Products

SC-454M-6 is a thermally conductive, low viscosity, condensation cure, RTV silicone potting or encapsulating compound. It is readily pourable and can cure at room temperature. The cured resin has a very good flexibility with excellent electrical properties and high temperature resistance.

UB-907FL is a two-component, industrial grade polyurethane adhesive system. Once cured, it forms a highly flexible bond line which provides peel and shear strength. It is deal for bonding a variety of metals, as well as plastics, glass, wood, and more. Can also be used for potting and encapsulating strain and heat sensitive electronic components.

SC-550-LV-TC-2 is a 100% silicone solid elastomer designed for electronic potting applications. This two-component system offers a hard, self-bonding, thermally conductive, low modulus material that is readily repairable. SC-550LV-TC-2 is highly filled and offers excellent thermal conductivity. It is also offers a convenient mix ratio of 1:1 by weight and volume.

UV-8403 is a low viscosity, light curing epoxy adhesive that bonds well to a wide variety of substrates including engineered plastics such as UltemTM, LexanTM, and ABS. This product exhibits good surface wetting and adhesion to glass and many plastics. UV-8403 cures to a clear polymer when properly cured. This product requires direct light exposure during cure. Because of the variability of different UV/LED light sources, it is suggested that the user test and specify intensity and exposure time. This product will cure in the presence of UVA light (310-365nm).

UV-5403S is a filled, low shrinkage, light curing epoxy adhesive that offers low CTE and high bonds strength. UV-5403S cures to a high bond strength polymer with excellent adhesive to metals, ceramics, and glass. This epoxy was specifically designed as a glob top encapsulant for smart card applications and encapsulations of chip modules. UV-5403S is free of solvents, has high ionic purity, and is resistant to moisture and humidity. This epoxy cures quickly under LED and UVA light.

UV-8311 is a low viscosity, fast curing, light curing epoxy adhesive that offers excellent strenth wetting properties. UV-8311 cures to a high Tg, rigid polymer with excellent adhesive to metals, ceramics, and glass.This product requires direct light exposure during cure. UV-8311 can cure fully in under 10 seconds using optimal cure conditions. Due to the variability of different UV/LED light sources, it is suggested that the user test and specify intensity and exposure time. This product will cures best in the UVA wavelengths

SC-550-LV-TC-1 is a 100% silicone solid elastomer designed for electronic potting applications. This two-component system offers a hard, self-bonding, thermally conductive, low modulus material that is readily repairable. SC-550LV-TC-1 is highly filled and offers excellent thermal conductivity. It is also offers a convenient mix ratio of 1:1 by weight and volume.

SC-550-LV-RT is a 100% silicone solid elastomer designed for electronic potting applications. This two-component, room temperature curing system offers a hard, self-bonding, thermally conductive, low modulus material that is readily re-workable.

SC-417 is a two-part, low viscosity, clear silicone which will cure at room temperature or at elevated temperatures. The cured elastomer is suited for electrical/electronic potting and encapsulating applications and provides environmental protection. It is readily pourable and can cure from room temperature to 200°C. The cured resin has a very good flexibility with excellent electrical properties and high temperature resistance.

FLASHBOND™ UV-3700F is a filled, low shrinkage, light curing epoxy adhesive that offers low CTE and high bonds strength. UV-3700F cures to a high Tg, rigid polymer with excellent adhesive to metals, ceramics, and glass. This filled system is excellent for when low viscosity systems are not ideal. Due to the variability of different UV/LED light sources, it is suggested that the user test and specify intensity and exposure time. This product will cure in the presence of visible light (400- 415nm).

STG-40 is a non-reactive, Silicone, Thermally Conductive Grease with a high thermal conductivity and low thermal resistance with a soft, non-flowable consistency. This product is formulated with specialty binding agents to achieve lowest amount of bleed and evaporations. It is designed for applications where a silicone thermal interface material is required and where the device may later need to be easily removed from the heat sink. This compound is ideally suited for use in thin cross-sectional thicknesses down to ≤1 mil.

EPOXIBOND™ EB-155 is an undiluted, unfilled, low viscosity clear epoxy system that exhibits exceptional resistance to impact and thermal shock. This system has low exotherm and long work life. Applications includes, high bond strength adhesive for most similar and dissimilar substrates; LED displays, any fiber optic application. It can also be used for making in-place laminates or for protective coating on metals etc. Also it can be used for semi-rigid, moisture proof, gas tight seals between plastic and metallic or other substrates. This is also recommended for potting devices such as connector shells from which rigid or flexible wires may protrude directly through the epoxy.

HTG-72TC is our highest temperature resistance thermal grease along with very high thermal conductivity. It is a heavily filled system with heat conductive metal oxides. This combination promotes high thermal conductivity, low bleed and high-temperature stability. These compounds resist changes in consistency at temperatures up to 360°C, maintaining a positive heat sink seal to improve heat transfer from the electronic device to the heat sink or chassis, thereby, increasing the overall efficiency of the device.

FLASHBOND™ UV-5402 is a low viscosity, flexible, light curing epoxy adhesive that offers excellent strenth and flexibility for reduced cracking. UV-5402 is low viscosity and high elongation. This product requires direct light exposure during cure. Because of the variability of different UV/LED light sources, it is suggested that the user test and specify intensity and exposure time. This product will cure in the presence of visible light (400-415nm) and can also cure down to 365nm.

TG-45LV is a specially formulated with low viscosity/screen printable consistency to achieve low BLT and high thermal conductivity for optimum thermal performance. Exhibits excellent resistance to pump out, outgassing and phase separation while eliminating concern of silicone deposition on optics and electronics within any package. TG-45LV is high performance thermal grease designed to meet the thermal, reliability and low-price requirements of high-end chipset, graphic processors trend ever-faster clock speeds. RoHS compliant and halogen -free

SetWORX™ 1510 is a fast setting, toughened epoxy adhesive designed for industrial grade applications. This epoxy system has 1:1 mixing ratio by volume & cure fast at room temperature. When cured it is resistant to a wide range of chemicals and solvents, and acts as an excellent electrical insulator. The cured adhesive exhibits high impact resistance and exceptional bond strength. It can be used for bonding glass, metals, woods and some plastics.

TG-69 compound grease-like NON-SILICONE, NON- FLOWABLE material heavily filled with heat-conductive metal oxides. These combinations provide high thermal conductivity, low bleed and high temperature stability. TG-69 has been engineered to solve the problems of contamination and migration associated with silicone-based products. Unique polysynthetic-based thermal grease used to insure quick, efficient heat transfer and dissipation for the full operational life of your hardware.

SETWORX™ 60 is a toughened, high strength, structural epoxy adhesive. This adhesive has an excellent combination of shear and peel strength. It has also excellent impact and vibration resistance and low temperature flexibility. This high performance epoxy adhesive exhibits very good physical, thermal, and electrical insulation properties.

FLASHBOND™ UV-8504E is a low viscosity, fast curing, light-curing epoxy adhesive that offers excellent strength wetting properties. UV-8504E cures to a high Tg, rigid polymer with excellent adhesive to metals, ceramics, and glass.This product requires direct light exposure during cure. UV-8504E can cure fully in 30 seconds using optimal cure conditions. Due to the variability of different UV/LED light sources, it is suggested that the user test and specify intensity and exposure time. This product will cures best in the UVA wavelengths (315-365nm). FLASHBOND™ UV-8504E has been tested to and passes ISO-10993-5 standards for cytotoxicity.

TG-61 is Non-Silicone thermal grease is exceptionally soft, non-silicone thermal grease. In addition to solving the problems of contamination and migration associated with traditional silicone-based thermal grease, this unique material can be spread into an extremely thin film while remaining a homogenous mixture.

STG-51TC Heat Sink Compound is silicone thermal grease material heavily filled with heat-conductive metal oxides. These combinations provide high thermal conductivity, low bleed and high temperature stability. STG-51TC specially developed to solve the problems of contamination and migration associated with silicone-based products. The compound is a unique synthetic-based thermal grease use to insure quick, efficient heat transfer and dissipation

FLASHBOND™ UV-8300LV is a low viscosity, light curing epoxy adhesive that bonds well to a wide variety of substrates including metals, glass, ceramics and some plastics. This product exhibits good surface wetting and adhesion to glass and many plastics. This product requires direct light exposure during cure. Because of the variability of different UV/LED light sources, it is suggested that the user test and specify intensity and exposure time. This product will cure in the presence of visible light (405nm) as well as down to 365nm. Flashbond UV-8300LV has been tested to and passes ISO-10993-5 for cytotoxicity.

STG-41 is a non-reactive, Silicone, Thermally Conductive Grease with a high thermal conductivity and low thermal resistance with a soft, non-flowable consistency. This product is formulated with specialty binding agents to achieve lowest amount of bleed and evaporations. It is designed for applications where a silicone thermal interface material is required and where the device may later need to be easily removed from the heat sink. This compound is ideally suited for use in thin cross-sectional thicknesses down to ≤ 1 mil.

EPOXIBOND™ EB-177 is a low viscosity, high Tg, two part epoxy that can be used for potting, encapsulating, or bonding. It is used highly in the medical, optical, and semiconductor industries.EB-177 has excellent high temperature resistance at 300°C and excellent solvent, chemical, and moisture resistance including gamma rays, autoclave, and ETO. It is an excellent choice for semiconductor applications including capillary under fill or flipchip die attach.

TG-62M is Non-Silicone thermal grease is exceptionally soft, non-silicone thermal grease. In addition to solving the problems of contamination and migration associated with traditional silicone-based thermal grease, this unique material can be spread into an extremely thin film while remaining a homogenous mixture.

SetWORX 90 is a toughened, high strength, structural epoxy adhesive. This adhesive has an excellent combination of shear and peel strength. It has also excellent impact and vibration resistance and low temperature flexibility. This high performance epoxy adhesive exhibits very good physical, thermal, and electrical insulation properties. It is recommended for bonding engineering thermoplastics, SMC (sheet molding compounds) in aerospace and automotive applications. SetWORX 90 is BPA-Free and non-hazardous for shipping.

EPOXIBOND™ EB-109M-11 is a flexible, two components, low viscosity, clear epoxy adhesive for optical, medical, and semiconductor applications. This long working life adhesive can be cured at room temperature or with moderate heat and provides excellent adhesion to glass, quartz, metals, wood and most plastics.

SetWORX™ 05 is a fast cure, high strength, structural epoxy adhesive. This adhesive has an excellent combination of shear and peel strength. It has also excellent impact and vibration resistance and low temperature flexibility. This high performance epoxy adhesive exhibits very good physical, thermal, and electrical insulation properties. The high performance epoxy provides excellent bond strengths to a wide variety of plastics and metals.

UVX‐070219 is a low viscosity, fast curing urethane acrylate that bonds well to engineered plastics and metal substrates. This product requires direct UV exposure during cure. Because of the variability of different UV light sources it is suggested that the user test and specify UV intensity and exposure time. This material is specially formulated to have reduces surface tack due to oxygen inhibition.

FLASHBOND™ UV-3607HTis a 1-component, UV/Thermal cure adhesive & sealant. This material can cure under moderate intensity UV light as well as elevated temperatures for shadowed areas. Its low viscosity is ideal for coating, capillary action, and doming applications. Unlike traditional dual cure epoxy systems which need light + heat, UV-3607HT can cure either with UV/LED light or with heat.

UV-8509R is a non-sag, fast curing, urethane acrylate that bonds well to engineered plastics and metal based substrates. This product requires direct UV exposure during cure. Because of the variability of different UV light sources it is suggested that the user test and specify UV intensity and exposure time. This material is specially formulated to have reduced surface tack due to oxygen inhibition.

EPOXIBOND™ EB-116 is high strength, structural epoxy adhesive. This tough adhesive has an excellent combination of shear and peel strength. It has also excellent impact and vibration resistance and low temperature flexibility. This high-performance epoxy adhesive exhibits very good physical, thermal, and electrical insulation properties and is excellent for cryogenic applications. It is recommended for bonding glass, metal, ceramics, and engineering thermoplastics. Due to its low viscosity, it can be also used for potting and encapsulating electrical/electronic coponents

SetWORX™ 411HP is a toughened, high strength, industrial grade structural epoxy adhesive. This adhesive has an excellent combination of shear and peel strength. 411HP is a one component, heat cure, conductive epoxy adhesive. It has also excellent impact and vibration resistance and low temperature flexibility. This high-performance epoxy adhesive exhibits very good physical, thermal, and electrical insulation properties. It is recommended for bonding engineering thermoplastics, SMC (sheet molding compounds) in aerospace and automotive applications.

HTG-71 is a high temperature resistance thermal grease,, heavily filled with heat conductive metal oxides. This combination promotes high thermal conductivity, low bleed and high-temperature stability. These compounds resist changes in consistency at temperatures up to 300°C, maintaining a positive heat sink seal to improve heat transfer from the electronic device to the heat sink or chassis, thereby, increasing the overall efficiency of the device.

TG-64 is Non-Silicone thermal grease is exceptionally soft, non-silicone thermal grease. In addition to solving the problems of contamination and migration associated with traditional silicone-based thermal grease, this unique material can be spread into an extremely thin film while remaining a homogenous mixture.

EB-155 is an undiluted, unfilled, low viscosity clear epoxy system that exhibits exceptional resistance to impact and thermal shock. This system has low exotherm and long work life. Applications includes, high bond strength adhesive for most similar and dissimilar substrates; LED displays, any fiber optic application. It can also be used for making in-place laminates or for protective coating on metals etc. Also it can be used for semi-rigid, moisture proof, gas tight seals between plastic and metallic or other substrates. This is also recommended for potting devices such as connector shells from which rigid or flexible wires may protrude directly through the epoxy.