Products

EC-1012MFR-HT is a pourable, self-extinguishing, filled epoxy resin system featuring high thermal conductivity, good electrical insulation, and low shrinkage during cure. It is useful for potting and encapsulating components and modules where removal of heat and resistance to mechanical and thermal shock are prime considerations.

EPOXICAST-1006/EH-24 is a low viscosity, easily pourable, filled epoxy resin system featuring high thermal conductivity, good electrical insulation, and low shrinkage during cure. It is useful for potting and encapsulating components and modules where removal of heat and resistance to mechanical and thermal shock are prime considerations. The cured system provides excellent resistance to moisture, most organic solvents and inorganic chemicals.

UXP-052107-1 is a filled, two-part urethane resin system, which combines good handling characteristics with excellent cured properties. Its low viscosity allows good flowability and air release.

EC-1006M-4 is a low viscosity, easily pourable, filled epoxy resin system featuring high thermal conductivity, good electrical insulation, and low shrinkage during cure. It is useful for potting and encapsulating components and modules where removal of heat and resistance to mechanical and thermal shock are prime considerations. Typical Applications includes potting or encapsulating densely packaged power supplies, integrated circuits, small transformers, capacitors bushings etc.

EB-430-1HT is a highly versatile epoxy adhesive formulated for semiconductor industry. An easy to dispense liquid paste, it offers high heat transfer, low shrinkage and a coefficient of thermal expansion comparable to that of copper and aluminum. This adhesive is designed for protecting IC's in TAB, as well as glob-top encapsulant for COB placement. Other applications include fabricating heat sinks, bonding semiconductors and transistors to heat sinks and general-purpose bonding of electronic components.

UC-2521 is a filled, two-part urethane resin system, which combines good handling characteristics with excellent cured properties. Its low viscosity allows good flowability and air release. The cured elastomer has excellent water resistance and is exceptionally resistant to thermal shock.

UC-2524 is a filled, two-part urethane resin system, which combines good handling characteristics with excellent cured properties. Its low viscosity allows good flowability and air release. The cured elastomer has excellent water resistance and is exceptionally resistant to thermal shock.

EC-1009 is a pourable, filled epoxy resin system featuring high thermal conductivity, good electrical insulation, and low shrinkage during cure. It is useful for potting and encapsulating components and modules where removal of heat and resistance to mechanical and thermal shock are prime considerations.

UB-50 is a clear, two-part urethane resin system, which combines good handling characteristics with excellent cured properties. Its low viscosity allows good flowability and air release. The cured elastomer has excellent bond to metals, ceramics, and many plastics used in medical industry such as acrylic, polycarbonate, PVC etc. They also have excellent water resistance, and are exceptionally resistant to thermal shock. They can be used as an adhesive or for potting, casting and encapsulating applications.

UC-2356 is a two-part urethane resin system, which combines good handling characteristics with excellent cured properties. Its low viscosity allows for easy flow and air release and excellent hydrolytic stability. The cured elastomer has excellent water resistance and is exceptionally resistant to thermal shock.

EC-1015 is a low viscosity pourable filled epoxy resin system featuring high thermal conductivity, good electrical insulation, and low shrinkage during cure. It is useful for potting and encapsulating densely packaged electrical applications.

UC-2350 is a two-part urethane resin system, which combines good handling characteristics with excellent cured properties. Its low viscosity allows for easy flow and air release and excellent hydrolytic stability. The cured elastomer has excellent water resistance and is exceptionally resistant to thermal shock.

EC-1012M/EH-20M is a pourable, self-extinguishing, filled epoxy resin system featuring high thermal conductivity, good electrical insulation, and low shrinkage during cure. It is useful for potting and encapsulating components and modules where removal of heat and resistance to mechanical and thermal shock are prime considerations.

EC-1850FT with EH-10E Hardener is a very low viscosity pourable filled epoxy resin system featuring high thermal conductivity, good electrical insulation, and low shrinkage during cure. It is useful for potting and encapsulating densely packaged electrical applications.

EC-1030FL is a 2 component, flexible, high temperature epoxy potting compound. EC-1030FL offers an open work time at room temperature and cures at elevated temperatures. EC-1030FL can withstand temperatures of over 175°C and stays flexible at very low temperatures.

SC-454M-6 is a thermally conductive, low viscosity, condensation cure, RTV silicone potting or encapsulating compound. It is readily pourable and can cure at room temperature. The cured resin has a very good flexibility with excellent electrical properties and high temperature resistance.

UB-907FL is a two-component, industrial grade polyurethane adhesive system. Once cured, it forms a highly flexible bond line which provides peel and shear strength. It is deal for bonding a variety of metals, as well as plastics, glass, wood, and more. Can also be used for potting and encapsulating strain and heat sensitive electronic components.

SC-550-LV-TC-2 is a 100% silicone solid elastomer designed for electronic potting applications. This two-component system offers a hard, self-bonding, thermally conductive, low modulus material that is readily repairable. SC-550LV-TC-2 is highly filled and offers excellent thermal conductivity. It is also offers a convenient mix ratio of 1:1 by weight and volume.

UV-8403 is a low viscosity, light curing epoxy adhesive that bonds well to a wide variety of substrates including engineered plastics such as UltemTM, LexanTM, and ABS. This product exhibits good surface wetting and adhesion to glass and many plastics. UV-8403 cures to a clear polymer when properly cured. This product requires direct light exposure during cure. Because of the variability of different UV/LED light sources, it is suggested that the user test and specify intensity and exposure time. This product will cure in the presence of UVA light (310-365nm).

UV-5403S is a filled, low shrinkage, light curing epoxy adhesive that offers low CTE and high bonds strength. UV-5403S cures to a high bond strength polymer with excellent adhesive to metals, ceramics, and glass. This epoxy was specifically designed as a glob top encapsulant for smart card applications and encapsulations of chip modules. UV-5403S is free of solvents, has high ionic purity, and is resistant to moisture and humidity. This epoxy cures quickly under LED and UVA light.

UV-8311 is a low viscosity, fast curing, light curing epoxy adhesive that offers excellent strenth wetting properties. UV-8311 cures to a high Tg, rigid polymer with excellent adhesive to metals, ceramics, and glass.This product requires direct light exposure during cure. UV-8311 can cure fully in under 10 seconds using optimal cure conditions. Due to the variability of different UV/LED light sources, it is suggested that the user test and specify intensity and exposure time. This product will cures best in the UVA wavelengths

SC-550-LV-TC-1 is a 100% silicone solid elastomer designed for electronic potting applications. This two-component system offers a hard, self-bonding, thermally conductive, low modulus material that is readily repairable. SC-550LV-TC-1 is highly filled and offers excellent thermal conductivity. It is also offers a convenient mix ratio of 1:1 by weight and volume.

SC-550-LV-RT is a 100% silicone solid elastomer designed for electronic potting applications. This two-component, room temperature curing system offers a hard, self-bonding, thermally conductive, low modulus material that is readily re-workable.

SC-417 is a two-part, low viscosity, clear silicone which will cure at room temperature or at elevated temperatures. The cured elastomer is suited for electrical/electronic potting and encapsulating applications and provides environmental protection. It is readily pourable and can cure from room temperature to 200°C. The cured resin has a very good flexibility with excellent electrical properties and high temperature resistance.

FLASHBOND™ UV-3700F is a filled, low shrinkage, light curing epoxy adhesive that offers low CTE and high bonds strength. UV-3700F cures to a high Tg, rigid polymer with excellent adhesive to metals, ceramics, and glass. This filled system is excellent for when low viscosity systems are not ideal. Due to the variability of different UV/LED light sources, it is suggested that the user test and specify intensity and exposure time. This product will cure in the presence of visible light (400- 415nm).

STG-40 is a non-reactive, Silicone, Thermally Conductive Grease with a high thermal conductivity and low thermal resistance with a soft, non-flowable consistency. This product is formulated with specialty binding agents to achieve lowest amount of bleed and evaporations. It is designed for applications where a silicone thermal interface material is required and where the device may later need to be easily removed from the heat sink. This compound is ideally suited for use in thin cross-sectional thicknesses down to ≤1 mil.

EPOXIBOND™ EB-155 is an undiluted, unfilled, low viscosity clear epoxy system that exhibits exceptional resistance to impact and thermal shock. This system has low exotherm and long work life. Applications includes, high bond strength adhesive for most similar and dissimilar substrates; LED displays, any fiber optic application. It can also be used for making in-place laminates or for protective coating on metals etc. Also it can be used for semi-rigid, moisture proof, gas tight seals between plastic and metallic or other substrates. This is also recommended for potting devices such as connector shells from which rigid or flexible wires may protrude directly through the epoxy.

HTG-72TC is our highest temperature resistance thermal grease along with very high thermal conductivity. It is a heavily filled system with heat conductive metal oxides. This combination promotes high thermal conductivity, low bleed and high-temperature stability. These compounds resist changes in consistency at temperatures up to 360°C, maintaining a positive heat sink seal to improve heat transfer from the electronic device to the heat sink or chassis, thereby, increasing the overall efficiency of the device.

FLASHBOND™ UV-5402 is a low viscosity, flexible, light curing epoxy adhesive that offers excellent strenth and flexibility for reduced cracking. UV-5402 is low viscosity and high elongation. This product requires direct light exposure during cure. Because of the variability of different UV/LED light sources, it is suggested that the user test and specify intensity and exposure time. This product will cure in the presence of visible light (400-415nm) and can also cure down to 365nm.

TG-45LV is a specially formulated with low viscosity/screen printable consistency to achieve low BLT and high thermal conductivity for optimum thermal performance. Exhibits excellent resistance to pump out, outgassing and phase separation while eliminating concern of silicone deposition on optics and electronics within any package. TG-45LV is high performance thermal grease designed to meet the thermal, reliability and low-price requirements of high-end chipset, graphic processors trend ever-faster clock speeds. RoHS compliant and halogen -free

SetWORX™ 1510 is a fast setting, toughened epoxy adhesive designed for industrial grade applications. This epoxy system has 1:1 mixing ratio by volume & cure fast at room temperature. When cured it is resistant to a wide range of chemicals and solvents, and acts as an excellent electrical insulator. The cured adhesive exhibits high impact resistance and exceptional bond strength. It can be used for bonding glass, metals, woods and some plastics.

TG-69 compound grease-like NON-SILICONE, NON- FLOWABLE material heavily filled with heat-conductive metal oxides. These combinations provide high thermal conductivity, low bleed and high temperature stability. TG-69 has been engineered to solve the problems of contamination and migration associated with silicone-based products. Unique polysynthetic-based thermal grease used to insure quick, efficient heat transfer and dissipation for the full operational life of your hardware.

EC-1190 is an epoxy encapsulating system with a very low density for use in the aerospace and medical industries. EC-1190 is low viscosity and can cure at room temperature when used with catalyst EH-21. EC-1190 has excellent chemical resistance and a low coefficient of thermal expansion (CTE).

SETWORX™ 60 is a toughened, high strength, structural epoxy adhesive. This adhesive has an excellent combination of shear and peel strength. It has also excellent impact and vibration resistance and low temperature flexibility. This high performance epoxy adhesive exhibits very good physical, thermal, and electrical insulation properties.

FLASHBOND™ UV-8504E is a low viscosity, fast curing, light-curing epoxy adhesive that offers excellent strength wetting properties. UV-8504E cures to a high Tg, rigid polymer with excellent adhesive to metals, ceramics, and glass.This product requires direct light exposure during cure. UV-8504E can cure fully in 30 seconds using optimal cure conditions. Due to the variability of different UV/LED light sources, it is suggested that the user test and specify intensity and exposure time. This product will cures best in the UVA wavelengths (315-365nm). FLASHBOND™ UV-8504E has been tested to and passes ISO-10993-5 standards for cytotoxicity.

EPOXIBOND™ EB-107LY is a two-part, low viscosity, clear epoxy adhesive and encapsulating material. EB-107LY is a low yellowing version of EB-107LP-2. It is recommended for bonding and encapsulating where reduced yellowing is preferred. It is recommended for joining transparent materials, such as glass, and where a thin bond line is desired. EB-107LY can be used for bonding most metals, ceramics, and some plastics.