company tower banner
Evonik Company Logo
ULTRASIL® 360 is a semi-active precipitated silica with a very low N2 surface area of approximately 55m²/g. It is particularly well-suited for use in extrusion, injection molding, calendaring mixtures, and soft roll processes. This product is easy to process, even at high filler loadings. When used in vulcanized rubber goods, ULTRASIL® 360 leads to lower residual deformation and excellent dynamic characteristics.

Functions: Reinforcement

Chemical Family: Silica

Processing Methods: Calendering, Extrusion, Injection Molding

Features: Excellent Mineral Filler Loading Capability, Good Processability, Low Compression Set, Vulcanizable

Knowde Enhanced TDS

Identification & Functionality

Chemical Family
Plastics & Elastomers Functions
Technologies
Chemical Description

SiO₂, synthetically produced amorphous silicon dioxide.

Features & Benefits

Applications & Uses

Markets
Plastics & Elastomers Processing Methods

Properties

Physical Form
Appearance
White powder
Physico-Chemical Properties
ValueUnitsTest Method / Conditions
Manganese Content¹max. 6ppmInternal Method
Copper Content¹max. 6ppmInternal Method
Iron Content¹max. 400ppmInternal Method
SiO₂ Content²min. 97%ISO 3262-19
Electrical Conductivity (4% in water)max. 1300µS/cmISO 787-14
Sieve Residue (Mocker 45 µm)max. 0.3%ISO 787-18
Tamped Density180g/lISO 787-11
pH Value (5 % in water)9ISO 787-9
Loss on Drying (2h at 105°C)5.5%ISO 787-2
Specific Surface Area (N₂, Multipoint)55m²/gISO 9277
Note

1) based on original substance
2) based on ignited substance (2 h/1000°C)
*) The given data are typical values. Specifications on request.

Regulatory & Compliance

Certifications & Compliance

Packaging & Availability

Packaging Information

Our silica products are inert and extremely stable chemically. However, due to their high specific surface area, they can absorb moisture and volatile organic compounds from the surrounding atmosphere. Therefore, we recommend storing the products in sealed containers in a dry, cool place, and removed from volatile organic substances. Even if a product is stored under these conditions, after a longer period it can still pick up ambient moisture over time, which could lead to its exceeding the specified moisture content. For this reason, our recommended use-by date is 24 months after date of manufacture. Product more than 24 months old should be tested for moisture content before use in order to make certain that it is still suitable for the intended application.

Storage & Handling

Shelf Life
2 years