Products

TEGO® Antifoam KS 95 is a self-emulsifying organic antifoam concentrate enhanced with minor amounts of organo-siloxanes for improved efficiency. This antifoam is well-suited for industrial applications, specifically as an anti-foaming agent, and finds utility in various processes including polymerization, wastewater treatment, and suspension polymerization.

AEROSIL® 300 is a hydrophilic fumed silica with a specific surface area of 300 m²/g.

AEROSIL® 380 is a hydrophilic fumed silica with a specific surface area of 380 m²/g.

AEROSIL® R 812 is hydrophobic fumed silica grade treated with HMDS (Hexamethyldisilazane). It can be used for sedimentation stabilization and due to its high hydrophobicity as defoaming agent.

SIPERNAT® 28 is a very finely milled, hydrophilic silica. It is primarily used as a thickening or free-flow agent in other applications.

AEROSIL® R 974 is hydrophobic fumed silica grades treated with DDS (Dichlordimethylsilane). The moderate hydrophobicity of these AEROSIL® products is suited for defoaming properties in the presence of appropriate hydrophobic liquids. They are recommended for improving the sedimentation stability of defoamer dispersions as well.

AEROSIL® R 106 is a hydrophobic fumed silica after treated with D4 (Octamethylcyclotetrasiloxane).

SIPERNAT® 340 is a medium sized silica with spherical particles and high oil absorption capacity (DBP). Is less dusty than small particle size flow agents, yet still gives good free flow improvement performance.

AEROSIL® R 816 fumed silica powder offers an alternative technology to stabilize oil/water emulsions. Due to the special surface modification of the silica both hydrophilic and hydrophobic properties are introduced in just one material. This enables AEROSIL® R 816 to enrich at oil/water interfaces and thereby stabilize oil droplets in a continuous water phase by the Pickering effect.Furthermore, AEROSIL® R 816 brings structure to the continuous water phase and increases its viscosity which limits the mobility of the oil droplets, thereby providing for even more emulsion stability.

AEROXIDE® TiO₂ P 25 isa fine-particulate, pure titanium dioxide (TiO₂) with high specific surface area and marked aggregate and agglomerate structure. Because of its high purity, high specific surface area, and unique combination of anatase and rutile crystal structure, the product is suitable for many catalytic and photocatalytic applications. Its structure also makes it suitable for use as an effective UV filter.

SIPERNAT® 26 is a very finely milled, hydrophilic silica. It is primarily used as a free-flow agent in other applications. SIPERNAT® 26 can also be used in-situ hydrophobized in defoamers. The use of an alkaline catalyst is recommended.

AEROSIL® R 8200 is a structure modified hydrophobic silica grade treated with HMDS (Hexamethyldisilazane). It is characterized by an extremely low thickening effect and high compacted bulk density. Its high hydrophobicity makes it suitable as a defoamer silica.

SIPERNAT® 45 S is a carrier silica with high absorbency that finds typical applications in rubber and plastic additives, plant protection formulations, and feed additives. Its benefits include improved flow properties in fine particle applications, faster production rates, and increased capacity.

AEROSIL® R 972 is hydrophobic fumed silica grade treated with DDS (Dichlordimethylsilane). The moderate hydrophobicity of these AEROSIL® products is suited for defoaming properties in the presence of appropriate hydrophobic liquids. They are recomended for improving the sedimentation stability of defoamer dispersions as well.

SIPERNAT® 35 is a very finely milled, hydrophilic, slightly alkaline silica, used in dry roast hydrophobized defoamer formulations.

SIPERNAT® D 10 is a milled hydrophobic (i.e., not wettable by water) silica. It is used in a great variety of defoamers due to its high effectiveness and ease of dispersion.

AEROXIDE® Alu C is a fine-particulate, pure aluminum oxide (Al₂O₃) with high specific surface area and marked aggregate and agglomerate structure. Because of it high purity and low water content, the product can be used well as an additive to anorganic materials, for heat insulation, and also as a catalyst substrate. The positive surface charge can be used to control the electrostatic charge.

AEROSIL® 200 HV is a hydrophilic fumed silica with a specific surface area of 200 m²/g.

SIPERNAT® D 13 is a milled, hydrophobic (i.e., not wettable by water) silica, high methanol wettability and low surface. It is used in a great variety of technical defoamers due to its high effectiveness and ease of dispersion.

AEROXIDE® Alu C 805 is a fine-particulate, fumed aluminum oxide (Al₂O₃) that is highly hydrophobized with an organosilane.

AEROSIL® R 208 is a fumed silica aftertreated with polydimethylsiloxane with excellent thickening properties.

SIPERNAT® 45 is a high-absorbency carrier silica that is capable of converting liquid active substances or solutions into powders. It has the ability to produce concentrates with up to 75% concentration. This carrier silica finds typical applications in rubber and plastic additives, plant protection formulations, and feed additives.

AEROSIL® 200 is a hydrophilic fumed silica with a specific surface area of 200 m²/g.

AEROSIL® R 202 is a hydrophobic fumed silica grade, treated with a polydimethylsiloxane. This product can be used in defoamer formulations for sedimentation stabilization and due to its high hydrophobicity as defoaming component.

AEROSIL® OX 50 is a fumed silica with a very low specific surface area, low thickening, and high purity. The product can be used as an additive or as a raw material. In polymer composites, high filler loading can be achieved, making it possible to control essential characteristics of polymers.