Knowde Enhanced TDS
Identification & Functionality
- Base Oil Type
- Chemical Family
- Product Type
- Technologies
- Product Families
Features & Benefits
- Labeling Claims
- Ready-to-Use Product Features
- Key Features and Benefits
- High temperature resistance.
- Exceptionally low Interface Thermal Resistance.
- High Thermal Conductivity, High dielectric
- strength.
- Exceptionally low bleed and evaporation.
- Thin Bondlines of 1-2 mil
- Will not harden, dry out or melt.
- Will not contaminate solder bath.
- Non-Toxic.
Applications & Uses
- Applications
- Application Area
- Major Application
Heat sink compound is applied to the base and mounting studs of transistors, diodes and silicone controlled rectifiers. In these situations, a small amount of thermal grease using either dispensing or screen printing/stencil is best. It has also been used as a high- voltage corona suppressant, non-flammable coating in connections for fly back transformers in TV sets and similar applications. It also used in mounting semiconductor devises; mounting power transistors and diodes; coupling entire heat generating assemblies to chassis; heat transfer medium on ballast; thermal joints; thermocouple wells; mounting power resistors; for any device where efficient cooling is required; major industries served include electronic (computer, appliance, wireless, etc.), automotive, electrical.
- Clean Up
It is recommended that customer use disposable containers and utensils whenever possible to simplify clean up. However, when disposable containers are impractical, STG-51TC can be removed by cleaning equipments with such as Mineral spirit (Paint thinner), Hexane or Isopropyl alcohol. Observe appropriate precautions.
Properties
- Typical Properties
- Thermal Properties
- Electrical Properties
Value | Units | Test Method / Conditions | |
Viscosity | 70000 | cPs | — |
Specific Gravity (at 25°C) | 2.2 | — | — |
Thermal Conductivity | 3.2 | W/m °K | ASTM D5470 |
Operating Temperature Range | -55 to 205 | °C | — |
Value | Units | Test Method / Conditions | |
Thermal Resistance | 0.014 | °C-In/W | — |
Value | Units | Test Method / Conditions | |
Dielectric Strength (0.05" gap) | 225 | Volts/mil | — |
Dielectric Constant (at 25°C, 1 KHz) | 2.8 | — | ASTM D150 |
Dissipation Factor (at 25°C, 1000 Hz.) | 0.0026 | — | ASTM D150 |
Volume Resistivity | 1.8x 10^14 | Ω-cm | ASTM D257 |
Volume Resistivity | 1.0x 10^10 | Ω-cm | — |
Regulatory & Compliance
- Certifications & Compliance
Storage & Handling
- Shelf Life
- 5 Years
- Shelf Life
STG-51TC has self-life of 5 years at room temperature (25°C) in unopened containers. Slight settling of the filler may occur during long-term storage. In this case, it is recommended to refrigerate material at 0-10°C to avoid any settling.