Knowde Enhanced TDS
Identification & Functionality
- Chemical Family
- Polymer Name
- Plastics & Elastomers Functions
- Technologies
Applications & Uses
- Markets
- Plastics & Elastomers Processing Methods
Properties
- Mechanical Properties
- Thermal Properties
- Other Properties
- Mechanical Properties (TPE)
- Rheological Properties
| Value | Units | Test Method / Conditions | |
| Strain at Break | >50 | % | ISO 527-1/-2 |
| Charpy Notched Impact Strength (at +23°C) | N | kJ/m² | ISO 179/1eA |
| Izod Notched Impact Strength (at +23°C) | N | kJ/m² | ISO 180/1A |
| Value | Units | Test Method / Conditions | |
| Melting Temperature (10°C/min) | 204 | °C | ISO 11357-1/-3 |
| Glass Transition Temperature (at 10°C/min) | -78 | °C | ISO 11357-1/-2 |
| Vicat Softening Temperature (50°C/h 50N) | 54 | °C | ISO 306 |
| Coefficient of Linear Thermal Expansion (parallel) | 2.2 | E-4/°C | ISO 11359-1/-2 |
| Coefficient of Linear Thermal Expansion (normal) | 2.2 | E-4/°C | ISO 11359-1/-2 |
| Value | Units | Test Method / Conditions | |
| Water Absorption in Water (at 23°C after 24h) | 0.88 | % | ISO 62 |
| Humidity Absorption | 1.19 | % | Sim. to ISO 62 |
| Density | 1180 | kg/m³ | ISO 1183 |
| Value | Units | Test Method / Conditions | |
| Tensile Modulus | 140 | MPa | ISO 527-1/-2 |
| Stress at 5% strain | 6.5 | MPa | ISO 527-1/-2 |
| Stress at 10% strain | 11 | MPa | ISO 527-1/-2 |
| Stress at 50% strain | 18 | MPa | ISO 527-1/-2 |
| Stress at 100% strain | 21 | MPa | ISO 527-1/-2 |
| Stress at Break | 24 | MPa | ISO 527-1/-2 |
| Nominal Strain at Break | 150 | % | ISO 527-1/-2 |
| Compression Set Under Constant Strain (at 70°C) | 37 | % | ISO 815 |
| Tear Strength | 123 | kN/m | ISO 34-1; Method B |
| Shore A Hardness (3s) | 97 | — | ISO 868 |
| Shore A Hardness (15s) | 97 | — | ISO 868 |
| Shore D Hardness (3s) | 51 | — | ISO 868 |
| Shore D Hardness (15s) | 51 | — | ISO 868 |
| Value | Units | Test Method / Conditions | |
| Melt Volume-Flow Rate (at 230 / * °C, 10 / * kg) | 7 | cm³/10min | ISO 1133 |
Regulatory & Compliance
- Certifications & Compliance
- Quality Standards
Technical Details & Test Data
- Stress-Strain
- Chemical Resistance
Chemical Type Chemical Name Resistance Other Acetic acid (10% by mass) at 23°C resistant Ketones Acetone at 23°C resistant Other Ammonium hydroxide (10% by mass) at 23°C limited resistant, tests necessary to verify Other ASTM 1 at 23°C resistant Other ASTM 3 at 23°C resistant Other Brake fluids (DOT 3/4) at 23°C not resistant Other Calcium chloride (10% by mass) at 23°C limited resistant, tests necessary to verify Other Chloroform at 23°C not resistant Ethers Diethyl ether at 23°C limited resistant, tests necessary to verify Alcohols Ethanol at 23°C limited resistant, tests necessary to verify Other Ethyl Acetate at 23°C limited resistant, tests necessary to verify Other Fuel; Diesel at 85°C resistant Other Hydrochloric acid (10% by mass) at 23°C resistant Other Hydrogen peroxide (30% by mass) at 23°C limited resistant, tests necessary to verify Other Nitric acid (10% by mass) at 23°C resistant Other Phosphoric acid (10% by mass) at 23°C resistant Other Sodium hydroxide (10% by mass) at 23°C resistant Other Sulfuric acid (30% by mass) at 23°C resistant Other Tetrachloroethylene at 23°C limited resistant, tests necessary to verify Hydrocarbons Toluene at 23°C resistant Other Transformer oil at 23°C not resistant Other Trichloroethylene at 23°C not resistant Other Water at 23°C resistant Other Zinc chloride (10% by mass) at 23°C resistant - Stress-Strain (TPE)
Packaging & Availability
- Packaging Type