized grades with exceptional low oil absorption values, giving the formulator the opportunity to achieve higher loading levels. It is used to make flame retardant aluminum sandwich panels.

Securoc® B9 is produced from carefully selected, naturally occurring magnesium hydroxide. The standard quality of Securoc® B is guaranteed by means of an ISO 9001-certified quality management plan. The chemical composition of the raw material and the finished product is closely monitored, and particle size is kept within a narrow variation. Securoc® B products are developed as functional halogen-free flame retardant (HFFR) fillers for plastics and rubbers. Their flame retardant activity is primarily due to the endothermic decomposition of metal hydroxide (the heat sink effect) and the simultaneous release of water vapor. This reaction starts at about 300°C. Besides being flame retardant, they also possess a strong smoke-suppressing ability. These flame retardants are used in applications where processing temperatures exceed 200ºC, making ATH unsuitable. Its main uses are in wire and cable compounds, polyolefin roofing membranes, and electrical appliances based on thermoset compounds.

Securoc® B25 is produced from carefully selected, naturally occurring magnesium hydroxide. The standard quality of Securoc® B is guaranteed by means of an ISO 9001-certified quality management plan. The chemical composition of the raw material and the finished product is closely monitored, and particle size is kept within a narrow variation. Securoc® B products are developed as functional halogen-free flame retardant (HFFR) fillers for plastics and rubbers. Their flame retardant activity is primarily due to the endothermic decomposition of metal hydroxide (the heat sink effect) and the simultaneous release of water vapor. This reaction starts at about 300°C. Besides being flame retardant, they also possess a strong smoke-suppressing ability. These flame retardants are used in applications where processing temperatures exceed 200ºC, making ATH unsuitable. Its main uses are in wire and cable compounds, polyolefin roofing membranes, and electrical appliances based on thermoset compounds.

Securoc® C10 F12.0 is produced from a carefully selected, naturally occurring, platy sedimentary mineral that consists of partially hydrated magnesium-calcium carbonate. The standardized quality of Securoc® C10 is guaranteed by means of an ISO 9001-certified quality management plan. The chemical composition of the raw material and the finished product is closely monitored, and the particle size is kept within a narrow variation. Securoc® C10 is a very fine, platy-shaped filler that is flame and smoke retardant. In addition, this product works as an effective acid scavenger in halogen-containing polymers. It provides flame retardancy along with good smoke suppression and char formation, either by itself or in combination with ATH.

JetFil® V575C is a high-purity, extremely platy, fine talc product that is beneficiated to maximize stiffness, HDT and  dimensional stability in plastics applications. The particle size distribution and top size of this product are engineered and controlled to provide maximum impact strength and the best balance of stiffness and impact resistance. JetFil® V575C is compacted to enhance compounding throughput and reduce dust generation.

Portaflame® SG10 LV-02 is produced from carefully selected synthetic aluminum hydroxide (ATH). The standardized quality of Portaflame® SG is guaranteed by means of an ISO 9001-certified quality management plan. The chemical composition of the raw material and the finished product is closely monitored, and the particle size is kept within a narrow variation.

JetFil® H390 is an off-white talc recommended for improving stiffness, HDT, and dimensional stability in polymer applications. It is used in polypropylene applications to achieve maximum stiffness at loading levels as high as 20%, 40%, or higher. It is commonly used in wood-plastic composites (WPC).

Securoc® D10 is produced from a carefully selected, naturally occurring, platy sedimentary mineral that consists of partially hydrated magnesium-calcium carbonate. The standardized quality of Securoc® D10 is guaranteed by means of an ISO 9001-certified quality management plan. The chemical composition of the raw material and the finished product is closely monitored, and the particle size is kept within a narrow variation. It provides flame retardancy along with good smoke suppression and char formation, either by itself or in combination with ATH.

Portaflame® SG 100 LV is produced from carefully selected synthetic aluminum hydroxide (ATH). This range of Portaflame® SG -LV are "low viscosity" optimized grades with exceptional low oil absorption values, giving the formulator the opportunity to achieve higher loading levels in different polymer systems. It is used in aluminum sandwich panels to make them flame retardant.

Securoc® B125 is produced from carefully selected, naturally occurring magnesium hydroxide. The standard quality of Securoc® B is guaranteed by means of an ISO 9001-certified quality management plan. The chemical composition of the raw material and the finished product is closely monitored, and particle size is kept within a narrow variation. Securoc® B products are developed as functional halogen-free flame retardant (HFFR) fillers for plastics and rubbers. Their flame retardant activity is primarily due to the endothermic decomposition of metal hydroxide (the heat sink effect) and the simultaneous release of water vapor. This reaction starts at about 300°C. Besides being flame retardant, they also possess a strong smoke-suppressing ability. These flame retardants are used in applications where processing temperatures exceed 200ºC, making ATH unsuitable. Its main uses are in wire and cable compounds, polyolefin roofing membranes, and electrical appliances based on thermoset compounds.

JetFil® V700C is an off-white, high-purity, extremely platy, ultrafine talc with excellent top-size control that is recommended for excellent stiffness, HDT and dimensional stability, impact strength, and esthetics in high-performance plastics. It is also ideal for the nucleation of semi-crystalline plastics, plastic films, and foamed plastics. It is compacted for maximum extruder throughput, minimum dust, and improved dispersion.

Securoc® C10 F11.0 is produced from a carefully selected, naturally occurring, platy sedimentary mineral that consists of partially hydrated magnesium-calcium carbonate. The standardized quality of Securoc® C10 is guaranteed by means of an ISO 9001-certified quality management plan. The chemical composition of the raw material and the finished product is closely monitored, and the particle size is kept within a narrow variation. Securoc® C10 is a very fine, platy-shaped filler that is flame and smoke retardant. In addition, this product works as an effective acid scavenger in halogen-containing polymers. It provides flame retardancy along with good smoke suppression and char formation, either by itself or in combination with ATH.

Securoc® C10 F13.0 is produced from a carefully selected, naturally occurring, platy sedimentary mineral that consists of partially hydrated magnesium-calcium carbonate. The standardized quality of Securoc® C10 is guaranteed by means of an ISO 9001-certified quality management plan. The chemical composition of the raw material and the finished product is closely monitored, and the particle size is kept within a narrow variation. Securoc® C10 is a very fine, platy-shaped filler that is flame and smoke retardant. In addition, this product works as an effective acid scavenger in halogen-containing polymers. It provides flame retardancy along with good smoke suppression and char formation, either by itself or in combination with ATH.

Mistroblock 1HT-1HTC is a bright, micro-lamellar talc with the finest size distribution among the Mistroblock® products to maximize clarity and provide a minimum effect on haze. It is developed specifically for polyolefin film anti-blocking applications with excellent mechanical film properties. Mistroblock® 1HT is surface modified for reduced interaction with processing aids and improved dispersion in masterbatch applications. Mistroblock® 1HTC is the compacted form of Mistroblock® 1HT and is recommended for maximum extruder throughput and minimum dust formation.

JetFil® H590 is an off-white talc recommended for improving stiffness, HDT, and dimensional stability in polymer applications. It is used in polypropylene applications to achieve maximum stiffness at loading levels as high as 20%, 40%, or higher. It is commonly used in wood-plastic composites (WPC).

JetFil® V390 is an extremely platy, coarse talc product that is beneficiated to maximize stiffness, HDT, and dimensional stability in plastics applications. The particle size distribution and top size of this product are engineered and controlled to provide maximum impact strength and the best balance of stiffness/impact resistance.

JetFil® 575C-HB is a white, high-purity, extremely platy, fine talc. It is recommended for excellent stiffness, HDT, and dimensional stability in high-performance plastics, plastic films, and wire and cable applications. It is in compacted form for maximum extruder throughput, minimum dust, and improved dispersion.

Securoc® B45 is produced from carefully selected, naturally occurring magnesium hydroxide. The standard quality of Securoc® B is guaranteed by means of an ISO 9001-certified quality management plan. The chemical composition of the raw material and the finished product is closely monitored, and particle size is kept within a narrow variation. Securoc® B products are developed as functional halogen-free flame retardant (HFFR) fillers for plastics and rubbers. Their flame retardant activity is primarily due to the endothermic decomposition of metal hydroxide (the heat sink effect) and the simultaneous release of water vapor. This reaction starts at about 300°C. Besides being flame retardant, they also possess a strong smoke-suppressing ability. These flame retardants are used in applications where processing temperatures exceed 200ºC, making ATH unsuitable. Its main uses are in wire and cable compounds, polyolefin roofing membranes, and electrical appliances based on thermoset compounds.

Mistroblock 6H-6HC is a bright, micro-lamellar talc with a finer size distribution compared to our standard Mistroblock® H product and was developed specifically for polyolefin film anti-blocking applications. It provides very good mechanical film properties with a minimum impact on film haze and clarity. Mistroblock® 6HC is the compacted form of Mistroblock® 6H and is recommended for maximum extruder throughput and minimum dust formation.

Portaflame® SG 30 LV is produced from carefully selected synthetic aluminum hydroxide (ATH). The standardized quality of Portaflame® SG 30 LV is guaranteed by means of an ISO 9001-certified quality management plan. The chemical composition of the raw material and the finished product is closely monitored, and the particle size is kept within a narrow variation. Portaflame® SG 30 LV is a "low viscosity" optimized grade with an exceptional low oil absorption value, giving the formulator the opportunity to achieve higher loading levels. Portaflame® SG 30 LV makes formulations that are flame retardant.

Mistron® ZSC is an off-white, high-purity, platy, fine talc that is surface treated for improved dispersion and hydrophobicity, as well as die lubrication in plastics and rubber applications. Additionally, it is used for microcellar foam nucleation in polymeric foams and for improving water resistance and electrical properties in wire and cable applications.

Artic Mist is an off-white, high-purity, extremely platy, very fine talc serving polymer, rubber, and coatings applications. Artic Mist® is recommended for excellent stiffness, HDT, and dimensional stability, as well as improved impact strength and esthetics in high-performance plastics, plastic nucleation, foamed plastics, plastic films, and wire and cable applications.

Mistroblock 6HT-6HTC is a bright, micro-lamellar talc with a finer size distribution compared to our standard Mistroblock® HT product, developed specifically for polyolefin film anti-blocking applications. It provides very good mechanical film properties with a minimum impact on film haze and clarity. Mistroblock® 6HT is surface modified for reduced interaction with processing aids and improved dispersion in masterbatch applications. Mistroblock® 6HTC is compacted to maximize extrusion throughput and minimize dust generation.

JetFil® T490 is an off-white, extremely platy talc. This product is used for enhancing stiffness, HDT, and dimensional stability in general-purpose plastics applications, including sheet and thermoformed plastics. It could also help in achieving good long-term thermal stability (heat aging).

MistroFoam is a lower-brightness, high-purity, platy, fine talc that is surface treated for improved dispersion and hydrophobicity, as well as die lubrication in plastics and rubber applications. Additionally, it is used for microcellar foam nucleation in polymeric foams and for improving water resistance and electrical properties in wire and cable applications.

JetFil® T-FDC is a functional mineral that meets the demanding impact resistance and dimensional stability specifications required in automotive applications, such as bumpers and body panels. The product is compacted to increase bulk density and allow maximum compounding throughput. Its compaction level has been adjusted to provide an optimum handling/redispersion balance.

JetFil® P350 is an off-white, high-purity, extremely platy talc with more than 98% talc content. This product is recommended for improving stiffness, HDT, and dimensional stability in general-purpose and commodity plastics applications. JetFil® P350 could also help in achieving good long-term thermal stability (heat aging).

JetFil® 575C is a functional mineral that meets the demanding impact resistance and dimensional stability specifications required in automotive applications, such as bumpers and body panels. The product is compacted to increase bulk density and allow maximum compounding throughput. Its compaction level has been adjusted to provide an optimum handling/redispersion balance.

JetFil® 700D is an off-white, high-purity, extremely platy, ultrafine talc with excellent top-size control that is recommended for excellent stiffness, HDT and dimensional stability, impact strength, and esthetics in high-performance plastics. It is also ideal for the nucleation of semi-crystalline plastics, plastic films, and foamed plastics. It is densified for reduced dust and ease of dispersion in low-shear extruders.

JetFil® M500c is a functional mineral that meets the demanding impact resistance and dimensional stability specifications required in automotive applications, such as bumpers and body panels. The product is compacted to increase bulk density and allow maximum compounding throughput. Its compaction level has been adjusted to provide an optimum handling/redispersion balance.

Nicron® 660 is an off-white, platy, high-purity, very fine talc, which is primarily used in paints and coatings. Nicron® 660 has excellent flatting characteristics, superior anti-settling properties, and is the product of choice in gel-coats. Nicron® 660 is used in rubber, wire, cable, and plastic applications.

Securoc® 014 is composed of 50 - 70% huntite, 30- 50% hydromadnesite, and less than 1% quartz. It is a white solid that decomposes at more than 250°C and has a pH of 10. This non-oxidizing product has various commercial and industrial uses.

JetFil® 750C is a functional mineral that meets the demanding impact resistance and dimensional stability specifications required in automotive applications, such as bumpers and body panels. The product is compacted to increase bulk density and allow maximum compounding throughput. Its compaction level has been adjusted to provide an optimum handling/redispersion balance.

Securoc® C10 is produced from a carefully selected, naturally occurring, platy sedimentary mineral that consists of partially hydrated magnesium-calcium carbonate. The standardized quality of Securoc® C10 is guaranteed by means of an ISO 9001-certified quality management plan. The chemical composition of the raw material and the finished product is closely monitored, and the particle size is kept within a narrow variation. Securoc® C10 is a very fine, platy-shaped filler that is flame and smoke retardant. In addition, this product works as an effective acid scavenger in halogen-containing polymers. It provides flame retardancy along with good smoke suppression and char formation, either by itself or in combination with ATH.