company tower banner
EpoxySet Inc. Company Logo

EpoxySet Inc. EB-126HT

EB-126HT is two components, clear epoxy system. This long work life, low viscosity resin system is designed for the bonding, coating, sealing, and impregnation of electrical and structural components. The cured system has excellent electrical and physical properties above 250°C with outstanding high temperature stability. It also provides excellent moisture, chemical, and corrosion resistance as well as resistance to thermal and mechanical shock.

Product Type: 2K (2 component) Adhesive

Application Area: Electrical Components

Chemical Family: Bisphenol Epoxy Resins, Bisphenol F Type Epoxy, Epoxy & Epoxy Derivatives, Novolac Epoxy

Technical Data Sheet

Similar Products

  • TypeDocument Name
View All Documents

Knowde Enhanced TDS

Identification & Functionality

Features & Benefits

Applications & Uses

Application Area
Instruction for Use
  1. Weigh 100 grams of Resin (PART-A) with 100 grams of Hardener (PART-B).
  2. Mix thoroughly until uniform mix and vacuum degas.
  3. Cure as recommended to achieve the desired properties.
  4. Typical cured properties were determined using recommended cure schedule. Some difference in properties may occur with the alternate or other cure schedules.
Industrial Usage

These materials are intended for industrial use only, and the practices of good housekeeping, safety and cleanliness should be followed before, during and after use.

Properties

Typical Properties
ValueUnitsTest Method / Conditions
Mixed Viscocity8000 - 11000cPs
Pot Life (at 25°C, 500g)8hours
Recommended Cure (at 100°C)2hours
Recommended Cure (at 150°C)4hours
Alternate Cure (at 125°C)4hours
Typical Cured Properties
ValueUnitsTest Method / Conditions
Specific Giravity1.2
Hardness92Shore A
Tensile Strength10000psi
Glass Transition Temperature (Tg)140°C
Service Temperature Range (Continuous)-55 to 300°C
Service Temperature Range (Intermittent)-55 to 350°C
Dielectric Constant (at 60 Hz)2.8
Dissipation Factor (at 60 Hz)0.008
Volume Resistivity1x10^16Ω-cm

Regulatory & Compliance

Certifications & Compliance

Safety & Health

Warning

Although the system contains low volatility materials, care should be taken in handling. Adequate ventilation of work place and ovens is essential. These materials may cause
injury to the skin following prolonged or repeated contact and dermatitis in susceptible individuals. In case of skin contact, wash thoroughly with soap and water. For eyes, flush immediately with plenty of water for at least 10 minutes and seek medical attention.

Packaging & Availability

Packaging Type
Available Packaging
  • Pint, Quarts, Gallons, 5-gallon Pails, 55-gallon drums 50mL, 200mL, 400mL dual cartridges
  • Premixed & Frozen: 3ml, 10ml, 30ml syringes

Storage & Handling

Shelf Life

The shelf life of these materials is greater than one year when stored in unopened containers at an average temperature of 25°C.