Products

EC-1012MFR-HT is a pourable, self-extinguishing, filled epoxy resin system featuring high thermal conductivity, good electrical insulation, and low shrinkage during cure. It is useful for potting and encapsulating components and modules where removal of heat and resistance to mechanical and thermal shock are prime considerations.

EPOXICAST-1006/EH-24 is a low viscosity, easily pourable, filled epoxy resin system featuring high thermal conductivity, good electrical insulation, and low shrinkage during cure. It is useful for potting and encapsulating components and modules where removal of heat and resistance to mechanical and thermal shock are prime considerations. The cured system provides excellent resistance to moisture, most organic solvents and inorganic chemicals.

UXP-052107-1 is a filled, two-part urethane resin system, which combines good handling characteristics with excellent cured properties. Its low viscosity allows good flowability and air release.

EC-1006M-4 is a low viscosity, easily pourable, filled epoxy resin system featuring high thermal conductivity, good electrical insulation, and low shrinkage during cure. It is useful for potting and encapsulating components and modules where removal of heat and resistance to mechanical and thermal shock are prime considerations. Typical Applications includes potting or encapsulating densely packaged power supplies, integrated circuits, small transformers, capacitors bushings etc.

EB-430-1HT is a highly versatile epoxy adhesive formulated for semiconductor industry. An easy to dispense liquid paste, it offers high heat transfer, low shrinkage and a coefficient of thermal expansion comparable to that of copper and aluminum. This adhesive is designed for protecting IC's in TAB, as well as glob-top encapsulant for COB placement. Other applications include fabricating heat sinks, bonding semiconductors and transistors to heat sinks and general-purpose bonding of electronic components.

UC-2521 is a filled, two-part urethane resin system, which combines good handling characteristics with excellent cured properties. Its low viscosity allows good flowability and air release. The cured elastomer has excellent water resistance and is exceptionally resistant to thermal shock.

UC-2524 is a filled, two-part urethane resin system, which combines good handling characteristics with excellent cured properties. Its low viscosity allows good flowability and air release. The cured elastomer has excellent water resistance and is exceptionally resistant to thermal shock.

EC-1009 is a pourable, filled epoxy resin system featuring high thermal conductivity, good electrical insulation, and low shrinkage during cure. It is useful for potting and encapsulating components and modules where removal of heat and resistance to mechanical and thermal shock are prime considerations.

UB-50 is a clear, two-part urethane resin system, which combines good handling characteristics with excellent cured properties. Its low viscosity allows good flowability and air release. The cured elastomer has excellent bond to metals, ceramics, and many plastics used in medical industry such as acrylic, polycarbonate, PVC etc. They also have excellent water resistance, and are exceptionally resistant to thermal shock. They can be used as an adhesive or for potting, casting and encapsulating applications.

UC-2356 is a two-part urethane resin system, which combines good handling characteristics with excellent cured properties. Its low viscosity allows for easy flow and air release and excellent hydrolytic stability. The cured elastomer has excellent water resistance and is exceptionally resistant to thermal shock.

EC-1015 is a low viscosity pourable filled epoxy resin system featuring high thermal conductivity, good electrical insulation, and low shrinkage during cure. It is useful for potting and encapsulating densely packaged electrical applications.

UC-2350 is a two-part urethane resin system, which combines good handling characteristics with excellent cured properties. Its low viscosity allows for easy flow and air release and excellent hydrolytic stability. The cured elastomer has excellent water resistance and is exceptionally resistant to thermal shock.

EC-1012M/EH-20M is a pourable, self-extinguishing, filled epoxy resin system featuring high thermal conductivity, good electrical insulation, and low shrinkage during cure. It is useful for potting and encapsulating components and modules where removal of heat and resistance to mechanical and thermal shock are prime considerations.

EC-1850FT with EH-10E Hardener is a very low viscosity pourable filled epoxy resin system featuring high thermal conductivity, good electrical insulation, and low shrinkage during cure. It is useful for potting and encapsulating densely packaged electrical applications.

EC-1030FL is a 2 component, flexible, high temperature epoxy potting compound. EC-1030FL offers an open work time at room temperature and cures at elevated temperatures. EC-1030FL can withstand temperatures of over 175°C and stays flexible at very low temperatures.

SC-454M-6 is a thermally conductive, low viscosity, condensation cure, RTV silicone potting or encapsulating compound. It is readily pourable and can cure at room temperature. The cured resin has a very good flexibility with excellent electrical properties and high temperature resistance.

UB-907FL is a two-component, industrial grade polyurethane adhesive system. Once cured, it forms a highly flexible bond line which provides peel and shear strength. It is deal for bonding a variety of metals, as well as plastics, glass, wood, and more. Can also be used for potting and encapsulating strain and heat sensitive electronic components.

SC-550-LV-TC-2 is a 100% silicone solid elastomer designed for electronic potting applications. This two-component system offers a hard, self-bonding, thermally conductive, low modulus material that is readily repairable. SC-550LV-TC-2 is highly filled and offers excellent thermal conductivity. It is also offers a convenient mix ratio of 1:1 by weight and volume.

UV-8403 is a low viscosity, light curing epoxy adhesive that bonds well to a wide variety of substrates including engineered plastics such as UltemTM, LexanTM, and ABS. This product exhibits good surface wetting and adhesion to glass and many plastics. UV-8403 cures to a clear polymer when properly cured. This product requires direct light exposure during cure. Because of the variability of different UV/LED light sources, it is suggested that the user test and specify intensity and exposure time. This product will cure in the presence of UVA light (310-365nm).

UV-8311 is a low viscosity, fast curing, light curing epoxy adhesive that offers excellent strenth wetting properties. UV-8311 cures to a high Tg, rigid polymer with excellent adhesive to metals, ceramics, and glass.This product requires direct light exposure during cure. UV-8311 can cure fully in under 10 seconds using optimal cure conditions. Due to the variability of different UV/LED light sources, it is suggested that the user test and specify intensity and exposure time. This product will cures best in the UVA wavelengths

SC-550-LV-TC-1 is a 100% silicone solid elastomer designed for electronic potting applications. This two-component system offers a hard, self-bonding, thermally conductive, low modulus material that is readily repairable. SC-550LV-TC-1 is highly filled and offers excellent thermal conductivity. It is also offers a convenient mix ratio of 1:1 by weight and volume.

SC-550-LV-RT is a 100% silicone solid elastomer designed for electronic potting applications. This two-component, room temperature curing system offers a hard, self-bonding, thermally conductive, low modulus material that is readily re-workable.

SC-417 is a two-part, low viscosity, clear silicone which will cure at room temperature or at elevated temperatures. The cured elastomer is suited for electrical/electronic potting and encapsulating applications and provides environmental protection. It is readily pourable and can cure from room temperature to 200°C. The cured resin has a very good flexibility with excellent electrical properties and high temperature resistance.

EC-1190 is an epoxy encapsulating system with a very low density for use in the aerospace and medical industries. EC-1190 is low viscosity and can cure at room temperature when used with catalyst EH-21. EC-1190 has excellent chemical resistance and a low coefficient of thermal expansion (CTE).

EPOXIBOND™ EB-107LY is a two-part, low viscosity, clear epoxy adhesive and encapsulating material. EB-107LY is a low yellowing version of EB-107LP-2. It is recommended for bonding and encapsulating where reduced yellowing is preferred. It is recommended for joining transparent materials, such as glass, and where a thin bond line is desired. EB-107LY can be used for bonding most metals, ceramics, and some plastics.

SETWORX™ UV-35G is an epoxy adhesive and encapsulating compound designed for electronic, optical, medical, and general industrial applications Once mixed, UV-35G will polymerize and gel instantaneously upon exposure to UV light reducing fixture time to seconds. Once gelled, UV-35G will continue to cure at room temperature or at elevated temperature until fully cured. This epoxy system has 2 to 1 mixing ratio by volume and is available in easy to us dual cartridge systems.

EC-1106 is an electronic grade Optically Clear Epoxy, Encapsulating and Potting Compound. This heat curing system has very low viscosity and long work life.

EP-207 is two parts, ambient temperature-cure, epoxy potting and encapsulating system. This semi-rigid system has excellent shock & vibration resistance and good thermal conductivity.

EPOXIBOND™ EB-109M-11 is a flexible, two components, low viscosity, clear epoxy adhesive for optical, medical, and semiconductor applications. This long working life adhesive can be cured at room temperature or with moderate heat and provides excellent adhesion to glass, quartz, metals, wood and most plastics.

EPOXIBOND™ EB-107LP-1 is a two component, room temperature curing epoxy featuring very low viscosity, and excellent optical-mechanical properties.

FLASHBOND™ UV-3607HTis a 1-component, UV/Thermal cure adhesive & sealant. This material can cure under moderate intensity UV light as well as elevated temperatures for shadowed areas. Its low viscosity is ideal for coating, capillary action, and doming applications. Unlike traditional dual cure epoxy systems which need light + heat, UV-3607HT can cure either with UV/LED light or with heat.

EB-155 is an undiluted, unfilled, low viscosity clear epoxy system that exhibits exceptional resistance to impact and thermal shock. This system has low exotherm and long work life. Applications includes, high bond strength adhesive for most similar and dissimilar substrates; LED displays, any fiber optic application. It can also be used for making in-place laminates or for protective coating on metals etc. Also it can be used for semi-rigid, moisture proof, gas tight seals between plastic and metallic or other substrates. This is also recommended for potting devices such as connector shells from which rigid or flexible wires may protrude directly through the epoxy.

EC-1850FT is a pourable filled epoxy resin system offering excellent heat transfer, high voltage insulation, low exotherm and minimum shrinkage. It is a lower viscosity version of EC-1850FT. It rapidly transfers heat, eliminates hot spot, and increases the operating efficiency of most encapsulated devices. Its low shrinkage minimizes risk of damage to fragile components.