Knowde Enhanced TDS
Identification & Functionality
- Chemical Family
- Polymer Name
- Plastics & Elastomers Functions
- Technologies
Applications & Uses
- Applications
- Plastics & Elastomers End Uses
Properties
- Appearance
- Translucent
- Physical Properties
- Thermal Properties
- Processing Parameters
Value | Units | Test Method / Conditions | |
Melt Volume Flow Rate - MVR (300°C/1.20kg) | 9 | cm3/10min | ISO 1133 (JIS K7210) |
Mold Shrinkage - MD (2 mm) | 0.6 - 0.8 | % | Idemitsu Method |
Mold Shrinkage - TD (2 mm) | 0.6 - 0.8 | % | Idemitsu Method |
Water Absorption (24h, 50% RH) | 0.2 | % | ISO 62 |
Density | 1.18 | g/cm3 | ISO 1183 |
Value | Units | Test Method / Conditions | |
Linear Thermal Expansion Coefficient (1.8 MPa) | 124 | °C | ISO 75-1,2 (JIS K7191-1,2) |
Deflection Temperature Under Load | 7 | ×10-5/°C | ISO 11359-2 |
Value | Units | Test Method / Conditions | |
Pre-drying Timings | 5.0 - 8 | h | — |
Pre-drying Temperature | 120 | °C | — |
Cylinder Temperature | 270 - 310 | °C | — |
Mold Temperature | 80 - 110 | °C | — |