Knowde Enhanced TDS
Identification & Functionality
- Product Type
- Technologies
- Product Families
Features & Benefits
- Labeling Claims
- Ready-to-Use Product Features
Applications & Uses
- Applications
- Application Area
- Product Applications
This material will not bleed, dry, harden or melt in normal industrial use and provides long-term material stability. It can be used for mounting semiconductor devices, power transistors, and diodes; coupling heat generating assemblies to chassis; heat transfer medium on ballast; thermal joints; and many electronics, automotive and electrical applications.
- Industrial Usage
These materials are intended for industrial use only, and the practices of good housekeeping, safety and cleanliness should be followed before, during and after use.
Properties
- Typical Properties
| Value | Units | Test Method / Conditions | |
| Specific Gravity | 2.4 | — | — |
| Consistency | Smooth Paste | — | — |
| Evaporation (at 200°C, 24 hrs) | 0.5 | %wt | — |
| Operating Temperature Range | -55 to 200 | °C | — |
| Thermal Conductivity | 2 | W/m °K | — |
| Thermal Resistance | 0.02 | °C-In/W | — |
| Dielectric Strength (0.05" gap) | 405 | Volts/mil | — |
| Dielectric Constant (at 1 kHz) | 4.5 | — | — |
| Dissipation Factor (at 1 kHz) | 0.003 | — | — |
| Volume Resistivity | 2x10^14 | Ω-cm | — |
Regulatory & Compliance
- Certifications & Compliance
Safety & Health
- Warning
Although the system contains low volatility materials, care should be taken in handling. Adequate ventilation of work place and ovens is essential. In case of skin contact, wash thoroughly with soap and water. For eyes, flush immediately with plenty of water for at least 10 minutes and seek medical attention.
Storage & Handling
- Shelf Life
- 1 Year
- Shelf Life
The shelf life of these materials is greater than one year when stored in unopened containers at an average temperature of 25°C.