Knowde Enhanced TDS
Identification & Functionality
- Chemical Family
- Product Type
- Technologies
- Product Families
Features & Benefits
Applications & Uses
- Markets
- Applications
- Product Applications
- It offers the excellent heat transfer, high voltage insulation and dimensional stability over a wide temperature range.
- As an encapsulant for power devices it distributes heat evenly throughout the casting, providing greater efficiency and longer working life.
- Excellent performance in densely packaged power supplies, integrated circuits, thick film hybrid devices, D/A converters, oscillators, amplifiers, relays, transformers and semiconductors etc.
- Instruction for Use
Stir well the contents of each container every time before removing material. If the contents are hard or lumpy, warm to 80°C and mix thoroughly before removing material.
1. Weigh each 100 grams of EC-1015 to 25 grams of Hardener EH-10.
2. Mix until uniform. Scrape the sides and bottom of container repeatedly during mixing.
3. Apply to clean bonding surfaces and cure as recommended to achieve the desired properties.
4. Typical cured properties were determined using recommended cure schedule. Some difference in properties may occur with the alternate or other cure schedules.- Industrial Usage
Practices of good housekeeping, safety and cleanliness should be followed before, during and after use.
Properties
- Color
- Typical Properties
- Typical Cured Properties
| Value | Units | Test Method / Conditions | |
| Mix Ratio by Weight (R/H) | 100/25 | — | — |
| Resin Viscosity (at 32°C) | 40000 | cPs | — |
| Mixed Viscocity (at 25°C) | 3000 - 5000 | cPs | — |
| Pot Life (at 25°C, 500g) | min. 8 | hours | — |
| Recommended Cure (at 70°C) | 2 | hours | — |
| Recommended Cure (at 150°C) | 2 | hours | — |
| Alternate Cure (at 100°C) | 4 | hours | — |
| Value | Units | Test Method / Conditions | |
| Specific Gravity | 1.95 | — | — |
| Hardness | 92 | Shore D | — |
| Linear Shrinkage | 0.3 | % | — |
| Water Absorption (24 hr at Room Temperature) | 0.04 | % | — |
| Thermal Conductivity | 1.2 | W/m °K | — |
| Service Temperature Range | 55 to 180 | °C | — |
| Glass Transition Temperature (Tg) | 145 | °C | — |
| Dielectric Strength | 450 | Volts/mil | — |
| Dielectric Constant (at 1 kHz, 25°C) | 4.73 | — | — |
| Dielectric Constant (at 1 kHz, 100°C) | 4.84 | — | — |
| Dissipation Factor (at 1 kHz, 25°C) | 0.01 | — | — |
| Dissipation Factor (at 1 kHz, 100°C) | 0.01 | — | — |
| Volume Resistivity (at 25°C) | 1x10^16 | Ω-cm | — |
| Volume Resistivity (at 100°C) | 1.5x10^15 | Ω-cm | — |
Safety & Health
- Warning
Adequate ventilation of workplace and ovens is essential.
Packaging & Availability
- Available Packaging
2 parts Kit - Packaged in Pint, Quart, Gallon, and 5- Gallon size.
Storage & Handling
- Shelf Life
The shelf life of these materials is greater than one year when stored in unopened containers at an average temperature of 25°C.