Knowde Enhanced TDS
Identification & Functionality
- Chemical Family
- Product Type
- Technologies
- Product Families
Features & Benefits
Applications & Uses
- Applications
- Application Area
- Compatible Polymers & Resins
- Cure Method
- Product Applications
It is UL-94V-0 (1/4" thickness) certified (File No: E198161). This low viscosity with a convenient mix ratio of 1:1 by volume is specifically designed for submersible pumps, and also can be used for low to medium voltage electrical potting applications such as ballast, starters, electronic timers etc.
- Instruction for Use
The individual components containing fillers should be stirred or agitated without introducing excessive air before use to ensure that all fillers are properly dispersed. To obtain the best cured properties; accurate proportioning and thorough mixing are essential.
1. Mix contents thoroughly each time before removing material.
2. To each 100 grams of PART-A to 96.5 grams of PART-B or 1 to 1 by volume, and mix it well preferably using a mechanical mixer.
3. Vacuum degasses for about five minutes to remove any dissolved or entrapped air.
4. Proceed with the casting or potting application and cure as recommended.
Properties
- Flame Rating
- Typical Properties
- Typical Cured Properties
Value | Units | Test Method / Conditions | |
Mix Ratio (By Weight, Part A/Part B) | 100/96.5 | — | — |
Mix Ratio (By Volume, Part A/Part B) | 100/100 | — | — |
MIxed Viscocity (at 25°C) | 8000 - 12000 | cPs | — |
Pot Life (at 25°C, 100g) | 2 | hours | — |
Recommended Cure (at 25°C) | 5 - 7 | days | — |
Alternate Cure (at 65°C) | 2 | hours | — |
Value | Units | Test Method / Conditions | |
Specific Gravity | 1.55 | — | — |
Hardness | 76 | Shore D | — |
Linear Shrinkage | 0.035 | % | — |
Water Absorption (168 hr at Room Temperature) | 0.31 | % | — |
Thermal Conductivity | 6 | W/m °K | — |
Service Temperature Range | -55 to 125 | °C | — |
Dielectric Strength | 415 | Volts/mil | — |
Dielectric Constant (at 1 kHz) | 3.9 | — | — |
Dissipation Factor (at 1 kHz) | 0.02 | — | — |
Volume Resistivity | 3x10^14 | Ω-cm | — |
Regulatory & Compliance
- Certifications & Compliance
Safety & Health
- Warning
Although the system contains low volatility materials, care should be taken in handling. Adequate ventilation of work place and ovens is essential. These materials may cause injury to the skin following prolonged or repeated contact and dermatitis in susceptible individuals.
Storage & Handling
- Shelf Life
The shelf life of these materials is greater than one year when stored in unopened containers at an average temperature of 25°C.